Pneumatic Components — Page 17

AFC/BFC Series Two-Unit Air Preparation Assemblies
AFC/BFC series two-unit assemblies are air preparation components for pneumatic systems. They combine a filter and a pressure regulator to filter and purify compressed air and maintain a stable pressure; some models can also be fitted with a lubricator. AFC denotes the A series, while BFC denotes the B series. Port sizes range from 1/8″ to 1/2″, corresponding to the 1500, 2000, 3000, and 4000 series. Drain options are differential-pressure drain (blank), manual drain (M), and automatic drain (A). Pressure gauge options are with gauge (blank), without gauge (N), MPa (1), or psi (2). Filtration ratings are 40μm (blank) or 5μm (W). Thread options include PT thread (blank). These products are widely used in automated equipment, pneumatic control circuits, and other applications.

BFC Series Two-Piece Air Preparation Unit
The BFC series two-piece air preparation unit combines a filter and a pressure regulator to filter compressed air, maintain stable pressure, and separate oil and water. It is widely used in automated equipment, pneumatic production lines, and similar applications. Port sizes of 1/8″, 1/4″, 3/8″, and 1/2″ correspond to sizes 1500, 2000, 3000, and 4000, respectively. Drain options are differential pressure drain (blank), manual drain (M), and automatic drain (A). The pressure gauge can be included (blank) or omitted (N), with gauge units selectable as MPa (1) or psi (2). Standard filtration is 40μm (blank), with 5μm (W) available as an option. The default thread type is PT. Construct the model number in the following order: series code + port size + drain type + pressure gauge code + pressure gauge unit + filtration rating + thread type code.

AFR/BFR Series Filter Regulators
AFR/BFR series filter regulators filter compressed air and reduce and stabilize pressure in pneumatic systems, combining moisture separation, filtration and pressure regulation in one unit. Port sizes include 1/8″, 1/4″, 3/8″ and 1/2″, corresponding to sizes 1500, 2000, 3000 and 4000. Drain options include differential-pressure, manual and automatic drainage. Filtration ratings are 40μm and 5μm. Units are available with or without a pressure gauge, with gauge ranges including 1 MPa and 2 psi. The default thread type is PT. The model code consists of the series designation, port size, drain type, pressure gauge code, gauge range, filtration rating and thread type code, making it easy to select a model for the system's requirements.

BFR Series Filter Regulator
The BFR series filter regulator combination is the filtering and pressure-reducing unit in a two-piece air preparation assembly. It removes water and dust from compressed air while reducing and stabilizing pressure, and is commonly paired with a lubricator in two- or three-piece air preparation assemblies. Four port sizes are available: 1500 (1/8"), 2000 (1/4"), 3000 (3/8"), and 4000 (1/2"). Drain options are differential pressure drain (blank), manual drain (M), and automatic drain (A). Filtration ratings are 40μm (blank) or 5μm (W). A pressure gauge can be included (blank) or omitted (N), with pressure units in MPa or psi. The default thread is PT. The A series corresponds to AFR and the B series to BFR; both use the same coding rules but differ in design.

AF/BF Series Air Filters
AF/BF series air filters are used for air preparation in pneumatic systems. They are generally installed at the inlet of an air preparation unit to remove moisture, oil mist, and solid dust from compressed air, protecting downstream pneumatic components such as solenoid valves and cylinders. Two series are available by port size: the AF series has small ports, with 1500 (1/8") and 2000 (1/4") sizes; the BF series has larger ports, with 3000 (3/8") and 4000 (1/2") sizes. Drain options are differential-pressure drain (no designation) and manual drain (M); the BF series also offers automatic drain (A). Filtration ratings are 40μm (no designation) and 5μm (W). Thread options are PT (no designation), G (G), and NPT (T). The model number is formed by directly joining the series code, port size, drain type, filtration rating, and thread code in that order. For example, AF2000MW denotes the AF series, a 1/4" port, manual drain, and 5μm filtration.

AR/BR Series Pressure Regulators
AR/BR series pneumatic pressure regulators (pressure-reducing valves) reduce and stabilize compressed air pressure in air preparation systems, providing a stable working pressure for downstream pneumatic actuators and logic components. Models are available by port size: AR1500(1/8″), AR2000(1/4″), BR3000(3/8″), and BR4000(1/2″). Pressure ranges include the standard type (0.9MPa) and low-pressure type L (0.4MPa). Options include pressure gauge codes (blank = with gauge, N = without gauge), thread codes (blank = PT thread, G = G thread, T = NPT thread), bracket codes (blank = with bracket, J = without bracket), and gauge scale units (1 = MPa, 2 = psi, 3 = bar, 4 = kgf/cm² & psi). The die-cast aluminum alloy body features a pressure adjustment handwheel and a panel-mount design for easy installation and maintenance. The regulator can be combined with a filter and lubricator from the same series to form a three-piece air preparation unit.

