Pneumatic Components — Page 16

Transition Fittings
Transition fittings connect and adapt different thread sizes, thread types (PT/NPT), or male and female threads in piping systems. They are commonly used in pneumatic, hydraulic, and fluid lines. This series includes RB reducing bushings (male-to-female connections of different sizes), MET male elbows, E female elbows, SE male-to-female elbows, T female tees, and MT male tees. Six thread sizes are available: 1/8, 1/4, 3/8, 1/2, 3/4, and 1. Model numbers consist of a type code and a size code, such as RB-02-01, MET-02, E-02, SE-02, T-02, and MT-02. Selection parameters include the thread sizes at both ends, overall dimensions, minimum bore, and width across flats. Choose according to the pipe bore and available installation space. Materials and surface finishes depend on the supplied specifications.

RB Type Reducing Nipple
The RB type reducing nipple is a male-to-male reducing adapter with PT/NPT male threads at both ends. It directly connects different pipe thread sizes, providing transitions from 1/8 to 1 inch. The catalog lists 13 common sizes, from RB-02-01 to RB-08-06, by P and P1 end combinations. It also specifies overall length E (20~35 mm), minimum bore F (7~22 mm), and hex width across flats (14~35 mm) to aid selection and installation. The product is suitable for reducing connections in pneumatic, hydraulic, and general fluid piping systems.

MET Series Male Elbows
The MET male elbow is an adapter fitting for 90° turns in piping, with PT/NPT male threads at both ends (MALE×MALE, double male). The catalog lists six thread sizes—1/8, 1/4, 3/8, 1/2, 3/4, and 1—corresponding to models MET-01, MET-02, MET-03, MET-04, MET-06, and MET-08. The last two digits of the model number increase with thread size. Key dimensions include the thread sizes P/P1 at both ends, opening size E (5~21mm), and width across flats S (19.8~45.2mm). Select the model according to the pipe thread size, then check the opening and width across flats against the available installation space. This series can be combined with other adapter fittings on the same catalog page, including RB bushings, E female elbows, SE male-female elbows, T female tees, and MT male tees, to form a complete piping connection solution.

E-Type Female Elbow
The E-type female elbow is an adapter fitting used to connect two pipe sections at a right angle. Both ends have female PT/NPT threads. The catalog lists models E-01, E-02, E-03, E-04, E-06, and E-08 in nominal sizes of 1/8, 1/4, 3/8, 1/2, 3/4, and 1 inch, respectively, with different E dimensions and L lengths. The fitting is suitable for pneumatic, hydraulic, and general industrial piping. Select the appropriate thread size for installation, and ensure proper sealing and tightening torque. Dimensions in the table are in mm, and thread types are PT/NPT.

SE Series Male-to-Female Threaded Elbow
The SE series male-to-female threaded elbow is a 90° adapter with a male thread on one end and a female thread on the other. It changes the direction of air, water, oil, and other fluid lines while providing a threaded transition. The series is available in six thread sizes: 1/8, 1/4, 3/8, 1/2, 3/4, and 1, corresponding to models SE-01, SE-02, SE-03, SE-04, SE-06, and SE-08. The catalog lists E (bore), L (length), and S (hex across flats) dimensions for each size to facilitate selection and space checks. Compact and easy to install, these elbows are suitable for factory automation pneumatic systems and general-purpose fluid lines.

T Series Female Tee Transition Fittings
The T series female tee is a transition fitting with three female-threaded ports, used to split one pipeline into two. It is commonly used in air, water, oil and other fluid systems. The fittings have PT/NPT tapered pipe threads and are available in six nominal sizes: 1/8, 1/4, 3/8, 1/2, 3/4 and 1, corresponding to models T-01, T-02, T-03, T-04, T-06 and T-08. The catalog specifies three dimensions: A (overall length), E (distance from the threaded end face to the center of the tee/opening size) and L (center length). For example, T-01 has A = 40.0mm, E = 8mm and L = 20.0mm, while T-08 has A = 94.4mm, E = 29mm and L = 47.2mm. When selecting a fitting, first determine the nominal size and model based on the pipeline thread specification, then check that the A/E/L dimensions fit the available installation space. Combined with transition fittings on the same page, such as elbows (E type and SE type), male tees (MT type) and reducing bushings (RB type), they can form

MT Male Threaded Tee
The MT male threaded tee is an adapter fitting with PT/NPT male threads on all three ports. It is used to split or combine flows in pneumatic or fluid piping systems. The catalog offers six thread sizes—1/8, 1/4, 3/8, 1/2, 3/4 and 1—corresponding to MT-01, MT-02, MT-03, MT-04, MT-06 and MT-08. Depending on the size, overall dimension A ranges from 39.6~90.4 mm, opening E from 5~21 mm and length L from 19.8~45.2 mm, making it easy to select a fitting for the available space and flow requirements. This standard adapter is suitable for equipment piping and maintenance replacement.

