Pneumatic Components — Page 25

PST-G Copper Fitting Silencer

PST-G Copper Fitting Silencer

The PST-G copper fitting silencer features a copper fitting and a metal silencing element to reduce noise and disperse airflow at pneumatic system exhaust ports. By redirecting the exhaust and reducing its velocity, it effectively lowers the noise generated by cylinders, solenoid valves and other components during exhaust. Models are distinguished by port thread size, with common sizes including G1/8, G1/4, G3/8, G1/2, G3/4 and G1. Dimensions include fitting outer diameter ΦD (16~48mm), threaded section length L1 (7~17mm), overall length L2 (32~134mm) and feature dimension B (2.2~2.5mm). The copper fitting is corrosion- and pressure-resistant and screws directly into the exhaust port without an additional seal. It is suitable for noise reduction at individual or centralized exhaust ports on cylinders, solenoid valves, pneumatic motors and other components. The working medium is compressed air.

PSE Plastic Silencer

PSE Plastic Silencer

PSE series plastic silencers reduce noise and keep dust out of pneumatic component exhaust ports. They feature an engineering plastic body and are available with G1/8, G1/4, G3/8, G1/2, G3/4, and G1 threaded connections. Models range from PSE-01 to PSE-10 according to connection size, with an outside diameter ΦD of 13~48 mm and an overall length L2 of 30~134 mm. L1 is the thread/mounting section length, and a B dimension is specified for some sizes. The silencers screw directly into the exhaust ports of solenoid valves, cylinders, and other components to reduce exhaust noise and prevent dust ingress. They are suitable for automated equipment, pneumatic control systems, and similar applications.

AN-G Series Plastic Silencers

AN-G Series Plastic Silencers

AN-G series plastic silencers reduce noise and manage exhaust at the outlet of pneumatic circuits. They feature a plastic body and are available with M5, G1/8, G1/4, G3/8, G1/2, G3/4, and G1 connection threads. The catalog specifies MODEL, G, ΦD, L1, L2, and B for selection, with ΦD approximately 8.5~45 mm, L1 approximately 5~17 mm, and L2 approximately 18~100 mm. They are suitable for exhaust ports on solenoid valves, pneumatic cylinders, and pneumatic valve manifolds. Select the appropriate thread size and external dimensions for installation. The source may list multiple specifications for the same model, so confirm against the drawings before purchasing.

FD Series Antifreeze Tubing

FD Series Antifreeze Tubing

FD series antifreeze tubing is made of polyurethane (PU) and is suitable for fluids such as air and water, with an ambient and fluid temperature range of -40℃~+60℃. It offers excellent flexibility, a small bending radius, vibration resistance, light weight, wide operating temperature and pressure ranges, good chemical resistance, low pressure loss, consistent hardness, and a long service life. It is non-toxic and odorless, can be customized in a choice of colors, and complies with ROHS environmental requirements. Common applications include pneumatic tool assemblies on industrial robots, pressurized lines for pneumatic tools, conveying water and other fluids, vacuum tubing, protective sleeves for metal and electronic products, and decorative items. The order code consists of FD, the outer diameter code, inner diameter code, length code, and color code. Available colors are blue, black, transparent, and red.

Anti-static pneumatic tubing

Anti-static pneumatic tubing

This anti-static pneumatic tubing is made from imported German Bayer PU polyurethane with an anti-static additive. It has a hardness of 95A, an operating temperature range of -25℃ to +80℃, and a surface resistance of approximately 10⁸–10⁹ Ω, providing continuous anti-static protection. Static electricity generated by friction during equipment operation and use can be dissipated as air flows through the tubing, helping protect equipment and products while preventing static from attracting dust or damaging electronic components. The tubing is flexible, lightweight, vibration-resistant and has a small bend radius. It offers good chemical resistance, low pressure loss, consistent hardness and a long service life. Colors can be customized for easy line identification. It is suitable for conveying compressed air and coating solvents in the automotive, electronics and chemical industries. It can also be used for industrial robot pneumatic tool lines, pressurized transfer lines, vacuum tubing and protective sheathing for metal and electronic products.

PUB Series Braided Reinforced Hose with Fittings

PUB Series Braided Reinforced Hose with Fittings

The PUB series braided reinforced hose with fittings is designed for pneumatic and fluid transfer applications. Fitted at both ends, it can convey air, water and other fluids. The braided reinforcement improves pressure resistance and burst strength, while the fittings allow quick connection to piping. Available in metric sizes, it covers inner diameters of 5.0~13.0mm and outer diameters of 8.0~18.0mm. The standard supply length is 100 meters (model suffix -100M). Select the appropriate product number based on the inner diameter, outer diameter and fluid medium. The hose is widely used in factory automation pneumatic circuits and general fluid lines.