AL/BL Series Air Lubricators
AL/BL series air lubricators add an oil mist to compressed air in pneumatic systems, supplying small amounts of lubricating oil to components such as cylinders and solenoid valves to reduce wear on moving parts. The series includes the AL standard type (0.9MPa) and the BL low-pressure type (0.4MPa), which can be selected according to the air supply pressure. Model numbers combine the series code, port size, thread type, pressure gauge scale, and other designation fields. Thread options are blank for PT thread, G for 3 thread, and T for NPT thread; pressure gauge scales are available in MPa or kgf/cm² & psi. These lubricators are commonly combined with a filter and pressure regulator to form an air preparation unit, installed downstream of the air compressor and upstream of the operating components.

GC Series FRL Units
GC Series FRL units combine an air filter, pressure regulator, and lubricator to provide centralized air preparation for pneumatic systems. The filter removes moisture and solid contaminants from compressed air, the regulator maintains the supply pressure at the working pressure, which can be read on a pressure gauge, and the lubricator introduces oil into the airflow to lubricate downstream cylinders and pneumatic tools. The series comes in four sizes—GC200, GC300, GC400, and GC600—with port sizes of 1/8", 1/4", 3/8", and 1/2". PT, G, and NPT threads are available to suit different piping systems. A pressure gauge is optional, with dial scales available in MPa, psi, bar, or kgf/cm²&psi for use in both domestic and export equipment. The three components are typically assembled as modular units and can be installed together or separated for individual use. They are widely used at air supply inlets for automated equipment, packaging machinery, automotive assembly lines, and other applications.

GFC Series Two-Unit Combinations and Filter Regulators
The GFC series two-unit combinations and filter regulators are air preparation components from Hetian Pneumatic of China. They combine a filter, pressure regulator, and, where applicable, a lubricator to clean compressed air and regulate its pressure. The series includes two configurations: two-unit combinations (filtering + pressure regulation) and filter regulators (filtering + pressure regulation). Model codes consist of segments such as the main model (e.g., GF200), port size (e.g., 08), and thread type (e.g., M). Accessories such as pressure gauges and brackets are also available. These products are suitable for automation equipment, pneumatic control systems, and similar applications.

GR Series Pressure Regulators
GR series pressure regulators, also known as pressure reducing valves, regulate air supply pressure in pneumatic systems. They reduce inlet pressure and stabilize it at a set value, providing constant operating pressure to downstream components such as cylinders and solenoid valves. The series comprises four sizes based on port diameter: GR200, GR300, GR400 and GR600. Four type codes are available: blank (standard type), L (low-pressure type), J (without bracket, standard configuration) and H (standard manual type). These options accommodate conventional pressure regulation, precise low-pressure regulation and different mounting methods. The catalog provides the ordering code example GR200 08 L □ F 1 G K, whose positions represent the series code, port size, type code and other options, such as accessories, threads, pressure gauge and exhaust method. Combine the appropriate options in each position to create the complete ordering code. During installation, ensure that the inlet and outlet directions match the arrow. Turn the adjustment knob clockwise to increase pressure and counterclockwise to decrease it; release pressure before adjustment. The J type does not include a bracket and can be connected directly to the piping. Select a configuration with a bracket if panel or bracket mounting is required.

SL Series Lubricators
SL series lubricators are lubrication components used in pneumatic air preparation assemblies (filter-regulator-lubricator or filter-lubricator units). They atomize lubricating oil and introduce it into the compressed air to lubricate downstream components such as cylinders, pneumatic motors and air valves, reducing friction and wear and extending service life. Their modular design allows them to be combined with filters, pressure regulators and other components. The model code consists of the series designation SL and a two- or three-digit port size code: 200 corresponds to 1/4", 300 to 3/8", and 400 to 1/2", covering low- to medium-flow air lines. Select the port size based on the pipe fitting threads and required flow rate, and pay attention to the lubricator's installation orientation and oil level in the bowl.

HT Series Pneumatic Motors (Cylindrical)
The HT series consists of cylindrical, straight-body pneumatic motors powered by compressed air. They can replace electric motors in challenging environments where flammable or explosive materials, moisture, or dust are present. The motors have a cylindrical housing and a 1:1 reduction ratio, with a direct-drive output shaft. The current catalog lists two models, HT-060M and HT-100M. At maximum power, the HT-060M delivers 0.93 HP and 2.2 N·m of torque, with a rated speed of 3000 rpm and air consumption of 630 L/min. The HT-100M delivers 1.5 HP and 4.1 N·m of torque, with a rated speed of 3000 rpm and air consumption of 1120 L/min. Select a model based on the required horsepower, torque, rated speed, and air supply capacity (L/min). Ensure that the air supply pressure and pipe bore are sufficient to meet the motor's air consumption requirements.