BZ/BP/BP-G Series Adapter Fittings
The adapter fitting series includes three types: BZ external hex, BP internal hex, and BP-G internal hex with G threads. They provide threaded transitions and connections in pneumatic and fluid lines. BZ models have an external hex design and are available in sizes 1/8~3/4; BP models have an internal hex design and are available in sizes 1/8~3/4; BP-G models have an internal hex design with G (parallel) threads and are available in sizes G1/8~G3/4. Dimensions including width across flats A, hex height H, and overall length L are provided for each size to simplify selection and installation. These fittings are widely used to connect lines in compressed air and pneumatic systems.

PU Series Polyurethane Tubing
PU series tubing is made of polyester-based polyurethane with a hardness of 95A-98A. It is suitable for conveying air and other pneumatic fluids, with an ambient and fluid temperature range of -20℃~+80℃. Its resistance to pressure, weather, corrosion and repeated bending makes it an ideal flexible hose for pneumatic connections. Metric sizes range from 4~16mm in outer diameter (2.5~12mm inner diameter), while inch sizes range from 5/32~1/2″. Standard roll lengths are 100m or 200m. Burst pressure at 20℃ is 24~30Bar, and the minimum bend radius is 10~55mm, increasing with tube diameter to accommodate the pressure and routing requirements of different pneumatic circuits.

PUC Series Polyurethane Tubing
PUC series polyurethane tubing is made from polyester-based polyurethane (PU) with a hardness of 95A-98A. It is suitable for air, with an ambient and fluid temperature range of -20℃~+80℃. In addition to retaining all the properties of standard PU tubing, it is lightweight, flexible, durable, easy to extend and retract, and simple to use. It is widely used to convey compressed air in pneumatic systems and can be used with push-in fittings for quick connections. When ordering, specify series PUC, outer diameter, inner diameter, length (1M), color, and whether push-in fittings are required. Color options are blue BU, transparent C, orange O, black B, green G, yellow Y, and red R. For push-in fittings, select Blank for no fittings.

PA6/PA12/PA11 Series Nylon Tubing
The PA6/PA12/PA11 series of nylon tubing is pneumatic tubing extruded from polyamide (nylon), commonly used to convey air and other fluids. Nylon offers high strength, good pressure resistance, abrasion resistance and resistance to common chemical corrosion. It is also flexible with a small bend radius, making it suitable for compact routing inside equipment. Compared with PU tubing, it is slightly more rigid but has a higher pressure capacity. Sizes are specified as outer diameter × inner diameter (mm). The series is available in seven common sizes: 4×2.5, 6×4, 8×6, 10×8, 10×7.5, 12×10 and 12×9. The 10×7.5 and 12×9 sizes are thin-walled versions, providing a larger flow area for the same outer diameter. Standard supply is 100M or 200M per roll, and the tubing can be cut to length as needed. For on-site installation, use a TC-01 tube cutter for clean, even cuts and connect the tubing to push-in fittings and pneumatic components.

AG Series Air Guns
AG Series air guns are handheld pneumatic tools for blowing away dust, chips and water and performing other air cleaning tasks. They connect directly to a factory compressed air line and are commonly used in machining, assembly, electronics manufacturing and packaging lines to quickly remove residue from workpiece surfaces, equipment crevices and fixtures. The series includes three models: AG110, AG250 and AG300. Three nozzle types are available—short, medium and long—to suit the available workspace, blowing distance and required air force. Short nozzles are suitable for localized cleaning at close range, while long nozzles can reach into cavities or blow debris away from a distance. The guns are lightweight, comfortable to hold, easy to operate, provide even airflow and offer good durability. When selecting a model, consider the air supply operating pressure, air consumption, inlet thread specification and required nozzle length. This catalog page lists only the models and nozzle types; it does not specify the nozzle length, inlet thread, operating pressure or air consumption for each model. Confirm these details with the manufacturer before ordering.

