Pneumatic Components — Page 8

CQ2 Series Cylinders

CQ2 Series Cylinders

CQ2 series cylinders are compact aluminum alloy pneumatic actuators with bore sizes from 12~100mm and standard strokes from 5~100mm (in 5mm increments). The cylinder barrel is made of 6063-T5 aluminum alloy, the front and rear covers and piston are made of 6061 aluminum alloy, the piston rod is medium-carbon steel with a hard coating, the seals are NBR, and the piston nut is carbon steel. The operating medium is air, and the cylinders are available in double-acting or single-acting configurations (spring return/spring extension). Maximum operating pressure is 1.5MPa(15.3kgf/cm²), ambient and fluid temperature is 5~60℃, piston speed is 50~500mm/s, and stroke tolerance is ±10mm. No lubrication is required. The standard rod end has a female thread, with a male thread available as an option. Standard mounting is by through-holes, with female threads at both ends available as an option. Port sizes are M5×0.6, 1/8, 1/4, and 3/8. Magnetic switches and seal kits are also available as options.

CQ2 Series Compact Cylinder (Long Stroke)

CQ2 Series Compact Cylinder (Long Stroke)

The CQ2 Series compact cylinder (long stroke) is a pneumatic actuator with a compact axial profile, suitable for installations where space is limited. Longer strokes can be selected as needed for automated operations such as fixture clamping, workpiece handling, positioning, pushing, and stopping. The catalog lists standard bore sizes of 32, 40, 50, 63, 80, and 100 mm. Specifications are organized by bore size and include operation type, operating pressure range, operating temperature range, ambient temperature range, ambient humidity range, and ambient pressure range. Compact cylinders are typically double-acting, extending and retracting through pneumatic pressure control. Various mounting accessories and knuckle joints are available for connecting loads. Select the bore and stroke based on the load, required force, and stroke length, and ensure a clean air supply and adequate lubrication.

CQ2 Series Compact Cylinders

CQ2 Series Compact Cylinders

The CQ2 series compact cylinder features a compact design and short axial length, making it suitable for applications where space is limited. The series includes two basic models: CQ2 without a built-in magnet and CQD2 with a built-in magnet. It is available in double-acting and single-acting (spring return or spring extend) configurations, with bore sizes from 12 to 25 mm and standard strokes of 10 mm and 20 mm. Mounting options include through-hole, foot, rodless-side flange, and double-clevis types. Options include internal or external threads. The cylinder has a lightweight, corrosion-resistant aluminum-alloy body and is widely used in automation equipment, packaging machinery, electronics assembly, and other applications. The model code follows this format: series-mounting type-bore × stroke-action type-option; for example, CQD2-B-40×50-D-M. Note: the example’s 40 mm bore and 50 mm stroke are outside the series’ standard range; standard bore sizes are limited to 12–25 mm.

CQ2B/CDQ2B Series Compact Cylinders

CQ2B/CDQ2B Series Compact Cylinders

The CQ2B/CDQ2B series consists of double-acting compact cylinders with flat bodies and short axial dimensions, suitable for clamping, pushing, lifting and positioning where mounting space is limited. The CDQ2B is a sensing type with a magnetic ring and can be fitted with magnetic switches. This page covers large-bore models with bore sizes of 125, 140, 160, 180 and 200 mm. The operating fluid is air, and the cylinders are double-acting. Maximum operating pressure is 1.0 MPa, minimum operating pressure is 0.05 MPa, and lubrication is not required. Standard strokes vary by bore size: 125/140 mm bores offer 10, 20, 30, 40, 50, 75, 100, 125 and 150 mm strokes; the 160 mm bore also offers 175, 200, 250 and 300 mm strokes. Non-standard strokes can be adjusted within standard-stroke cylinders. The rod end has a male thread (M22×2.5, M24×3, etc.). Through-hole mounting is also possible, but the supplied washers must be used.

CQ2K Series Non-Rotating Rod Compact Cylinder

CQ2K Series Non-Rotating Rod Compact Cylinder

The CQ2K series is a compact pneumatic cylinder with a non-rotating piston rod, based on the CQSK design. Its short axial profile requires little mounting space, while an anti-rotation mechanism at the rod end prevents workpieces from rotating with the rod during lifting, clamping, positioning and anti-rotation operations. It is commonly used for linear reciprocating motion in fixtures, assembly, material handling and automated production lines. Key selection parameters are bore size, stroke and actuation type. Different mounting supports are available to suit the mounting method, with variants including tapped holes at both ends, through-holes, double clevis and versions without a built-in magnetic ring. To select a cylinder, first determine the bore size from the required pushing or pulling force, then the stroke from the required travel. Finally, choose the actuation type and mounting support based on available space, magnetic switch detection requirements and control method.