SCV Series Spray Valves
SCV series spray valves control on/off flow and switching in spray lines for coatings, paints, and other fluids. The series includes 2-way and 3-way valve types for applications such as single-line spray control and two-line switching (spray/return or switching between two coatings). Connection sizes include common 1/8", 1/4", 1/2", and 2" options, compatible with standard pneumatic and fluid piping systems. The model number starts with the fixed prefix SCV1, followed by a digit indicating the valve type (2=2-way, 3=3-way). The two digits after the hyphen indicate the connection size (for example, 00=1/4", 01=1/8", 20=2"), making it easy to select a model by function and pipe size. These valves are suitable for automated spray lines, coating equipment, and general industrial fluid control. When selecting a model, confirm both the valve type (number of ways) and connection size codes.

HCY Series Magnetically Coupled Rodless Cylinders
The HCY series consists of magnetically coupled rodless cylinders with a direct-mount design and built-in magnetic rings. Magnetic force transmits motion between the piston and the external slider without contact or a piston rod. This makes the cylinders shorter and more compact, with no risk of external leakage. They are suitable for long-stroke linear reciprocating motion in clean or dusty environments. The catalog lists two series, HCY1R and HCY3R, with bore sizes of 6, 10, 15, 20, and 25 mm to suit different load and thrust requirements. Magnetic holding force is available in two levels, H (high holding force) and L (low holding force), to provide the appropriate resistance to decoupling under different loads. Specify the stroke according to the application. The guide rail is available with a switch rail (leave the code blank) or without a switch rail (N). The switch rail has a built-in magnet and accommodates a magnetic switch for stroke-end position detection. Z73 is a commonly used magnetic switch model.

HFR Series Pivot-Type Pneumatic Grippers
The HFR series consists of pivot-type pneumatic grippers whose fingers open and close around a pivot point. They are suitable for gripping, holding, transferring, and positioning workpieces. Five bore sizes are available: 10, 16, 20, 25, and 32 mm. Two mounting options are offered: standard and through-hole mounting in the opening and closing direction (N), allowing flexibility based on available space and routing requirements. Compact in design, these grippers provide smooth, reliable operation and are widely used in automated assembly, sorting, and loading and unloading. The model code consists of the HFR series designation, bore size, and mounting type. For example, HFR-20 denotes a standard gripper with a 20 mm bore. Larger bores provide greater gripping force but also increase overall dimensions, so selection should take both workpiece weight and available mounting space into account.

HFCIYIX Series Pneumatic Grippers (Parallel Opening and Closing / Cylindrical Body)
The HFCIYIX series consists of parallel-opening pneumatic grippers with a cylindrical body. A double-acting cylinder drives the two jaws to open and close in parallel, keeping them aligned throughout their travel. Suitable for gripping square, round, and irregularly shaped workpieces, these grippers are widely used on automated production lines, as robotic end effectors, and at loading, unloading, and assembly stations. The cylindrical body facilitates recessed mounting and multidirectional piping, while jaw attachments can be added to accommodate different workpiece shapes. Selection criteria typically include bore size, opening and closing stroke, gripping force, repeatability, operating pressure range, maximum operating frequency, port size, and mounting dimensions. This page is only the catalog cover or title page for the series; detailed specifications, external dimensions, and model numbering rules are not provided.

HMF Series Wide-Body Air Gripper (Parallel Opening and Closing)
The HMF series is a wide-body parallel air gripper. Its two fingers move synchronously toward or away from each other in a straight line, providing a wide gripping surface and rigid guidance. It is suitable for gripping wide workpieces or those requiring a longer gripping surface. For the same stroke, the wide body provides a larger mounting reference surface and greater resistance to off-center loads. Two-finger, three-finger and other multi-finger configurations are available, along with various jaw attachments, for automated assembly, handling and positioning. Key selection criteria include bore size (gripping force), opening and closing stroke, repeatability, operating pressure, actuation type (single-acting/double-acting), and accessories such as magnetic switches and jaw attachments. Note: The catalog table on this page is blank and does not provide specific models, dimensions or parameters. Refer to the complete catalog page for specifications.

HDW Series Pneumatic Gripper (Heavy-Duty Mechanical Gripper)
The HDW series pneumatic gripper (heavy-duty mechanical gripper) is a slim pneumatic actuator used to grasp and hold workpieces in industrial automation. Its mechanical clamping design provides high gripping force, good rigidity, and high repeatability. The slim profile saves mounting space, making it suitable for confined spaces. This series is typically driven by a pneumatic cylinder and uses a mechanical linkage to open and close the jaws in parallel or with a swinging motion. It can be fitted with a variety of jaw attachments. When selecting a model, consider the gripping force, opening and closing stroke, and the weight and shape of the workpiece.