DG Series Air Blow Guns
DG series air blow guns are handheld pneumatic tools for blowing, cleaning, and cooling with compressed air. They connect to workshop compressed air lines via push-in or threaded connections and are available with short, medium, or long nozzles for different working distances and applications, including narrow gaps, deep holes, and wide-area blow-off. Models are distinguished by nozzle length: DG-10-S has a short nozzle, DG-10-M has a medium nozzle, and DG-10-L has a long nozzle. The final letters S/M/L correspond to Short/Middle/Long nozzle, respectively. The catalog lists this series alongside pneumatic line accessories such as PU tubing, nylon tubing (PA6/PA12/PA11), push-in fittings, and tube cutters, which can be combined to form a complete pneumatic circuit from the air supply to the end device. Key selection parameters include nozzle length, connection size, and working fluid (air). Choose the nozzle length according to the blow-off distance and available installation space, and match the fitting to the air supply line specifications.

A-F Type Pneumatic Silencers
A-F type pneumatic silencers (exhaust silencers) are installed in the exhaust ports of pneumatic solenoid valves, cylinders, pneumatic tools, and air lines. Their porous sintered structure reduces airflow noise during compressed air discharge while allowing air to escape freely without significantly affecting operating speed. They are available in six types, A, B, C, D, E, and F, according to their shape and mounting configuration. Type A is a straight threaded design (including M5 and 01~16 sizes), type B is the SB series, type C is the C series, and types D/E/F are the SU series. The numeric suffixes indicate connection thread sizes (such as 01, 02, 03, 04, 06, and 10) for air lines of different pipe diameters. Most have brass or sintered bronze/engineering plastic bodies and screw directly into the threaded exhaust port. They offer a compact design, effective noise reduction, and low airflow resistance.

A/B Series Japanese-Style One-Hand Quick Couplings – Socket
The A/B Series Japanese-style one-hand quick coupling sockets feature a push-pull design for quick connection and disconnection with one hand. They are suitable for pneumatic lines, pneumatic tools, and cooling water lines. The body has an outer diameter of Φ26.5mm and is available with SF (hose nut with spring), SM (male thread), SH (hose barb), and SP (hose barb) end connections, accommodating 1/4, 3/8, and 1/2 BSP threads and Φ4~Φ13 hoses. Available in 10/20/30/40 nominal sizes, they have a working length of 52~74mm and hex widths across flats of 19~25mm. They mate with plugs in the same series and Japanese-style quick couplings of the same nominal size.

C Series Japanese-Style One-Handed Quick Couplings
C Series Japanese-style one-handed quick couplings (C-type quick couplings) are one-touch connectors for pneumatic lines. They consist of a female body (socket) and a male body (plug), and can be connected or disconnected with a one-handed push or pull. Female types include SF hose connection nut with spring, SM male thread, SH hose barb, and SP hose barb. Male types include PF hose connection nut with spring, PM male thread, and PH hose barb. Size codes 10/20/30/40 correspond to different nominal bores. The female body has a maximum outside diameter of Φ26.5 mm and a hex width across flats of SW 19~25 mm, with mounting threads of 1/4'BSP, 3/8'BSP, and 1/2'BSP. The male body has a stem diameter of Φ11 mm and fits hoses with inside diameters of Φ9~Φ13 mm. Key dimensions include overall length L, outside diameter ΦD, mating length L1, width across flats SW, and thread size MT. These couplings provide quick connection and disconnection for air and other general-purpose fluid lines.

YT Series Fittings
The YT series fittings include YT-400PF, YT-600PF, YT-800PF, NYT-400PH, and NYT-600PH models for industrial piping connections. The catalog provides dimensions including L, ΦD, L1, SW, and MT. PF models feature 1/2'BSP, 3/4'BSP, or 1'BSP male threads, while PH models are available in Φ15 and Φ21 sizes. Select a model using the table for applications requiring standardized threaded interfaces and hexagonal mounting features.

NYT Series Fittings
NYT series fittings are designed for piping connections in factory automation systems. The catalog lists two models: NYT-400PH and NYT-600PH. The series is defined by dimensional parameters including L (length), ΦD (outside diameter), L1 (mating length), SW (width across flats), and MT (connection diameter), making it easy to select a model based on installation space and pipe diameter. The compact fittings are suitable for connecting and adapting pneumatic or fluid lines. This page provides only a partial dimension table and does not specify material, pressure rating, or thread standards. Verify these details against the physical product or complete catalog before selection.

AZ Series Quick Couplings
AZ series quick couplings are designed for compressed air connections in pneumatic lines that require frequent connection and disconnection. The catalog lists three models: AZ-20SF, AZ-30SF, and AZ-40SF, with 1/4 BSP, 3/8 BSP, and 1/2 BSP threaded ports, respectively. Their overall lengths L are 52, 53, and 55 mm; head diameter ΦD is 26.5 mm for all three; L1 dimensions are 17.5, 18.5, and 20 mm; and hex widths across flats SW are 19, 21, and 25 mm, respectively. Select a model based on thread size, line bore, and available installation space. The dimensions in the table can be used to check coupling clearance and wrench access.