CQ5B Series Compact Cylinders

CQ5B Series Compact Cylinders

The CQ5B Series Compact Cylinders feature a space-saving design for automation equipment with limited installation space. Bore sizes range from 12 to 25 mm, with strokes of 10 to 20 mm. Available operating modes include double-acting and single-acting (spring-retracted or spring-extended). Mounting options include through-holes, foot mounting, rodless-side flanges, and double-ring mounting. An optional built-in magnetic ring enables position detection. The cylinder body is made of aluminum alloy, and the piston rod is available with either external or internal threads. The operating pressure range is 0.1–1.0 MPa, and the ambient temperature range is −20 to 70°C. Designed with sealing rings for long service life, this series is widely used in light-duty applications such as electronics assembly, packaging machinery, and robotics.

CRA1 Series Rack-and-Pinion Rotary Actuator

CRA1 Series Rack-and-Pinion Rotary Actuator

The CRA1 Series rack-and-pinion rotary actuator is a double-acting pneumatic actuator that converts linear piston motion into rotary oscillation. It is suitable for workpiece turning, valve actuation, indexing and positioning. Standard bore sizes are 30, 50, 63, 80 and 100 mm. The maximum operating pressure is 1 MPa and the minimum is 0.1 MPa. Ambient and fluid temperatures range from 0~60℃ (no freezing), output torque is approximately 1.9~74 N·m, swing time is 0.2~5 seconds/90°, and port sizes range from Rc M5×0.8~3/8. Models can be configured by mounting, operation and shaft-end codes, bore size, swing angle and magnetic switch, for example CRA1BWU50-90-A73.

CRA1B Series Rotary Actuators

CRA1B Series Rotary Actuators

The CRA1B series consists of rotary actuators. This page provides overall dimensions and dimensions for the angle-adjustable type, covering U50, U63, U80, and U100 sizes. The tables list mounting and overall dimensions, including AU, BU, CU, +DU, EU, SU, and MU thread dimensions. Some sizes are identified as angle-adjustable types; for other dimensions, refer to the basic type. This series is suitable for pneumatic applications requiring limited-angle rotation, such as automated clamping, flipping, and indexing. The □ in model numbers represents options not detailed here; confirm the complete model number when selecting a product.

CRB1 Series Large Vane-Type Rotary Actuator

CRB1 Series Large Vane-Type Rotary Actuator

The CRB1 series large vane-type rotary actuator converts compressed air pressure into oscillating rotary motion, enabling bidirectional shaft rotation and angular positioning. It is suitable for turning, indexing, and clamping large workpieces where high torque is required. Bore sizes are 25, 32, 40, 50, 63, 80, and 100 mm, with a standard swing angle of 90°. The series includes the CRB1 without a built-in magnetic ring and the CDR1 with a built-in magnetic ring, which can be used with magnetic switches to detect swing position. Mounting options include basic, axial, rod-side flange, non-rod-side flange, rod-side trunnion, non-rod-side trunnion, and clevis types. A double-shaft configuration (W) is available. The working medium is filtered compressed air, and the actuator can be operated without lubrication or with oil-mist lubrication.

CRB2 Series Vane-Type Rotary Actuator

CRB2 Series Vane-Type Rotary Actuator

The CRB2 series vane-type rotary actuator uses compressed air to drive a vane in a reciprocating rotary motion. It features a compact design, small size, high torque, and no need for an external guide rod. It is available in a range of bore sizes, with standard rotation angles typically including 90°, 180°, and 270°. Magnetic switches can be fitted for position detection. It is widely used in automated equipment for workpiece turning, clamping, sorting, and valve operation. Various mounting options are available, including basic and flange types, to suit different operating conditions.

New CRB2 Series Rotary Actuators

New CRB2 Series Rotary Actuators

The new CRB2 series rotary actuators use compressed air to generate rotary torque, providing approximately 0~180° of oscillating motion for pneumatic automation applications such as flipping fixtures, opening and closing valves, and changing material direction. The series has two basic models: CRB2B (without a built-in magnetic ring) and CDR2B (with a built-in magnetic ring). Configurations include double shaft (W), basic (B), axial (L), rod-side flange (F), non-rod-side flange (G), rod-side trunnion (U), non-rod-side trunnion (T), and clevis (D). Bore sizes range from Φ20~Φ100, with a standard rotation angle of 180°. A protective cover and magnetic switch (Z) are available for position detection and integration with automated control systems.

CRBU2 Series Vane-Type Rotary Actuator

CRBU2 Series Vane-Type Rotary Actuator

The CRBU2 series is a vane-type rotary actuator that converts air pressure into rotary motion via an internal vane, producing oscillation through a set angle. A magnetic switch can be fitted for position detection. The bore size is Φ10, and the oscillation angle includes 180°. Shaft options include single-shaft and magnetic-switch-equipped types. It features a single vane. Suitable for rotary actuation, clamping, and other applications in automation equipment. Its compact design makes installation easy.