JSFB Series Fiber-Reinforced Explosion-Proof Oil Hose

JSFB Series Fiber-Reinforced Explosion-Proof Oil Hose

The JSFB series fiber-reinforced explosion-proof oil hose, also known as a fiber-reinforced antistatic air hose, is a multilayer hose with high-strength fiber yarn braided between the inner and outer rubber layers. This reinforcement provides pressure and burst resistance, allowing the hose to carry air, water and other fluids. Models use the code “JSFB + two-digit outer diameter + two-digit inner diameter ×10 - roll length.” For example, JSFB1065-100M indicates an outer diameter of 10.0 mm, an inner diameter of 6.5 mm and a standard roll length of 100 m. Commonly stocked sizes cover outer diameters of 8.0/10.0/12.0 mm and inner diameters of 5.0/6.5/8.0 mm, supplied in complete 100 m rolls. The hose combines oil resistance, pressure resistance and explosion-proof safety features, making it suitable for pneumatic tools, painting, chemical processing and industrial piping where explosion-proof or antistatic properties are required. Versions with fittings (PUB series) and antistatic models are also available in the same range.

DJT Series Braided Reinforced Tubing

DJT Series Braided Reinforced Tubing

DJT series braided reinforced tubing is a flexible protective sleeve with a reinforced braided outer layer, designed primarily to protect pneumatic lines, hydraulic lines and cables. It is abrasion-resistant, compression-resistant, explosion-proof and antistatic. Its flexibility and small bend radius make it suitable for routing in confined spaces in factory automation equipment. Models are designated DJT-size×inner diameter and are available in a range of specifications, with inner diameters from 4mm to 8mm and various lengths to suit equipment travel and installation space. This standard industrial accessory protects air, water and other fluid lines.

SJPS Double-Braided PU Hose

SJPS Double-Braided PU Hose

The SJPS double-braided PU hose is designed for spraying and solvent applications. It features a polyurethane (PU) inner tube reinforced with a double braid of polyester yarn, combining PU flexibility with the braid's resistance to pressure, abrasion and bursting. It is primarily used with spraying equipment, solvent transfer lines and pneumatic systems subject to high pulsating pressures. The reinforcement helps limit hose expansion and extend service life. The catalog ordering code for this series has five parts: model (SJPS), braid type (B), outer diameter, inner diameter and length (m). For example, SJPS-B-08-50-100m specifies an 8mm outer diameter, a 5.0mm inner diameter and 100 meters per roll. Common outer diameters are 8, 12 and 16mm, with rolls typically available in 50m and 100m lengths. Select the inner and outer diameters to suit the working pressure, burst pressure, medium (solvent/paint/compressed air) and hose fitting size. Working and burst pressures decrease as the outer diameter increases; refer to the applicable polyurethane tubing and polyester air hose specification tables for exact values.

PE Series High-Pressure Burst-Resistant Spray (Solvent) Hose

PE Series High-Pressure Burst-Resistant Spray (Solvent) Hose

The PE series high-pressure burst-resistant spray (solvent) hose is a dedicated fluid transfer hose for TWSNS pneumatic systems. It features a PE (polyethylene) outer coating and a 2C inner coating, and is available in two main configurations: high-pressure burst-resistant spray (solvent) hose and twin-line braided PU hose. It is suitable for conveying solvents, paint and compressed air in spray equipment. Products are selected using the ordering code format “model + oil hose/braided hose + outer diameter + inner diameter + length.” A common specification is outer diameter 08 (8mm) and inner diameter 5.0 (5mm), supplied in standard 100m rolls. The hose is flexible, pressure-resistant and resistant to solvent corrosion. The braided layer improves burst pressure resistance and dimensional stability, making it suitable for long hose runs on automated spray lines. The catalog lists both working and burst pressures to help verify system pressure margins during selection. Colors and packaging can be specified as needed.