HFK Series Parallel Pneumatic Grippers with Guide Rails
HFK series parallel pneumatic grippers feature roller guide rails for parallel gripping and transfer of workpieces in automated equipment. They offer high rigidity, high repeat positioning accuracy, and stable gripping force. The series is available in three action types: HFK standard double-acting roller type, HFSK single-acting normally closed roller type, and HFTK single-acting normally open roller type. Bore sizes are 10, 16, 20, 25, 32, and 40 mm. Available gripper configurations include standard, side-mount, through-hole mount, bottom-mount, narrow-jaw, side-mount with narrow jaws, and through-hole mount with narrow jaws, accommodating different installation spaces and jaw layouts. When selecting a model, specify the series code, bore size, and gripper configuration. Some mounting and jaw options are limited to certain bore sizes.

HFSK Series Guided Parallel Pneumatic Gripper (Single-Acting, Normally Closed, Roller Type)
The HFSK series guided parallel pneumatic gripper (single-acting, normally closed, roller type) belongs to the HFK pneumatic gripper family. It uses a roller-type linear guide to provide parallel opening and closing of its two jaws, with high rigidity and repeat positioning accuracy. It is suitable for automated workpiece gripping, handling, positioning, and similar applications. The family comprises three types by operating mode: HFK (standard double-acting roller type), HFSK (single-acting, normally closed roller type), and HFTK (single-acting, normally open roller type). The single-acting, normally closed type uses spring force to remain clamped if the air supply is lost, providing a fail-safe holding function. Bore sizes are 10, 16, 20, 25, 32, and 40 mm. Available versions include standard (blank), through-hole mounting (N), bottom mounting (F), narrow jaw (R), side mounting with narrow jaws (W), and through-hole mounting with narrow jaws (M). W and M are available only for bore sizes 10~25 mm; the other versions are available across the full 10~40 mm bore range. Users can select side-mounting, through-hole mounting, bottom-mounting, narrow-jaw, or other versions to suit the available equipment space and workpiece shape.

HFTK Series Parallel Pneumatic Gripper with Guide Rail (Single-Acting, Normally Open, Roller Type)
The HFTK series is a single-acting, normally open roller-type parallel pneumatic gripper with a guide rail. Part of the HFK family, it shares the same model coding system and external design as the standard double-acting HFK and single-acting, normally closed HFSK. An integrated linear guide rail and roller guides provide parallel opening and closing of the two fingers, high rigidity, and accurate repeat positioning for gripping, positioning, and transferring small workpieces. Six bore sizes are available: 10, 16, 20, 25, 32, and 40 mm, selectable according to the required gripping force and workpiece size. Mounting and jaw options include standard (blank), side mounting, through-hole mounting N, bottom mounting F, narrow jaw width R, side mounting with narrow jaw width W, and through-hole mounting with narrow jaw width M, to suit different mounting spaces and gripper layouts. The single-acting, normally open design remains open when air pressure is lost, making it suitable for applications where the workpiece must be released during a power outage.

HDS/HRS Series Pneumatic Grippers (Y-Type Mechanical Grippers)
The HDS/HRS series pneumatic grippers (Y-type mechanical grippers) are available in two operating types: HDS driven type and HRS single-acting, normally open type. They are suitable for gripping, positioning and handling workpieces. Bore sizes are 10, 16, 20, 25 and 32 mm. Mounting fixture options: blank (no mounting fixture), HM (inner-ring mounting), HB (outer-ring mounting). Sensor options: blank (no sensor), 5G (CS-5G), 5GN (CS-5GN), with 1 or 2 sensors available. Order models are specified by combining the series code, bore size, mounting fixture, sensor type and quantity, for example HDS20-HM.

HSMZ Series Three-Position Rotary Cylinder
The HSMZ series is a range of three-position pneumatic rotary cylinders designed to rotate and position loads at three preset angles. Typical automation applications include workpiece flipping, indexing and fixture rotation. Cylinders of this type are generally driven by dual-piston or dual-rack mechanisms and use internal or external stops, limit screws and cushioning mechanisms to ensure reliable positioning at the intermediate and both end positions. Features include adjustable angles, high repeatability and smooth end-of-stroke cushioning. Key selection criteria include bore size, rotation angle range, intermediate positioning angle, port thread, operating pressure and mounting configuration. This page provides only the series and product names; specific bore sizes, angle ranges, ordering code rules and model lists are not provided. Consult the full catalog for detailed specifications.