MLV/MLY Series Quick Couplers with Aluminum Sockets
The MLV/MLY series comprises quick couplers with aluminum sockets, including MLV, MLY, SMV, SMY, A-SMV, A-SMY, A-SMV-N and A-SMY-N models, available in 1/4″, 3/8″ and 1/2″ sizes. The corresponding AZ-SF series aluminum sockets (AZ-20SF, AZ-30SF and AZ-40SF) have 1/4 BSP, 3/8 BSP and 1/2 BSP threads, respectively, with overall lengths of 52/53/55 mm, a coupler outside diameter of Φ26.5 mm, widths across flats of 19/21/25 mm and insertion lengths of 17.5/18.5/20 mm. Designed for quick connection and disconnection of pneumatic lines, these products are easy to install, provide a reliable seal and are widely used in automation equipment, pneumatic tools and air systems.

SMV/SMY Series Quick Couplings with Aluminum Sockets
The SMV/SMY series consists of quick couplings with aluminum sockets for quickly connecting and disconnecting hoses and equipment in pneumatic lines. The catalog lists SMV, SMY, A-SMV, A-SMY, A-SMV-N, and A-SMY-N configurations, all with aluminum sockets and available in 1/4″, 3/8″, and 1/2″ sizes. The aluminum socket construction makes these couplings lightweight, corrosion-resistant, and easy to connect and disconnect. They are commonly used for air supply connections on air compressors, pneumatic tools, line outlets, and automated equipment. Select the model based on the coupling configuration and pipe diameter, and consult the relevant specification table to confirm dimensions and thread standards.

A-SMV/A-SMY Series Quick Couplers with Aluminum Sockets
The A-SMV/A-SMY series consists of quick couplers with aluminum sockets, available in A-SMV and A-SMY types and their A-SMV-N and A-SMY-N variants. Featuring an aluminum alloy body (socket) and a quick-connect mechanism, these couplers enable easy connection and disconnection of injection mold cooling circuits, mold temperature control circuits, and pneumatic and hydraulic hoses, with a reliable seal. Compatible hose sizes (SIZE) are 1/4″, 3/8″ and 1/2″; the corresponding aluminum socket female mounting threads are 1/4 BSP, 3/8 BSP and 1/2 BSP. Aluminum socket part numbers AZ-20SF, AZ-30SF and AZ-40SF correspond to these three sizes, respectively. Overall lengths L are 52/53/55 mm, body outside diameter ΦD is 26.5 mm for all three, mounting section lengths L1 are 17.5/18.5/20 mm, and widths across flats SW are 19/21/25 mm. Similar series, including MLV/MLY and SMV/SMY, are also listed on the same page. Select the appropriate model by matching the hose size and thread specification.

A-SMV-N/A-SMY-N Series Aluminum-Socket Quick Couplings
This series of pneumatic quick couplings features aluminum socket bodies. A-SMV-N and A-SMY-N are listed together in the catalog and are available in 1/4″, 3/8″, and 1/2″ sizes. The aluminum socket combines light weight with corrosion resistance, making it suitable for quick connection and disconnection of factory compressed-air lines, pneumatic tools, and equipment. When selecting a coupling, confirm the male or female connection, thread type, pipe diameter, and whether a valve is required. The MLV/MLY, SMV/SMY, and A-SMV/A-SMY series on the same page provide references for similar designs with different materials or functions.

SML Series Quick Couplings
SML/SMV series pneumatic quick couplings provide quick connections and disconnections between hoses and equipment in air lines, with one-handed operation and automatic sealing. The coupling features an aluminum alloy socket and a compact, pressure- and wear-resistant design. The range includes standard quick couplings (SML), A-SML quick couplings with aluminum sockets, and A-SMV swivel quick couplings in M male-thread and F female-thread versions. The swivel design rotates to prevent hose tangling. The models are available in multiple sizes, with 1/4″, 3/8″, and 1/2″ thread options. They are widely used for quick connections in factory automation pneumatic circuits and in lines leading to pneumatic actuators.