CRBU2W Series Vane-Type Rotary Actuators

CRBU2W Series Vane-Type Rotary Actuators

CRBU2W series vane-type rotary actuators use compressed air to drive a vane back and forth through a limited angle, enabling workpiece flipping, indexing, clamping and turning. They are available in single-vane (S) and double-vane (D) versions, with bore sizes of 10, 15, 20, 30 and 40 mm and standard rotation angles of 90°, 180° and 270°. The working medium is air (unlubricated), allowing long-term operation without lubrication. The model designation CRBU2W+bore size identifies the body size, while the S/SE suffixes distinguish the vane type. For bore sizes 20 and 30, F can be added to indicate a quick-connect fitting suitable for nylon, soft nylon and polyurethane tubing. The catalog provides all A~X external and mounting dimensions and M3~M6 threaded ports, along with a dimension table for mounting units. The compact actuators can be used directly with mounting brackets and are suitable for rotary stations where space is limited.

CS1-F Series Magnetic Switch

CS1-F Series Magnetic Switch

The CS1-F series magnetic switch provides non-contact detection of pneumatic cylinder piston position. A magnetic field actuates a reed contact to produce a switching signal. Designed for pneumatic cylinders, it fits the mounting grooves on common cylinder types and offers easy installation, fast response and high repeatability. The catalog lists it alongside magnetic switches such as CS1-U, CS1-S, CS1-G, D-A73, D-Z73, D-C73 and D-A93, making it easy to select a model based on wiring, mounting and output requirements. Refer to the actual product or ordering specifications for cable length, contact type, operating voltage, protection rating and other parameters.

CS1-G Series Magnetic Switches

CS1-G Series Magnetic Switches

The CS1-G series magnetic switch is a sensor used to detect the position of a pneumatic cylinder piston. It is typically mounted in a groove on the cylinder barrel and outputs a switching signal by sensing the magnetic ring on the piston. Available with a range of wiring and output options, these switches are suitable for position detection and control in various cylinders. Their compact design and easy installation make them widely used in automation equipment and pneumatic control systems. They typically feature an LED status indicator for easy monitoring and can be used with a PLC or relay for automatic control.

CS1-S Series Magnetic Switch

CS1-S Series Magnetic Switch

CS1-S series magnetic switches (magnetic proximity switches) detect piston position in pneumatic cylinders. The switch fits into a groove on the outside of the cylinder barrel and outputs a switching signal when the magnetic ring on the piston passes by. It can be connected directly to a PLC input or relay for end-of-stroke detection and sequence control. The series offers multiple body shapes and cable configurations, alongside models such as CS1-U, CS1-F, CS1-G, D-A73, D-Z73, D-C73, and D-A93, to suit cylinders with different bore sizes and groove designs. A common mounting thread is M5, the rated voltage is DC24V, and wiring configurations include G. When selecting a switch, confirm the cylinder groove dimensions, cable exit direction and length, contact type (2-wire/3-wire, NPN/PNP), and operating voltage.

CS1 Series Standard Cylinders

CS1 Series Standard Cylinders

CS1 series standard cylinders (medium-to-large bore type) are double-acting and suitable for general industrial pneumatic applications. An air-oil version is also available; the pneumatic version uses air as its working medium, while the air-oil version uses turbine oil. The 13 bore sizes range from Φ32 to Φ300 mm: 32, 40, 50, 63, 80, 100, 125, 140, 160, 180, 200, 250 and 300 mm, providing a range of low-to-high thrust outputs. Maximum operating pressure is 0.9 MPa, and minimum operating pressure is 0.05 MPa (0.06 MPa for the air-oil version). Piston speed is 50~500 mm/s, or 0.5~200 mm/s for the air-oil version. The operating temperature range is 0~70 ℃ (5~60 ℃ for the air-oil version); prevent moisture from freezing at low temperatures. The catalog also provides overall and mounting dimensions for each bore size (A, AA, B, C, CC, CD, CJ, D, E, F, H, I, J, K, L, N, O and N+O+90°, among others) to support product selection, calculations and installation design. These cylinders are widely used in automated applications such as fixture clamping, workpiece pushing and valve actuation.

CS1 Series Sensor Switches

CS1 Series Sensor Switches

The CS1 series sensor switches include models CS1-F, CS1-U, CS1-S, CS1-J, CS1-M and CS1-G. The catalog also lists the D-C73. These switches detect the position of cylinders or moving parts in automated equipment and output an electrical signal. Catalog specifications include switching distance, sensor switch type, operating voltage, maximum switching current, maximum vibration capacity, internal current consumption, forced-on voltage drop, indicator light, cable length and sensing voltage. The D-C73 has a green indicator light. Most cells in the technical specifications table on this page are blank; refer to the product specification sheet or subsequent pages for actual values.