PE Series Polyethylene Oil Tubing

PE Series Polyethylene Oil Tubing

The PE series polyethylene oil tubing from SNS Automation (Ningye) Group is designed for high-pressure, burst-resistant spraying and solvent applications. Its two-layer composite construction combines a PE (polyethylene) outer coating with a 2C inner coating to withstand spraying solvents and high-pressure conditions. It is suitable for pneumatic piping systems used in spray painting, coating and solvent transfer. Products are selected using the order code format “model-oil tubing-outer diameter-inner diameter-length”. The standard outer diameter is 08, paired with an inner diameter of 5.0, and the standard roll length is 100m, with other lengths such as 50m also available. Confirm both the working pressure and burst pressure ratings when selecting tubing to ensure an adequate safety margin in high-pressure spraying environments. The tubing is flexible and chemically resistant, with a smooth inner surface that minimizes flow resistance. It is supplied in full rolls and can be cut to length, making it suitable for automated spraying lines, coating equipment and solvent transfer circuits.

FJLD Series Antistatic Oil Hose

FJLD Series Antistatic Oil Hose

The FJLD series antistatic oil hose (antistatic Teflon hose) has a two-layer composite construction, with a polytetrafluoroethylene (Teflon/PTFE) inner layer and a polyethylene outer layer. The Teflon inner layer resists corrosion, acids, alkalis, high temperatures and static electricity. It also provides strong electrical insulation, has a smooth inner surface and does not adhere to chemical solvents. The hose is suitable for spraying, dispensing, chemical solvent transfer and automated pneumatic or fluid lines where static sensitivity is a concern. The model number consists of the series code FJLD, construction code (such as 2C), outer diameter, inner diameter and fixed length (such as a 100m roll). Select fittings to match the outer and inner diameters, and cut the hose to the required length or order a full roll. Working pressure varies with size and temperature. Use at room temperature; refer to the product label or manufacturer for confirmed values.

FJLD Series Antistatic Spray Hose

FJLD Series Antistatic Spray Hose

The FJLD series is an antistatic spray hose with a polytetrafluoroethylene (PTFE, commonly known as Teflon) inner layer and a polyethylene outer layer. It offers resistance to corrosion, acids, alkalis and high temperatures, as well as antistatic properties and excellent electrical insulation. Its smooth inner wall resists chemical solvent adhesion, making it suitable for conveying and spraying coatings, solvents and various chemical solutions. Sizes are specified by outer and inner diameter pairs (the catalog example is outer diameter 08 and inner diameter 5.0). The standard supply length is 100m per roll. Models can be selected using a combined outer diameter, inner diameter and length code.

Nylon Tubing

Nylon Tubing

This nylon tubing series is made from a polyamide 12 and polyurethane composite. The inner and outer walls are specially treated for a smooth, powder-repellent surface that resists wear and aging. The tubing can be used continuously at -40~+80℃, with an approximate working pressure of 12kgf/cm² and burst pressure of 35kg at room temperature. The catalog lists 10 sizes with outer diameters of 4~12mm and wall thicknesses of 0.75~1.5mm. Working pressures range from 18~36kgf/cm² and burst pressures from 40~120kgf/cm²; larger diameters have lower pressure ratings, while smaller diameters have higher ratings. The tubing is naturally white and packaged in transparent plastic film. The 12/10mm outer diameter sizes are supplied in 100-meter rolls, while the 8/6/5/4mm sizes are available in 100-meter or 120-meter rolls. Applications include powder transport for electrostatic coating, conveyance of mildly acidic chemicals, and industrial water transport. Non-standard sizes are available on request.

Electrostatic Powder Coating Hose (Nylon Tubing)

Electrostatic Powder Coating Hose (Nylon Tubing)

Hose and nylon tubing for electrostatic powder coating, used to convey coating powder, weakly acidic chemical liquids, and industrial water. The hose is made from imported high-elasticity polyolefin rubber and is flexible, lightweight, cold-resistant, and resistant to aging. Its inner and outer surfaces are abrasive-treated for wear resistance and to prevent powder buildup. Two black conductive plastic tubes embedded in the hose wall dissipate static electricity generated during powder transport, ensuring normal equipment operation. The nylon tubing is made from polyamide 12 and polyurethane and operates at -40~+80℃. Common sizes have an outer diameter of 4~12mm and a wall thickness of 0.75~1.5mm. Working pressure is 18~36 and burst pressure is 40~120 (values as given in the original). Standard package lengths are 100m or 100/120m. The tubing is natural white and packaged in transparent plastic film. Non-standard sizes can be custom-made.