HMGK Series Rotary Cylinders
The HMGK series consists of rack-and-pinion rotary cylinders. Compressed air drives the rack in a linear motion, which is converted into reciprocating rotation by the pinion and output shaft. They are suitable for automated applications such as workpiece flipping, indexing, valve operation, and fixture rotation. The series is available in medium, compact, and compact with switch configurations, with series designations HMGK-1, HMGK-2, HMGK-1R, and HMGK-2R. Three mounting styles are available: SD basic, FA top flange, and FB bottom flange, allowing direct mounting or flange attachment to different machine frames. Bore sizes include 20, 25, 32, and 63. Output shaft options are T single-ended and T2 double-ended, allowing loads to be driven from one end or synchronously from both ends. Two common rotation angles are available: 90° and 180°. Select the bore size, mounting style, shaft type, and rotation angle based on load torque, required rotation angle, and available installation space.

HMC Series Rotary Clamping Cylinder
The HMC series is a pneumatic rotary clamping cylinder. Its piston first extends linearly, then rotates through a set angle in the specified direction to clamp the workpiece. When released, it rotates in the opposite direction to reset. It is suitable for welding fixtures, machining positioning, assembly tooling, and other applications requiring fast clamping and clearance. Key selection parameters include mounting/connection type (A: threaded holes at both ends; B: through-holes), bore size (12, 16, 20, 25, 32), stroke (10, 15, 50, etc.), rotation direction (R: clockwise; L: counterclockwise), and clamp arm type (blank: single-sided clamp arm; D: double-sided clamp arm). Accessory and magnetic sensor switch codes (such as Z and A93) can also be appended. Select the bore size based on the required clamping force, the stroke and rotation direction based on the clearance available around the workpiece, and the clamp arm and mounting type based on the fixture design.

HACK Series Swing Clamp Cylinders
HACK series swing clamp cylinders rotate before pressing down to clamp workpieces quickly. They are commonly used for positioning and clamping at welding, assembly, and machining stations. Available types include double-acting and double-sided clamp arm models. Rotation codes are L (left-hand rotation during the downward stroke) and R (right-hand rotation during the downward stroke). Common bore sizes are 25 mm and 32 mm, with rotation angles of 90° and 180°. Clamp arm options are single-sided (blank code) and double-sided (code D). Port threads are available as PT (blank code, standard) or G (code G). The model number combines the series code HACK, rotation code, bore size, rotation angle, and thread code in that order, as in HACK-L25×90-G. The cylinder body is generally made of anodized aluminum alloy, and the operating medium is filtered compressed air. Compatible magnetic switches and mounting accessories are optional.

HSC Series Rotary Clamping Cylinder
The HSC series rotary clamping cylinder is designed for automated fixtures that require rotation before clamping. The model code consists of the series designation HSC, rotation direction (L left/R right), bore size (25/32), stroke (e.g., 15), and clamp arm type (blank for single-sided/D for double-sided). Bore sizes are 25 and 32 mm, with a common stroke of 15 mm. Single-sided and double-sided clamp arms are available. The cylinder is commonly used in tooling fixtures, positioning and clamping applications, and assembly line jigs, using pneumatic power to rotate and clamp. When selecting a model, confirm the rotation direction, bore size, stroke, and clamp arm type to ensure compatibility with the available fixture space and required clamping force.

HSRC Series Rotary Cylinder
The HSRC series consists of pneumatic rotary cylinders that turn the output shaft clockwise or counterclockwise. They are commonly used for workpiece turning, rotary clamping, indexing, and other automated applications. The series code identifies the connection type: A has threaded holes at both ends, while B has through-holes. Bore sizes include 12, 16, 25, and 32, with selection based on stroke requirements. Rotation options are R (clockwise) and L (counterclockwise). Mounting options include no mounting accessory or a rear cover flange connection plate. When selecting a cylinder, confirm the series code, bore size, stroke, rotation direction, and mounting accessory to ensure an accurate fit with the fixture and mechanism.

HQCK Series Swing Clamp Cylinder
The HQCK series comprises pneumatic swing clamp cylinders. The piston rod first extends in a straight line and then rotates through a set angle, moving the clamp arm to secure the workpiece quickly. These cylinders are commonly used in welding fixtures, machining jigs, and automated assembly stations. The catalog gives HQCK-L-32×10-S-M-FB as an example of a complete model code: HQCK is the series designation, followed by the rotation direction (L for left / R for right), bore×stroke (bores 25 and 32, with 10 as an example stroke), function codes such as S, M, and FB, and a final option marker (shown as □ in the original). Clamp arm options are blank (single-sided clamp arm) and D (double-sided clamp arm). When selecting a cylinder, confirm the bore, stroke, rotation direction, clamp arm type, and mounting accessories to ensure that the clamping force and rotation angle suit the workpiece and fixture design.