A-SML Series Quick Couplers
The A-SML series comprises quick couplers for pneumatic lines in three types: SML is the basic quick coupler, A-SML has an aluminum socket, and A-SMV is a swivel quick coupler that rotates 360°, available in M (male) and F (female) connection types. The series is divided into four size codes, 2, 3, 4, and 5, covering three common inch-based pipe sizes: 1/4", 3/8", and 1/2". These couplers provide quick connection and disconnection for air compressors, pneumatic actuators, blow-off cleaning, and automated equipment air lines. They combine aluminum sockets with copper/steel coupler bodies for easy connection and disconnection, reliable sealing, pressure resistance, and low flow loss. The A-SMV swivel type turns freely in pressurized lines to prevent hose kinking and reduce wear. Select the model based on pipe size (1/4", 3/8", or 1/2"), coupler type (straight/swivel and male/female), and socket material.

A-SMV Series Swivel Quick Coupler
The A-SMV series swivel quick coupler is a pneumatic line connector that rotates 360°. Its freely rotating body relieves torsional stress at the hose-to-tool connection, preventing hose kinks, tangling, and premature fatigue damage. The series is available in four body sizes, designated 2, 3, 4, and 5, each offered in three bore/thread sizes: 1/4″, 3/8″, and 1/2″. Two connection types are available: M (male/plug) and F (female/socket). They mate with compatible quick couplers of the same size for quick connection and disconnection of pneumatic lines on air compressors, pneumatic tools, blow guns, and automation equipment. Designed for compressed air, the coupler locks and seals automatically when the plug is inserted into the socket. To disconnect, press the sleeve with one hand. The swivel design allows rotation under pressure, making it suitable for routing lines in confined spaces and applications requiring frequent connection and disconnection. Select the appropriate combination based on the air line bore, connection type (male/female), and mating coupler size.

SU Series Pneumatic Quick Couplings
The SU series pneumatic quick couplings comprise SU3 female-threaded sockets (model suffix SF) and SU5 hose plugs (model suffix PH). The two connect to each other for quick connection and disconnection of air lines. The SU3 is a straight female-threaded socket with 1/4'NPT, 3/8'NPT, or 1/2'NPT port threads, a body outer diameter of Φ22mm, an overall length of 46~50.5mm, and a width across flats of 19~25mm. It connects to male-threaded fittings or equipment ports. The SU5 is a plug with a hose connection, a body outer diameter of Φ7.9mm, an overall length of 43~48mm, and a width across flats of 13mm. It fits pneumatic tubing with outer diameters of Φ6.35, Φ8, or Φ10mm. Compact and easy to connect or disconnect with one hand, these couplings provide reliable sealing and low flow resistance. They are widely used for quick air line changes in pneumatic tools, air compressor lines, automation equipment, and tooling and fixtures. Select the model according to the port thread size (SU3) or tubing outer diameter (SU5), and check that the overall length and width across flats fit the available installation space.

SE Series Pneumatic Quick-Connect Fittings
The SE series consists of compact straight push-in pneumatic fittings for quickly connecting tubing to components in pneumatic lines. The SE-2PF, SE-3PF, and SE-4PF models listed here have a Φ9.9 fitting body and a hex width across flats of SW 13 mm. They fit tubing outside diameters of Φ6.35, Φ8, and Φ10 mm, respectively (corresponding to 1/4″, 5/16″, and 3/8″). Key dimensions include overall length L (35.5~45.5 mm), body diameter ΦD, insertion/body length L1 (16~20 mm), hex width across flats SW, and compatible tubing outside diameter ΦH. Model codes follow the format SE-size-type: sizes 2/3/4 correspond to the three tubing diameters, respectively, and type PF denotes a straight fitting. Compact and easy to install and remove, these fittings are widely used in pneumatic connections for automation equipment, pneumatic actuators, and air systems.

ASCO Series Solenoid Valves
ASCO series solenoid valves are directional control valves with die-cast bodies and inlets machined on a machining center. Imported seals are standard throughout the series, providing reliable sealing and responsive switching for directional control of various pneumatic actuators. Model numbers begin with A (e.g., A3V210-08, A4V210-08, A4S210-08, A4S310-08, A4M310-08, A4V310-10, and A4V410-10). The series includes two-way and five-way, direct-acting and pilot-operated valves, with some models convertible between 5/2 and 3/2 configurations. The numeric suffix indicates the port size (e.g., -08 corresponds to 1/4 inch and -10 to 3/8 inch). A new wiring-free coil is available for an additional 2 yuan per valve. Commonly used in automation equipment, fixtures, and pneumatic control circuits, these valves share mounting dimensions with the 4V and 4M series for easy replacement and maintenance.