CS1-U Series Magnetic Switch

CS1-U Series Magnetic Switch

The CS1-U series magnetic switch is a pneumatic accessory mounted on the outside of a cylinder barrel to detect piston position. It contains a magnetically sensitive element whose contacts actuate and output a signal when the magnetic ring on the piston enters the sensing area. The signal can be used by control circuits such as PLCs, relays or solenoid valves to detect cylinder stroke endpoints or intermediate positions for automated control. This series is typically secured in the cylinder's mounting slot using an M5 or similar mounting thread, and DC24V is a common operating voltage. Selection should take into account the cylinder bore, mounting slot type, lead wire exit and output type. The switch's operating range and response frequency should also meet the required cycle rate.

CY1B/CY3B Series Magnetically Coupled Rodless Cylinders

CY1B/CY3B Series Magnetically Coupled Rodless Cylinders

The CY1B/CY3B series comprises basic magnetically coupled rodless cylinders without a switch mounting rail. With no exposed piston rod, they save installation space and are suitable for long-stroke automation equipment where space is limited. Bore sizes are 10, 15, 20, 25, 30 and 40mm. Magnetic holding force options are high holding force H and low holding force L. Stroke is customized to requirements. Magnetic switch options include no switch, 1 switch, 2 switches or n switches. The model code consists of the series, bore size, magnetic holding force and stroke, separated by spaces. The series includes two basic types, CY1B and CY3B, with CY3B being the upgraded magnetically coupled type. Distinguish these from other rodless cylinder series, such as CY1R/CY3R, CY1S, RMH, MY1B and MY1H.

CY1L Series Magnetically Coupled Rodless Cylinder

CY1L Series Magnetically Coupled Rodless Cylinder

The CY1L series magnetically coupled rodless cylinder uses a magnetic coupling drive with no mechanical connection between the piston and the external slider. Compressed air enters the cylinder tube and moves the piston with its built-in magnetic ring, which drives the external slider in a straight line by magnetic force. The cylinder tube is fully sealed, with no protruding piston rod, making the unit compact and suitable for long-stroke applications where mounting space is limited. Bore sizes are 6、10、15、20、25、32、40mm. The cylinder is double-acting and uses air as its working medium. Maximum operating pressure is 0.7MPa and minimum pressure is 0.18MPa. Ambient and fluid temperature is -10~+60℃ (no freezing), and cleaning speed is 50~1000mm/s. Rubber cushions or hydraulic shock absorbers are available at both ends. Mounting orientation is unrestricted, and port sizes are Rc M8~0.8、1/8、1/4. Standard strokes range from 50mm to 1000mm depending on bore size, with extended strokes of 300~2000mm available; non-standard strokes can also be customized. The cylinder body has a mounting rail for magnetic switches and can be fitted with switches such as the A73. A lead wire length code is appended to the switch model number (no code -0.5m、L-3m、Z-5m). Suitable for factory automation applications such as handling, pushing, and positioning

CY1R/CY3R Series Magnetically Coupled Rodless Cylinders

CY1R/CY3R Series Magnetically Coupled Rodless Cylinders

The CY1R/CY3R series consists of magnetically coupled rodless cylinders with no mechanical connection between the piston and slider. They are suited to long-stroke automated conveying and handling applications where installation space is limited. Bore sizes range from Φ10 to Φ40 mm, with a choice of high holding force H or low holding force L magnets. The stroke can be specified as required, such as 250 mm. Magnetic switches such as the M9BW are available, with a choice of 1 switch (S), 2 switches, or no switches. The basic type has no switch rail; the switch rail incorporates a magnet. The compact design is easy to maintain.

CY1R Series Rodless Cylinders

CY1R Series Rodless Cylinders

The CY1R series consists of magnetically coupled rodless cylinders with air-operated, double-acting operation. The standard model is available in four bore sizes: 6, 10, 50, and 63 mm. Maximum operating pressure is 0.7 MPa, minimum operating pressure is 0.18 MPa, piston speed is 50~500 mm/s, and ambient and fluid temperatures are -10~+60℃ (no freezing). The cylinder has a standard shaft mounting arrangement at both ends. The stroke can be selected to suit the required travel distance, with a stroke length tolerance range of 0~250 mm. The series is suitable for linear reciprocating drives, workpiece transfer, and positioning mechanisms in automated equipment where installation space is limited. Magnetic switches can be fitted to detect end-of-stroke positions. When selecting a cylinder, first determine the bore size based on the load and required thrust, then select the stroke based on the travel distance, and verify that the operating pressure and speed are within the specified ranges.