Flame-Retardant Pneumatic Tubing (Spark-Resistant Tubing)

Flame-Retardant Pneumatic Tubing (Spark-Resistant Tubing)

Flame-retardant pneumatic tubing (spark-resistant tubing) has a two-layer construction with a highly elastic TPU inner layer and a thermoplastic rubber outer layer. It combines flexibility, pressure resistance, flex resistance and flame retardancy, making it suitable for spark-generating applications or those requiring spark protection, including electrical discharge machines, cutting machines, laser cutting, robotic welding and gas transfer. The inner layer protects the air line, while the outer layer resists aging and enhances flame retardancy. Hardness is approximately 95A, operating temperature is -25~+80℃, thermoplastic rubber service temperature is 0~120℃, working pressure is 8KG, flame-retardant rating is Class 1, and environmental rating is V0. Confirm specifications such as outer diameter, inner diameter and length when selecting a product. Non-standard sizes can be customized on request.

XDH/XCL Series Plastic Air Blow Guns

XDH/XCL Series Plastic Air Blow Guns

The XDH/XCL series air blow guns feature plastic bodies and an ergonomic design for a comfortable grip, easy operation and economical performance. The barrel has a highly corrosion-resistant protective sleeve that helps prevent metal corrosion and scratches to workpieces. The barrel itself is made of hard anodized aluminum tubing for strength and durability. The working medium is filtered compressed air, with a working temperature of -10~50℃ and a working pressure of 0~10.0 kgf/cm². The body is made of plastic. Standard models include XDH-1 and XCH-1, with options for A and L dimensions, connection, material and accessories. Custom barrel lengths are available. Suitable for compressed-air applications such as removing dust and debris from equipment and drying. Do not point the gun at anyone's eyes or operate it in high-pressure environments.

CUJ Series Compact Free-Mount Cylinders

CUJ Series Compact Free-Mount Cylinders

The CUJ series compact free-mount cylinder is a compact pneumatic actuator suitable for installation in multiple orientations and confined spaces in automated equipment for clamping, positioning, material handling, and other applications. Models are selected by combining bore size, stroke, mounting style, and suffix codes. The catalog lists CUJU-B-12-30-D as an example, with a 12 mm bore and a 30 mm stroke. When selecting a complete model, consider the load, mounting orientation, operating pressure, and sensor accessory requirements.

MXS Series Pneumatic Slide

MXS Series Pneumatic Slide

The MXS Series pneumatic slide is a compact pneumatic actuator that integrates a double-acting cylinder with a linear guide. It is designed for applications requiring short strokes, high guide accuracy, and space-saving installation. The catalog lists a basic MXS12 bore and 50 mm stroke configuration, with model codes selected according to the stroke adjuster (AS front end, AT rear end, B belt end) and available options. The slide offers high rigidity and easy installation, making it suitable for automated fixtures, inspection, feeding, and other applications.

HLH Series Side-Rail Precision Slide Table Cylinder

HLH Series Side-Rail Precision Slide Table Cylinder

The HLH series side-rail precision slide table cylinder is a pneumatic actuator that integrates a cylinder with a side-rail guide mechanism. It is suitable for automated applications requiring precise linear sliding, positioning, and short-stroke reciprocating motion. Its compact design and side-rail guide can accommodate moderate lateral loads, providing smooth movement and high repeat positioning accuracy. Common applications include fixtures, material handling, inspection, and small assembly equipment. Models are designated HLH-[bore]-[stroke]-[magnet]. For example, HLH 20 × 30 S indicates a 20 mm bore, a 30 mm stroke, and an included magnet. Available bore sizes include 6, 16, and 20 mm, and available strokes include 8 and 30 mm. A blank magnet code indicates no magnet, while S indicates an included magnet.

BDF Series Positioning Cylinder

BDF Series Positioning Cylinder

The BDF series is a magnetic-type positioning cylinder; the same series coding also includes the standard BDU type. The model number consists of five parts: series code, bore, stroke, piston rod height, and magnet code. For example, BDF-40-30-L25-S indicates a 40mm bore, 30mm stroke, L25 piston rod height, and a magnet. A blank magnet code means no magnet, while S indicates a magnet. The series is suitable for automated fixtures, tooling, and small actuators requiring position holding or positioning. Select the piston rod height and magnet option according to the bore, stroke, and available installation space.