HMGG Series Guided Cylinders
HMGG series guided cylinders use guide rods for pneumatic applications requiring resistance to off-center loads and precise linear guidance. Bearing options are M (plain bearing) or L (ball bearing), and mounting options are B (basic type) or F (front flange type). Bore sizes are 20, 25, 32, 40, 50, 63, 80, and 100 mm, with stroke selected to suit the application. The model code consists of the series designation, bearing type, mounting type, bore size, and stroke, making it easy to select the right configuration for the operating conditions.

HCQM Series Compact Cylinders
The HCQM series compact cylinder is a pneumatic actuator with a slim design that saves installation space. The series is available in various bore sizes (such as 12, 16, 20, and 32mm), with customizable stroke lengths (25mm shown as an example). Options include versions without a built-in magnetic ring, with a built-in magnetic ring, or with dual rods. Mounting styles include through-hole (basic type), threaded holes at both ends, and foot mounting to meet different installation requirements. Operating type codes B, A, and L correspond to different mounting styles. Suitable for automated equipment, fixtures, packaging machinery, and other applications.

HCDU Series Free-Mount Cylinders
The HCDU series free-mount cylinder is a slim pneumatic actuator whose body can be mounted from multiple directions. It is commonly used in automated fixtures and tooling where space is limited and flexible mounting orientation is required. The series is available under various codes based on the built-in magnetic ring configuration, including HMD, HMSD, HMTD, HMDD, HMDJ, HMCJ, HMSJ, HMTJ, and HCJP. Five bore sizes are available: 6, 10, 16, 20, and 25 mm. Stroke is indicated by three codes: blank, S, and T. Magnet options are blank (without magnet) and S (with magnet); an external magnetic switch can be fitted for position detection. Port thread codes are blank (PT thread) and G (NPT thread), accommodating different piping requirements in domestic and export markets. To specify a complete model, combine the codes in this order: series code + bore size + stroke + magnet code + thread code. The cylinder body is typically made of anodized aluminum alloy, offering low weight and good rigidity. It can be mounted from the front, side, bottom, and other directions, making it suitable for light- to medium-duty applications such as electronics assembly, packaging machinery, and inspection fixtures.

HMD Series Multi-Mount Cylinders
The HMD series consists of compact, low-profile multi-mount cylinders that can be mounted directly from multiple sides without additional mounting accessories. They are suitable for clamping, pushing and positioning in confined spaces. The series includes HMD, HMSD, HMTD, HMDD and HMDJ models, distinguished by their construction and magnetic ring configuration. Standard models do not include a magnet; the code S indicates a built-in magnetic ring, allowing an external magnetic switch to detect position. Common bore sizes include 6, 10, 16, 20, 25 and 32 mm, with stroke lengths selected to suit the application. Air port threads are available in PT (default, blank code) or NPT (code G). The model number combines the series code, bore, stroke, magnet code and thread code in that order. For example, HMD 32×30 S indicates an HMD series standard cylinder with a 32 mm bore, 30 mm stroke and magnet. These cylinders are widely used in automated assembly lines, packaging machinery, electronic equipment, jigs and fixtures.

HMSD Series Free-Mount Cylinders
Free-mount cylinders are compact, square-body cylinders that can be mounted in multiple orientations. Multiple mounting faces make them easy to install in confined spaces. The series includes versions with a built-in magnetic ring, allowing external magnetic switches to detect position. Common bore sizes are 6, 10, 16, 20, 25, and 32 mm, with strokes selected to suit the application. Each bore size is available with or without a magnet, and PT, G, and NPT thread options accommodate fittings used in different countries and regions. The series includes HMD, HMSD, HMTD, HMDD, HMDJ, HMCJ, HMSJ, HMTJ, and HCJP variants with different mounting styles and body designs. They are widely used in automation applications such as electronics assembly, packaging, and fixtures.

HMTD Series Free-Mount Cylinders
HMTD series free-mount cylinders are designed for pushing, clamping, positioning and other applications in space-constrained automation equipment. The model designation includes the series code, bore, stroke, magnet code and thread type code. The cylinder is available without a magnet or with a built-in magnetic ring (S), and with PT, G or NPT threads. Common bore sizes are 6, 10, 16, 20 and 25 mm, and the stroke is specified to suit the application. Magnetic switches can be used for position detection.

HMDD Series Free-Mount Cylinders
The HMDD series free-mount cylinder is a pneumatic actuator with a built-in magnetic ring. It supports multiple mounting orientations and is suitable for clamping, pushing, positioning, and other applications in automated equipment. The catalog lists series codes including HMD/HMSD/HMTD/HMDD/HMDJ, with bore sizes of 6, 10, 16, 20, 25, and 32 mm. Stroke length can be selected according to model requirements. Magnet options are without a magnet or with a magnet (S), and thread options are PT or NPT (G). The ordering code combines the series code, bore size, stroke, magnet code, and thread code in that order for easy selection and ordering.