VZ/VF Series Solenoid Valves
VZ/VF series solenoid valves are designed for pneumatic control. The catalog lists models VZ5120, VZ5220, VF3130, VF3230, VF5120, and VF5220, with respective port sizes of 1/8, 1/8, 1/4, 1/4, 3/8, and 3/8. The series is suitable for directional control and on/off switching in pneumatic systems and can be used with common air preparation components and actuators. Select the valve according to the port thread size and required valve body model.

MVSD Series Solenoid Valves with Die-Cast Bodies
MVSD series solenoid valves feature die-cast bodies and imported seals as standard. Models include MVSD180, MVSD220, MVSD260, MVSD300, MVSD460 and MVSD600, with port sizes of 1/8, 1/4, 3/8, 1/2, 3/4 and 1 inch. Each model is available in -4E1 and -4E2 configurations for different pneumatic control circuits. These high-flow valves are easy to install and commonly used in automation equipment, door pumps and tool-release cylinders.

SY Series Solenoid Valves
SY series solenoid valves are pilot-operated five-port valves with a compact design, high flow rate, and fast response. They are widely used in pneumatic control circuits for automated equipment. The die-cast valve body and standard imported seals provide a long service life. Port sizes include M5, 1/8, and 1/4, with coil voltage options of DC24V, DC12V, and AC220V to meet different electrical control requirements. The numbers in the model designation indicate the series size and function code. The valves can be used with a variety of manifolds and bases. They are suitable for cylinder actuation and directional control in machinery, electronics, packaging, food, and other industries.

TSV Series Hand Lever Valves
TSV series hand lever valves (manually operated directional control valves) control airflow and change its direction in pneumatic systems by moving a lever. They are commonly used for manual control where electrical power is unavailable, as well as during equipment commissioning and maintenance. The series offers two operating types based on the reset and locking mechanism: M denotes mechanical locking, where the lever is held in the operating position by a mechanical mechanism and does not return when released. This is suitable for applications requiring sustained pressure or a maintained airflow state. S denotes spring return, where the lever automatically returns to its initial position when released. This provides momentary (self-resetting) operation and improved safety. Catalog specifications are given by port thread size. Both TSV9832 and TSV8652 models listed on this page are available with 1/4 ports for use with 1/4-inch (approximately G1/4) pneumatic fittings. The valve body uses a plate-mounted or pipe-connected hand lever design. Select the nominal bore according to the actual line flow, operating pressure, and medium (filtered and oil-mist-lubricated compressed air), and confirm the required number of positions and ports and the reset type before ordering.

VX Series Solenoid Valves
VX series solenoid valves are designed for pneumatic control lines in factory automation. The VX2120 sub-series listed in the catalog includes four port sizes: VX2120-06, VX2120-08, VX2120-10, and VX2120-15, with 1/8″, 1/4″, 3/8″, and 1/2″ pipe ports, respectively. Select the port thread size to match the piping. These valves are suitable for pneumatic circuits requiring electrically controlled on/off or directional switching. Detailed specifications such as operating voltage, working pressure, flow rate, valve body material, and protection rating are not provided on this page. Confirm these details using the complete catalog, nameplate, or supplier technical documentation before making a selection.

Festo-Type Air Preparation Units (OU/OFR/OL Series)
The Festo-type air preparation range includes OU two-piece units, OFR filter regulators, OU pressure regulators and OL lubricators, with a maximum operating pressure of 1.6MPa. Available in MINI, MIDI and MAXI sizes, with port threads of 1/8″, 1/4″, 3/8″, 1/2″, 3/4″ and 1″, these products provide compressed air filtration, pressure reduction, pressure regulation and oil-mist lubrication. Bowl and exterior colors include orange, blue and green. They are commonly combined in air preparation units for automated equipment or used as maintenance replacements.

OU Series Two-Piece Air Preparation Units
OU Series two-piece air preparation units are Festo-type units combining a filter regulator and a lubricator. They filter compressed air, reduce and regulate pressure, and provide oil mist lubrication, with a maximum operating pressure of 1.6MPa. The series is available in three sizes: MINI (miniature), MIDI (medium), and MAXI (large). Six port thread sizes are offered: 1/8", 1/4", 3/8", 1/2", 3/4", and 1", accommodating air systems with different pipe diameters. Matching components include the OFR filter regulator (filtration + pressure regulation) and the OL lubricator, which can be used separately or combined as a two-piece unit. Bowl colors are available in orange, blue, and green to distinguish functional sections or identify piping. Install in the sequence air inlet → filtration and pressure regulation → oil mist lubrication. These units are widely used for upstream air preparation in pneumatic systems for automation equipment, packaging machinery, and assembly lines.