CY1RG Series Rodless Cylinders

CY1RG Series Rodless Cylinders

The CY1RG series consists of magnetically coupled rodless cylinders that transmit force between the piston and external slider through magnetic coupling. With no mechanical piston rod, they offer a short overall length and compact footprint, making them suitable for long-stroke linear motion and installations where space is limited. Three bore sizes are available: 10, 50, and 63mm. The CY1RG10 has a stroke range of 50~500mm, an M5×0.8 port thread, an M3×0.5 mounting thread, and an M4×0.7×6 protruding thread. The CY1RG50 and CY1RG63 have a stroke range of 50~2000mm, an Rc1/4 port thread, an M8×1.25 mounting thread, and an M10×1.5×15 protruding thread. The catalog provides complete overall and mounting dimensions, including B, C, CB, CR, D, F, G, GP, GW, H, HA, HC, HP, HR, HS, HT, K, L, LD, M, MM, N, P, PW, Q, QW, T, W, WS, X, Y, Z, HB, TC, and WP, for direct use in mechanical design and installation planning. Magnetic switches can also be used for position detection.

CY1S Series Magnetically Coupled Rodless Cylinders

CY1S Series Magnetically Coupled Rodless Cylinders

The CY1S series consists of magnetically coupled rodless cylinders that use magnetic coupling to transmit the piston’s linear motion to an external slider without a piston rod. Their compact design, long stroke and small footprint make them suitable for automated equipment with limited space or requiring long-stroke linear motion. The standard specifications table on this page lists bore diameters of 6, 10, 15, 20, 25, 32, 40, 50 and 63 mm. The dimensional table provides mounting and overall dimensions for CY1S6, CY1S10, CY1S15, CY1S20, CY1S25, CY1S32 and CY1S40. Stroke ranges vary by bore size: up to 300 mm for CY1S6/CY1S10, up to 750 mm for CY1S15 and up to 1500 mm for CY1S20~CY1S40. The performance table for operating pressure, speed, temperature and other parameters was not filled in in the source.

CY1S Series Magnetically Coupled Rodless Cylinder

CY1S Series Magnetically Coupled Rodless Cylinder

The CY1S series magnetically coupled rodless cylinder transmits force through magnetic coupling without an exposed piston rod, making it suitable for long strokes and confined spaces. The basic model has no switch rail and is available in bore sizes Φ10, Φ15, Φ20, Φ25, Φ30, and Φ40 mm, with stroke specified as required. Magnetic holding force options are high holding force H and low holding force L. It can be configured with no magnetic switches, or with 1, 2, or n magnetic switches; the switch rail has a built-in magnet. Compact and easy to install, it is commonly used in automated handling, pushing, pulling, and positioning mechanisms.

CY3B/CY3R Series Magnetically Coupled Rodless Cylinders

CY3B/CY3R Series Magnetically Coupled Rodless Cylinders

The CY3B/CY3R series consists of magnetically coupled rodless cylinders that use magnetic coupling between the piston and slider. They are suitable for long-stroke linear reciprocating applications where space is limited. The catalog lists five bore sizes: 15, 20, 25, 32, and 40 mm. The operating medium is air (non-lubricated), with a maximum operating pressure of 0.7 MPa, a minimum operating pressure of approximately 0.12~0.16 MPa, and an ambient temperature range of -10~+60℃ (without freezing). CY3R is a side piping type, with a centralized piping type (CY3RG) also available. The page provides external and mounting dimensions, including A, B, C, D, H, HP, and HT, for the CY3R15~CY3R40 and CY3RG series to facilitate equipment layout and installation design.

CY3B/CY3R Series Magnetically Coupled Rodless Cylinders

CY3B/CY3R Series Magnetically Coupled Rodless Cylinders

The CY3B/CY3R series features magnetically coupled rodless cylinders. Magnetic coupling provides rodless operation in a compact design that saves installation space. Suitable for applications such as automated production lines, material handling, and assembly, the series is available in a range of bore sizes and can be fitted with magnetic switches for position detection. It offers smooth operation, reliable sealing, and a long service life, making it a popular actuator for industrial automation.

CY3B Series Magnetically Coupled Rodless Cylinder

CY3B Series Magnetically Coupled Rodless Cylinder

The CY3B series magnetically coupled rodless cylinder transmits motion through magnetic coupling, with no mechanical linkage between the piston and external slider. The full cylinder length is the effective mounting length, making the compact, space-saving design especially suitable for long-stroke applications with limited installation space. Seven bore sizes are available: Φ6, Φ10, Φ15, Φ20, Φ25, Φ32 and Φ40mm. Port options are threaded (blank) and unthreaded (B). The stroke is specified as required; the catalog example is 300mm. The basic model has no switch mounting rail, but magnetic switches can be mounted on the cylinder body to detect piston position. Lightweight, smooth-running and easy to maintain, this series is suitable for factory automation applications such as handling, pushing and positioning.