HMDJ Series Free-Mount Cylinders
The HMDJ series consists of free-mount cylinders with an integrated magnetic ring structure. They can be mounted and secured in multiple directions, making them easy to arrange in confined spaces. Bore sizes include 6, 10, 16, 20, 25 and 32 mm. The stroke is specified according to application requirements (30 mm in the catalog example), and a magnet can be selected as needed for use with magnetic switches. Port thread options are PT (blank), G (G) and NPT (T), accommodating piping standards in different countries and regions. Compact and flexible to install, these cylinders are commonly used for short-stroke pushing, clamping and positioning in automated applications such as small fixtures, electronics assembly, packaging and inspection fixtures. To specify the complete model number, combine the codes in the order “series code—bore size—stroke—magnet code—thread code.”

HMCJ Series Free-Mount Cylinders
The HMCJ series free-mount cylinder is a slim pneumatic actuator with mounting holes on all four sides of the body, allowing direct mounting in any orientation without dedicated brackets. This makes it easy to install at various angles in confined spaces. The series includes HMCJ, HMSJ, HMTJ, HMDJ, and HCJP models, classified by mounting style and construction, with bore sizes of 6, 10, 16, 20, and 25 mm and strokes selected to suit the application. The aluminum alloy cylinder body is lightweight and rigid. An optional internal magnetic ring (magnet code S) enables position detection with a magnetic switch; leave the code blank for a cylinder without a magnet. Port thread options are PT (default, blank code), G, and NPT, accommodating piping standards in different countries and regions. To order, combine the codes in the sequence “series code—bore—stroke—magnet code—thread code.” For example, HMD 32×30 S denotes a cylinder with a 32 mm bore, a 30 mm stroke, and a magnet. The series is widely used for clamping, pushing, positioning, and lifting in automated applications such as electronics assembly, packaging, fixtures, and inspection equipment.

HMSJ Series Free-Mount Cylinder
The free-mount cylinder body can be mounted from the front, rear, top, bottom, or sides without dedicated mounting accessories, saving installation space and assembly time. The catalog specifies a five-part model code: series code (HMD, HMSD, HMTD, HMDD, HMDJ, HMCJ, HMSJ, HMTJ, HCJP), bore size (6, 10, 16, 20, 25 mm), stroke code, magnet code (blank means no magnet; S means with magnet), and thread code (blank means PT thread; G and NPT threads are also available). Models with a built-in magnetic ring can be fitted with magnetic switches for piston position detection. Bore sizes of 6~25 mm cover compact, light-duty applications, including clamping, pushing, stopping, and positioning on electronics, packaging, and automated assembly lines.

HMTJ Series Free-Mount Cylinders
The HMTJ Series Free-Mount Cylinder is a compact pneumatic actuator that can be mounted from multiple directions. Its body has mounting holes for direct installation in confined spaces without additional brackets. The catalog lists bore sizes of 6, 10, 16, 20, and 25mm, among others. An internal magnetic ring can be selected as needed (blank: without magnet; S: with magnet) for use with a magnetic switch for position detection. Port thread options include PT (blank), G, and NPT (T), accommodating fittings used in different regions. The same family also includes the HMD, HMSD, HMTD, HMDD, HMDJ, HMCJ, HMSJ, and HCJP series. When ordering, combine the codes in the sequence “series code + bore size + magnet code + thread code.” The series is widely used in automation applications such as electronics assembly, packaging, and fixture positioning.

HCJP Series Free Mount Cylinders
The HCJP series free mount cylinder is a compact pneumatic actuator that can be mounted in multiple orientations, making it suitable for automation fixtures, conveying systems, and positioning mechanisms where space is limited. Available bore sizes are 6, 10, 16, and 20 mm, with stroke length selected to suit the application. Magnet options include without a magnet or with a magnet (S), and thread options include PT, G, and NPT. Its lightweight design and flexible mounting hole arrangement allow it to be integrated directly into equipment or mounted on a bracket.

HMG Series Stainless Steel Mini Cylinder
The HMG series consists of stainless steel mini cylinders with stainless steel bodies and major components for good corrosion and rust resistance. They are suitable for applications where installation space and corrosion resistance matter, including compact automation equipment, fixtures, electronics assembly, and food and packaging machinery. Compact and lightweight, these mini cylinders are typically available in a range of bore and stroke combinations, with options for single- or double-acting operation and a magnetic ring for use with magnetic switches. Mounting options include basic, front flange, rear flange and foot mounting. Port threads are generally small sizes such as M5. The specific model is selected primarily according to bore, stroke, operating mode, mounting style and whether a magnetic switch is required. This page provides only the series name and product name; detailed specifications and model codes are not listed.