OFR Series Filter Regulator
The OFR series filter regulator is a FESTO-type air preparation component that serves as the filter and pressure regulator unit in two-piece or three-piece air preparation assemblies. It filters compressed air and regulates pressure in compressed air lines. The maximum operating pressure is 1.6MPa, and six port thread sizes are available: 1/8", 1/4", 3/8", 1/2", 3/4", and 1". Body sizes include MINI (miniature), and the unit can be combined with OU pressure regulators and OL lubricators from the same series to form two-piece or three-piece assemblies. Bowl colors are available in orange, blue, and green for easy line identification and coordinated appearance. It is suitable for air purification and pressure stabilization in automated equipment, pneumatic fixtures, packaging machinery, and other applications.

OL Series Air Lubricators
OL series air lubricators are Festo-type air preparation components with a maximum working pressure of 1.6MPa. They introduce lubricating oil mist into compressed air to lubricate actuators such as cylinders, air motors, and pneumatic tools. Three housing sizes are available based on flow capacity and port specifications: MINI (miniature), MIDI (medium), and MAXI (large). Six port thread sizes are available: 1/8", 1/4", 3/8", 1/2", 3/4", and 1". They can be combined with OU two-piece units, OFR filter regulators, and OU pressure regulators from the same series to form a complete air preparation unit. Housings are available in orange, blue, or green to suit color-coding requirements. To select a model, first choose the size (MINI/MIDI/MAXI) based on system flow and pipe diameter, then specify the port thread size and housing color.

SMC Series Air Preparation Units
SMC series air preparation units (maximum operating pressure 1MPa) provide compressed air filtration, pressure regulation, oil mist lubrication, and combined air preparation. They are commonly installed upstream in pneumatic circuits on automated equipment. The series includes AC three-piece and two-piece units, AW filter regulators, AF air filters, AL lubricators, AR pressure regulators, and combination units and components such as BC, BFC, BF, BL, and AFR. Port sizes include 1/8", 1/4", 3/8", 1/2", 3/4", 1", G1/4, G3/8, and G1/2. Their modular design allows components to be combined and installed to meet filtration, pressure regulation, and lubrication requirements.

SC Series Standard Cylinders
SC series standard cylinders are general-purpose, double-acting tie-rod cylinders with square aluminum bodies. They are among the most widely used basic actuators in factory automation, serving applications such as clamping, pushing, lifting, stopping and transferring. The cylinder body is typically made from extruded aluminum alloy, with four tie rods connecting the end caps to the barrel. This simple design makes maintenance easy. Piston rods are generally made of hard chrome-plated carbon steel or stainless steel, with wear-resistant nitrile rubber seals. The main selection criteria are bore size (commonly φ32, φ40, φ50, φ63, φ80 and φ100), stroke and mounting style (basic, front/rear flange, foot, clevis, etc.). Magnetic switches can be added for position detection, and some models support adjustable cushioning and air cushioning. This catalog page provides only a blank framework for the stroke-to-specification table and does not list specific bore sizes, stroke values or complete model codes. Actual specifications should be checked against other pages of the full catalog or confirmed with the manufacturer.

VHS Series 3-Port Manual Residual Pressure Relief Valve
The VHS series is a 3-port manual residual pressure relief valve used as a safety and maintenance component in pneumatic systems. It is typically installed downstream of the air preparation circuit and upstream of the actuators. Before inspection or maintenance, it manually shuts off the air supply while venting residual compressed air from downstream piping through the exhaust port. This quickly depressurizes the piping and actuators, such as cylinders and pneumatic grippers, to zero pressure, preventing injury from unexpected actuator movement caused by residual pressure and supporting safe work procedures such as lockout/tagout (LOTO). A typical design consists of a three-port valve body with a manual knob or a handle with a lock hole, an air inlet (P), an outlet (A), and an exhaust port (R). When turned to the closed position, the valve shuts off the inlet and connects the outlet side to the exhaust port. Common selection criteria include port thread size (such as 1/4, 3/8, 1/2, or 3/4), effective flow area and flow rate, operating pressure range, operating temperature range, and mounting style (in-line or panel-mounted). The source text on this page provides only the series name and product name in Chinese and English; it does not list specific model codes, dimension tables, or ordering codes.