MK Series Rotary Clamp Cylinder

MK Series Rotary Clamp Cylinder

The MK series rotary clamp cylinder is a pneumatic actuator that converts linear piston motion into rotary and clamping action. It is commonly used for rapid workpiece clamping and swing-away clearance at loading and unloading stations on machine tools, fixtures, and automated assembly lines. The ordering code is divided into “series—mounting bracket—bore—stroke—rotation direction—cylinder options”: the series is always MK; mounting options are standard (no symbol) or rodless-side flange type G; bore sizes range from Φ12~Φ63; the stroke is selected according to the bore; rotation is either right R or left L, allowing symmetrical layouts for mirrored stations. Cylinder and accessory options include standard female thread (no symbol), with cap N, with cap for specified bore ranges RC, NPT thread TN, and G thread TF. The cylinder is also available with a magnet S or without a magnet (blank); a magnetic switch can be used with the magnet-equipped version to detect the clamped position. The cylinder body is typically made of anodized aluminum alloy, the piston rod is hard chrome-plated, and the seals are wear-resistant for long-term operation in medium-frequency clamping applications. When selecting a model, confirm the bore, stroke, rotation direction, and mounting bracket type, and note the differences in the RC cap option between the Φ12~Φ25 and Φ32~Φ63 size ranges.

SRC Series Swing Clamp Cylinder

SRC Series Swing Clamp Cylinder

The SRC series swing clamp cylinder is a pneumatic actuator that converts the linear motion of a piston rod into rotary motion to clamp workpieces. It is available with left-hand (L) or right-hand (R) rotation, in bore sizes of Φ25, Φ32, Φ40, Φ50, and Φ63mm, with rotation angles of 90° or 180°. Clamp arm options include a single-sided arm (no symbol) and a double-sided arm (D). The double-sided arm is not available for the Φ25 bore size. Compact and easy to install, the cylinder is widely used for clamping, positioning, and turning workpieces in automated equipment.

ACK Series Swing Clamp Cylinder

ACK Series Swing Clamp Cylinder

The ACK series swing clamp cylinder is a pneumatic actuator that uses a guide mechanism to convert the piston's linear motion into a 90° or 180° rotation followed by a downward clamping motion. It is commonly used for workpiece clamping, turning, and positioning. The model designation consists of the ACK series code, rotation direction (L for left / R for right), bore size, and rotation angle, as in ACK-L-25-90. The rotation direction determines how the clamp arm swings in and out and should be selected to suit the fixture layout. Rotation angles are available in 90° (right-angle swing-in) or 180° (opposite-side swing-in). Common bore sizes include Φ25, Φ32, Φ40, and Φ50; larger bores provide greater output torque and clamping force. A magnet can be fitted on request for position detection using a magnetic switch. Various mounting accessories are available for installation on fixture plates. When selecting a model, calculate the required clamping torque based on the workpiece mass and clamp arm overhang, and allow sufficient clearance for rotation to prevent interference with surrounding fixtures.

CJP Series Pin Cylinders

CJP Series Pin Cylinders

The CJP series comprises single-acting pin cylinders, also known as pen cylinders, with spring return. Their slender bodies, compact size, and light weight make them suitable for pushing, positioning, stopping, and clamping small workpieces where installation space is limited. The catalog lists bore sizes of 6, 10, 12, and 16 mm. The available mounting style is B (panel mount), and the rod end is optionally available in S (unthreaded) form. Models are coded in the order CJP, mounting style, bore, stroke, and rod-end thread. Select the stroke according to application requirements. In the model code, D indicates a built-in magnetic ring, while CJ indicates no built-in magnetic ring. Models with a built-in magnetic ring can be fitted with magnetic switches for position detection. Use purified compressed air as the operating medium, stay within the allowable stroke and load ranges, and avoid side loading and impacts to ensure smooth operation and a long service life.

MPE Series Threaded Cylinder

MPE Series Threaded Cylinder

The MPE series threaded cylinder is a pneumatic actuator designated by the series code MPE in the catalog. Models are selected by bore, stroke, and the orientation of the piping port on the rodless end cap. The example model MPE 16 X 15 - N indicates a 16 mm bore, a 15 mm stroke, and port orientation N. This series is suitable for compact pneumatic applications requiring threaded mounting or a specific piping orientation. Confirm the bore, stroke, and port orientation combination when selecting a model. This page explicitly provides only the example combination; refer to the applicable selection table for other specifications.