HMF Series Stainless Steel Mini Cylinder
The HMF series is a compact, lightweight pneumatic actuator. Its cylinder barrel and main exposed components are made of stainless steel for corrosion resistance, making it suitable for installations where space is limited and rust resistance is required. The catalog specifies sizes as bore × stroke, with common sizes including 20×50 and 32×50 (20 mm and 32 mm bores with a 50 mm stroke). Letter codes indicate additional options: S denotes a magnetic switch (magnetic ring), and CM denotes the mounting type. When selecting a model, first determine the bore and stroke, then add the magnetic ring and mounting accessory codes as needed. The operating medium is clean compressed air. Before installation, verify that the stroke, mounting method and load direction are compatible. The series has a simple structure and is easy to maintain. It is widely used for clamping, pushing, positioning and stopping in automated equipment for electronics, packaging, food and medical devices.

HSU Series Standard Cylinders
HSU series standard cylinders feature concealed tie rods and are available in 32, 40, and 50 mm bore sizes. Configurations include standard (concealed tie-rod), double-rod, and double-rod with adjustable stroke. Mounting options include basic, CA rear cap mount (single clevis), CB rear cap mount (double clevis), FA front cap mount (front flange), FB rear cap mount (rear flange), TC intermediate trunnion mount, and TCM1 intermediate trunnion mount (for intermediate mounting). Cylinders are available with or without a magnet. Seal materials include TPU, fluororubber, NBR, and PTF, and port threads are available in G or NPT. They are suitable for automated equipment requiring linear reciprocating motion with a standard stroke.

HSE Series Standard Cylinders
The HSE series comprises standard pneumatic cylinders designed for general-purpose actuation. They convert compressed air pressure into reciprocating linear motion and are widely used for pushing, clamping, lifting, conveying, and positioning in automated equipment. The catalog uses a model code structured as “series code + bore + stroke + mounting type”: the series code identifies the product family (HSE), the bore determines the output force and body cross-sectional dimensions, the stroke determines the effective working length, and the mounting type determines the installation method, such as basic, front flange, rear flange, foot, or clevis mounting. When selecting a cylinder, first choose the bore based on the load and required force, then determine the stroke based on the actual travel distance, and finally select the mounting type according to the available installation space and direction of force. Suitable mounting accessories and sensing devices, such as magnetic switches, can also be used. This page provides a series overview and model code explanation; see subsequent pages for bore specifications, stroke tables, and external dimensions.

HGGA/HGGB Series Standard Cylinders
HGGA/HGGB series standard cylinders are general-purpose, double-acting linear cylinders. The HGGA is uncushioned, while the HGGB is cushioned. Available bore sizes are 63, 80, 100, 125, 160, 180 and 200 mm, with stroke lengths of 250, 320, 400, 500, 600 and 800 mm. When ordering, specify the magnetic ring designation as needed (a blank indicates no internal magnetic ring). One to three optional magnetic switches can be fitted to detect end-of-stroke positions and provide feedback signals. The cushioned model incorporates cushioning at the ends of the stroke to absorb impact, reduce operating noise and extend cylinder life. Compact and easy to install, these cylinders are widely used for reciprocating linear movements in automation equipment, including pushing, lifting, clamping, positioning and transfer. They can be combined with solenoid valves, air preparation units and magnetic switches to form a complete pneumatic control system.

HRSQ Series Stopper Cylinder
The HRSQ series is a fixed mounting height stopper cylinder designed to stop and position workpieces on conveyor lines. Its cylinder center height remains fixed after installation, facilitating rapid production line changeovers and alignment. Bore sizes include 16, 20, 32, 40, and 50. The Φ16 and Φ20 models use M5 port threads, while Φ32 and larger models offer Rc, NPT, and G port thread options. Two mounting styles are available: B (through-hole mounting) and A (threaded-hole mounting at both ends). Versions with or without a built-in magnetic ring can be selected as needed. Models with a magnetic ring can be paired with A73 or other magnetic switches for position detection, with a choice of 1 or 2 switches. The stroke is selected according to operating conditions. The D-shaped rod end withstands workpiece impact and provides cushioned stopping.

HTWH Series Stopper Cylinder
The HTWH series stopper cylinder is a pneumatic actuator used to stop and precisely position workpieces or pallets on automated conveyor lines and at assembly stations. Series codes include HTWH, HTDH, HTTH, and HTTM. Bore sizes are 20, 25, 32, 40, 50, 63, and 80mm, with the stroke selected to suit operating conditions (30mm in the catalog example). The magnet option is available without a magnet (blank) or with a magnet (S) for position detection by a magnetic switch. The self-locking option is available without self-locking (blank) or with self-locking (F); the latter maintains the stopping position if the air supply is lost, improving safety. The thread type code specifies the mounting thread. Applications include logistics sorting, assembly line positioning, and stopping and releasing items.