CY3L Series Magnetic Coupling Rodless Cylinder

CY3L Series Magnetic Coupling Rodless Cylinder

The CY3L Series Magnetic Coupling Rodless Cylinder uses magnetic coupling to drive a rodless piston. It is suitable for linear motion, material handling, clamping, and other applications on automated production lines. Its compact design and rodless construction save installation space, while offering reliable sealing, a long service life, and easy maintenance. Bore sizes typically range from small to medium, and strokes can be customized to meet specific requirements. These cylinders are widely used in automation equipment across the electronics, packaging, automotive, and other industries.

CY3R Series Magnetically Coupled Rodless Cylinder

CY3R Series Magnetically Coupled Rodless Cylinder

The CY3R series is a range of magnetically coupled rodless cylinders. A magnetic ring on the piston couples with a magnetic ring on the external slider, transferring the piston's linear motion to the slider without contact. The cylinder tube requires no opening, eliminating leakage and providing a compact design with a small installation footprint. These cylinders are suitable for long-stroke pushing, pulling, positioning and conveying applications in clean and dusty environments. Bore sizes are Φ6, Φ10, Φ15, Φ20, Φ25, Φ32 and Φ40mm. The stroke is specified in millimeters (300mm in the catalog example). Structural variants include the basic type (without switch rail), flange type (upgraded magnet type) and magnet-free type (upgraded magnet type). Port thread options are threaded (blank) and unthreaded (B). To select a model, combine the codes in the order “series number-bore size-port thread-stroke,” for example, CY3R-25-300. Related variants include CY3S and CY3B, which can be used with magnetic switches and guide mechanisms.

CY3S Series Magnetically Coupled Rodless Cylinder

CY3S Series Magnetically Coupled Rodless Cylinder

The CY3S series magnetically coupled rodless cylinder uses magnetic force to transmit motion, with no mechanical connection between the piston and the external slider. It provides long-stroke reciprocating motion without a piston rod, offering a compact design that requires minimal installation space. Bore sizes include Φ6, Φ10, Φ15, Φ20, Φ25, Φ32, and Φ40. Port thread options are blank for threaded and B for unthreaded. The stroke is selected to suit the application (catalog example: 300mm). Configuration options include a switch mounting rail (no symbol: without switch; O: with switch) and the basic D type. It is widely used for linear actuation in automation equipment, packaging, material handling, and other applications.

CY3S Series Magnetically Coupled Rodless Cylinders

CY3S Series Magnetically Coupled Rodless Cylinders

The CY3S series features magnetically coupled rodless cylinders. Magnetic coupling drives the carriage without an extending piston rod, creating a compact design suited to reciprocating linear motion in clean environments and automated equipment. The model code CY3S-12D1M9B, for example, includes segments for the series, bore size, cushioning type, stroke, and sensors. Refer to the product catalog for specific specifications.

D-A73 Series Magnetic Switch

D-A73 Series Magnetic Switch

The D-A73 series magnetic switch is a position sensor mounted in a groove on a pneumatic cylinder barrel. It detects the permanent magnetic ring on the cylinder piston to determine the piston's position and sends a position signal to a PLC or solenoid valve control circuit. The appropriate snap-in mounting style is selected according to the cylinder's outside diameter and groove specifications. The switch clips directly into the barrel groove for easy installation and adjustment without an additional bracket. It has a two-wire connection, typically operates at DC24V, and features an indicator light for easy on-site confirmation of the switching status. Alongside similar magnetic switches such as the D-Z73, D-C73, and D-A93 series, it meets requirements for different sensing sensitivities, wiring configurations, and lead lengths. Common applications include cylinder end-of-stroke detection, fixture clamping confirmation, and position feedback on automated production lines. When selecting a switch, consider cylinder groove compatibility, operating voltage, wiring configuration (two-wire/three-wire), lead length, and protection rating.

EX0920 Series Explosion-Proof Coils

EX0920 Series Explosion-Proof Coils

The EX0920 series comprises coil assemblies for various explosion-proof solenoid valves, available in three models: EX0920, EX0920(A), and EX0920(B). The coils have an insulation (explosion-proof) rating of Exmb11T4 and explosion-proof certificate number CNEX17.3311X. All models use cable leads and are suitable for a range of explosion-proof solenoid valve applications. Standard voltages are AC220V and DC24V, with two power versions rated AC6VA/DC4W and AC5.8VA/DC3.8W, respectively. The coils have a cylindrical body with a lead cable; overall dimensions are shown in the diagram in millimeters. Select the A/B version to match the solenoid valve's required voltage, power, and explosion-proof rating. The coils are intended for installation on flameproof or encapsulated explosion-proof solenoid valves.