AR Series Pressure Regulators
AR series pressure regulators are pneumatic air preparation components used to reduce and stabilize pressure in compressed air lines. An adjustment mechanism sets the outlet pressure, providing stable operating pressure to downstream pneumatic actuators. The catalog page covers models including AR10-A, AR20-B, and AR30, with segments such as AR30-□, 03, B, E, -□, and B indicating selection details such as port size, pressure range, thread type, and mounting accessories. They are commonly used upstream of cylinders, pneumatic clamps, air blow-off devices, and control valves. When selecting a model, confirm the port size, pressure setting range, thread specification, accessories, and mounting method. Because the OCR information from the page is limited, refer to the complete catalog for specific pressure ratings and flow parameters.

AC Series Filter Regulator and Lubricator Units
AC series units combine a filter regulator and a lubricator to clean, regulate and lubricate the air supply in pneumatic systems. They are commonly used as air preparation units in factory automation circuits. The series includes models such as AC10A-A and AC20A-B to meet different flow and port requirements, and can be used with other air preparation components on this page, including AR regulators and AW filter regulators. When selecting a unit, consider port size, pressure adjustment range, filtration rating, drain type and mounting accessories.

AW Series Filter Regulators
The AW series filter regulator combines an air filter and a pressure regulator in a single air preparation unit. It removes moisture, oil mist, and solid contaminants from compressed air while providing continuously adjustable, stable downstream pressure. Common models include the AW20-B and AW60-B. The series is typically part of an air preparation product line that also includes AR series pressure regulators and AC series two-piece combinations. When selecting a model, consider the port thread, filtration rating, maximum operating pressure, pressure adjustment range, and drain type. These units are suitable for upstream air preparation in pneumatic control circuits serving cylinders, pneumatic valves, and pneumatic tools.

AC Series FRL Unit
The AC Series FRL unit combines a filter, regulator, and lubricator to clean, regulate the pressure of, and lubricate compressed air. The catalog provides the model code example AC30C-□03DE-□-□B, with sections for the series, size, port size, drain type, accessories, and mounting configuration. The port size table lists codes 01~10 and 20~60, corresponding to pipe connection sizes from 1/8" to 1 1/2". Select the appropriate combination based on actual flow rate, pipe size, and accessory requirements. For options not detailed on this page, refer to the manufacturer's selection guide.

AL Series Lubricators
AL series lubricators are air preparation components that atomize lubricating oil and introduce it into compressed air to lubricate downstream actuators, such as cylinders and pneumatic motors, reducing wear. They are available in five series sizes based on body bore: 1000, 2000, 3000, 4000, and 5000. Port sizes include M5, 1/4″, 3/8″, 1/2″, 3/4″, and 1″, accommodating piping needs from miniature pneumatic circuits to medium- and high-flow applications. The model code consists of “AL + series code + port size.” When selecting a model, first choose the 1000~5000 series based on the required flow rate and installation space, then select the port size code according to the female pipe thread. Lubricators are commonly combined with filters and pressure regulators as air preparation units, but can also be installed individually upstream of the point of use.

AC Series Air Preparation Units
AC series air preparation units (F.R.L. units) combine an air filter, pressure regulator and lubricator to filter, regulate and lubricate compressed air at the inlet of a pneumatic system. The series offers differential-pressure, manual and automatic drain options, with filtration ratings of 40μm or 5μm, optional pressure gauges in MPa or psi, and PT port threads. Common sizes include the 1000, 1500, 2000, 3000, 4000 and 5000 series, with port sizes of M5, 1/8″, 1/4″, 3/8″, 1/2″, 3/4″ and 1″. Automatic-drain models can use the simplified code AC-[series]-[port size]-D.

BC Series Air Preparation FRL Units
The BC Series air preparation unit (F.R.L. Filter, Regulator, Lubricator Combination) is a B Series compressed-air filtration and pressure regulation assembly consisting of a filter with a pressure regulator connected in series with a lubricator. It removes water and dust, regulates pressure, and provides lubrication in pneumatic systems. It is widely used at the air inlets of automated production lines, machine tools, packaging equipment, and assembly equipment. The series is available in four port sizes: 1500 (1/8"), 2000 (1/4"), 3000 (3/8"), and 4000 (1/2"), with dimensions corresponding to the equivalent A Series (AC) sizes. Three drain types are available: differential-pressure drain (blank code), manual drain (M), and automatic drain (A). Pressure gauge options are with gauge (blank, with a 1 MPa or psi dual-scale gauge) or without gauge (N). Filtration ratings are 40μm (blank) and 5μm (W). The default thread type is PT. The entire series is ordered using a seven-part code: series code + port size + drain type + pressure gauge code + gauge pressure unit + filtration rating + thread type code.