EX1620 Series Pulse Jet Controller

EX1620 Series Pulse Jet Controller

The EX1620 series pulse jet controller is the primary control device for the cleaning system of a pulse-jet baghouse dust collector. Its output signals directly control the solenoid pulse valves, using compressed air to pulse-clean the filter bags. This keeps the collector's resistance and pressure within the set range, ensuring stable system pressure and flow. The controller uses intelligent microprocessor control to adjust pulse intervals and pulse widths to suit operating conditions, sequentially cycling through the pulse valves. It consists primarily of a microprocessor, interference suppression circuit, digital display, keypad, electronic switches, and regulated power supply, providing intelligent, stable, and reliable operation. It accommodates a wide range of power supply conditions, operating normally despite large fluctuations within AC100~240V, and features multistage power conditioning. Standard voltage options are AC220V and DC24V. Its general-purpose industrial design allows installation in a control room or directly on the dust collector.

F1/F2/F3 Series Integrated Wiring Valve Manifolds

F1/F2/F3 Series Integrated Wiring Valve Manifolds

F1/F2/F3 series integrated wiring valve manifolds (also known as valve islands or solenoid valve manifolds) allow multiple solenoid valves to be mounted on a common base with centralized piping and wiring. This significantly reduces the number of tubes and wiring harnesses, saves installation space, and simplifies maintenance. Products are supplied by number of positions (stations), and overall length L varies linearly with the number of positions: the F1 model is 115mm long with 4 positions, increases by 16mm for each additional position, and reaches 243mm at the maximum of 12 positions. F2 model length is calculated as L=number of positions×K+80, where K is the solenoid valve pitch (generally the standard manifold pitch +1mm); it can be expanded to 24 positions. The F3 model is custom-developed, and manifold dimensions vary with the solenoid valve used. For example, when fitted with 4V210 solenoid valves, it is 124mm long with 4 positions, increases by 23mm for each additional position, and is 354mm long with 14 positions. A 10-position integrated wiring manifold for the SY5120 series is also available. When selecting a product, confirm the solenoid valve model, number of positions, port size, and mounting hole locations.

F2 Series Valve Manifold

F2 Series Valve Manifold

The F2 series valve manifold (solenoid valve manifold block) mounts multiple solenoid valves together with a common air supply and centralized wiring, enabling integrated piping in pneumatic control systems. The F2 is a custom-developed manifold with an overall length calculated as L = nK + 80, where n is the number of stations and K is the solenoid valve spacing (typically the standard manifold spacing plus 1mm). Common configurations have 4~14 stations and can be customized to suit the number of valves and non-standard spacing, so dimensions vary depending on the solenoid valves used. The same family also includes the F1 fixed-spacing valve manifold (for the SY5120 centralized-wiring valve manifold, 4~12 stations, overall length 115~243mm, pitch 16mm) and the F3 valve manifold (compatible with 4V210 solenoid valves, 4~14 stations, overall length 124~354mm, pitch 23mm). Key specifications include the number of stations, solenoid valve spacing K, overall length L, compatible valve type, air supply method, and wiring method.

F3 Series Valve Manifold

F3 Series Valve Manifold

The F3 series is a custom-developed pneumatic solenoid valve manifold designed to mount multiple solenoid valves together, reducing piping and wiring. The verified dimensions for use with 4V210 solenoid valves are as follows: for 4~14 valve stations, the corresponding lengths are L=124, 147, 170, 193, 216, 239, 262, 285, 308, 331, and 354 mm, increasing by approximately 23 mm per additional station. As manifold dimensions vary with the solenoid valve, confirm the valve model, number of stations, ports, and mounting method when selecting a product. F3 is a custom product and cannot be ordered as a standard stock item.

HTK Series

HTK Series

The HTK Series comprises standard double-acting cylinders with aluminum alloy bodies treated with an anodized coating for wear and corrosion resistance. Oil-free bearings and wear-resistant sealing rings provide a long service life. Multiple port positions are available. The cushioned version reduces impact, while the version with a magnetic ring can be used with reed switches. Available bore diameters are 40, 50, and 63 mm, with strokes from 50 to 150 mm in 25 mm increments. Operating pressure: 0.5–9.9 kgf/cm². Speed range: 50–500 mm/s. Cushioning: adjustable cushioning at the end positions. Optional configurations include adjustable air intake (A) and a built-in magnet (M).

HL Series Pneumatic Scissors

HL Series Pneumatic Scissors

HL Series pneumatic scissors bodies and compatible blades are suitable for electronics assembly, plastics, automated cutting, winding machines, and custom automation applications. Pneumatically powered, they deliver efficient, precise cutting. The series includes three body models—HLF-3A, HLY-3A, and HLS-3A—to meet a range of application needs. Their compact design makes installation easy and allows them to fit a variety of automated equipment.

HJC Series Compact Cylinders

HJC Series Compact Cylinders

The HJC series comprises compact cylinders, model HJC-350, with a fixed bore and a range of strokes from 10 to 125 mm. The initial force is a constant 3,600 N, while the end force ranges from 5,200 to 5,900 N. Cylinder length increases with stroke, making these cylinders suitable for applications with limited space that require high thrust. This reliable series is widely used in automation equipment, clamping devices, and more.

Pneumatic Expanding Locating Pin (Double-Acting)

Pneumatic Expanding Locating Pin (Double-Acting)

This series of pneumatic expanding locating pins features a double-acting design for locating workpieces. Two functional types are available: diamond pins for locating in a single direction and datum pins for datum positioning. Bore size codes range from 080 to 150, corresponding to straight-hole diameters of φ7.6–φ16.2, to meet a variety of locating requirements. Three seating heights are available: H15, H20, and H25, for different installation heights. Pneumatically actuated, the pins expand to clamp the workpiece, enabling fast locating and release.

WCE High-Capacity Pneumatic Lever Cylinder

WCE High-Capacity Pneumatic Lever Cylinder

The WCE Series High-Capacity Pneumatic Lever Cylinder is designed for clamping workpieces and features a spring-return, single-acting mechanism. Five cylinder force ratings are available: 0.6 kN, 1.0 kN, 1.6 kN, 2.5 kN, and 4.0 kN (at an air pressure of 0.5 MPa). The total stroke is 19.5–33 mm, including a 4 mm clamping stroke. Mounting options include a manifold-mounted type (for installing a speed control valve or an R-threaded plug) and an external-piping type (Rc thread). The clamp arm can be oriented to the left, center, or right. Position confirmation options include a standard type without a sensor, a double-rod type for a probe, and a manifold-mounted type with an air sensor. The maximum operating pressure is 0.5 MPa, and the operating temperature range is 0–70°C. It is widely used for workpiece positioning and clamping on automated production lines.

HFZ Compact Pneumatic Support Cylinder

HFZ Compact Pneumatic Support Cylinder

The HFZ series compact pneumatic support cylinders are air-powered and deliver strong support in a compact design, effectively preventing vibration when machining die-cast or thin-sheet workpieces. They are easy to integrate with pneumatic clamps and feature exposed air piping for convenient installation and maintenance. A dust cover physically shields the cylinder from cutting fluid and chips, improving durability. Bore diameters of 25 mm and 32 mm are available, with support forces of 0.55 kN and 1.5 kN, respectively, at a working pressure of 1 MPa. The piston stroke is 10 mm. Available in standard (P) and high (Q) precision grades to suit different applications. Operating temperature range: 0–70°C. Maximum working pressure: 1 MPa.

CLU-F Series Pneumatic Parallel Grippers

CLU-F Series Pneumatic Parallel Grippers

The CLU-F series is a range of pneumatic parallel grippers designed for gripping, handling, assembly, and other applications in industrial automation. It is available in six sizes (CLU02-F to CLU25-F), covering a range of gripping forces and strokes. The compact design comes with detailed mounting dimensions, including overall length and width, mounting-hole spacing, and port size, making integration into automation systems straightforward. The gripper body is made of aluminum alloy and features a corrosion-resistant surface treatment, making it suitable for a variety of working environments. The table lists detailed dimensions for each model, including A (overall length), B (width), and φG (gripper diameter), helping users select a model to suit their space requirements. The series can be used with a standard retaining ring (STW-6). Port sizes range from G1/8 to G3/8 to accommodate different air supply pressures.

LJ Series Linear Clamping Module

LJ Series Linear Clamping Module

The LJ series features plate-mounted clamping modules with G-thread plugs, designed for clamping and positioning applications in pneumatic systems. It is available in two base models, LJ0902-□ and LJ1052-□, with key specifications including total stroke, clamping stroke, and stroke margin. Dimensions include diameter, length, and mounting-hole spacing to accommodate different space and load requirements. The compact design is easy to install, and the air supply port uses a standard thread for compatibility with a variety of pneumatic circuits.

VRG Series

VRG Series

The VRG Series comprises compact cylinders/actuators available in six bore/size models: CMD02, CMD04, CMD06, CMD10, CMD20, and CMD40, with strokes of 5 mm, 10 mm, 5 mm, 10 mm, 20 mm, and 10 mm, respectively. The products come in two configurations, G-type and T-type, making them suitable for automation equipment with limited space. Mounting dimensions include various parameters such as A, B, C, and D. Fitted with O-rings and grease nipples, they offer flexible installation. The short thread pitch allows for tightening torques of 5–25 N·m. This series provides high-precision linear motion and is widely used in pneumatic actuation systems.