MSQ Series Rack-and-Pinion Rotary Cylinder

MSQ Series Rack-and-Pinion Rotary Cylinder

The MSQ series rack-and-pinion rotary cylinder converts the linear reciprocating motion of a piston into rotary oscillation of the output shaft. It offers high output torque, smooth rotation, a compact design, and slip-free startup. Bore sizes are 20, 25, 32, 40, 50, 63, 80, and 100 mm, selectable according to the load and required torque. Mounting and configuration options include basic, axial, rod-side flange, non-rod-side flange, rod-side trunnion, non-rod-side trunnion, and clevis types. A protective cover is also available. The cylinder can be fitted with a built-in magnetic ring for use with a magnetic switch to detect the end of rotation. The non-lubricated type uses rubber cushioning and can be operated with or without lubrication. The series is widely used for turning, clamping, indexing, and shifting workpieces, as well as opening and closing valves, dampers, and material gates. To specify a complete model, combine the series number, bore size, protective cover, configuration, and magnetic switch model in that order.

MQR Series Low-Torque Rotary Cylinder

MQR Series Low-Torque Rotary Cylinder

The MQR series low-torque rotary cylinder (described in the catalog as a low-rotational-torque rotary joint) is a compact oscillating/rotary cylinder from Haoda Pneumatic (H&N). An internal vane or rack mechanism drives the output shaft at low torque for automated applications such as workpiece turning, indexing, clamping, and oscillating light loads. The model code begins with MQR, followed by the bore size and rotation angle, with protection and magnetic switch codes appended after the angle. For example, MQR20-180SZ specifies a Φ20 bore, a 180° rotation angle, S protection, and a Z magnetic switch. An optional built-in magnetic ring allows a magnetic switch to be fitted for position detection. Basic configurations include a dual-shaft version. The catalog page provides only an example model code and basic parameters (bore size and rotation angle). Final selection must take load inertia, rotation time, and allowable kinetic energy into account. The operating medium is clean compressed air, and use without oil lubrication is recommended.

HFY Series Y-Type Pneumatic Grippers

HFY Series Y-Type Pneumatic Grippers

The HFY series consists of Y-type (angular opening and closing) pneumatic grippers, a type of pneumatic actuator used to pick, grip, position, and transfer small workpieces on automated production lines. The series is available in two configurations: standard double-acting and single-acting, normally open. Double-acting models open and close the fingers by alternately supplying air to the two ports, while single-acting, normally open models use a return spring to remain open when air pressure is lost, making them suitable for applications with safety requirements. Six bore sizes are available: 6, 10, 16, 20, 25, and 32 mm. Larger bores provide greater gripping force and opening stroke, allowing selection based on workpiece size and required gripping force. Models use a simple “HFY-bore” designation, such as HFY-10. Optional finger and gripper body configurations, such as side threaded-hole mounting, through-hole mounting in the opening and closing direction, and flat fingers, can be selected as needed with reference to options for grippers in the same series. Compact and lightweight, the grippers offer flexible mounting options and can be paired with magnetic switches to detect fully open and closed positions. They are widely used in automated equipment for consumer electronics assembly, packaging, lithium battery production, and automotive components.

HDW Series Heavy-Duty Mechanical Gripper

HDW Series Heavy-Duty Mechanical Gripper

The HDW series heavy-duty mechanical gripper is a pneumatic actuator designed for automated gripping and holding. It offers high gripping force and structural rigidity, making it suitable for workpiece handling, positioning, and clamping. The series is specified primarily by bore size, with eight options: Φ20, Φ25, Φ32, Φ40, Φ50, Φ63, Φ80, and Φ100 mm. The base model is coded as HDW-[bore size]. Sensors can be added to detect gripper jaw status. Available sensor models are CS-8G, CS-8GN, CS-8GP, CS-9D, CS-9B, and CS-9H, with a choice of 1 or 2 sensors as needed. Leave this option blank if no sensor is required. When selecting a model, first determine the bore size based on gripping force, workpiece dimensions, and installation space, then select the sensor and quantity according to detection requirements.

RMH Series Magnetically Coupled Rodless Cylinder

RMH Series Magnetically Coupled Rodless Cylinder

The RMH series magnetically coupled rodless cylinder is a basic pneumatic actuator without a switch rail. It uses magnetic coupling and is available in five bore sizes: Φ10, Φ15, Φ20, Φ30 and Φ40mm. Magnetic holding force is available in high (H) and low (L) options to suit load and speed requirements. The stroke is specified to meet application needs. Magnetic switch options include no switches, 2 switches, 1 switch (S) or n switches. With a compact design and no exposed piston rod, the series is suitable for long-stroke automated conveying, positioning and clamping applications where space is limited. When selecting a model, specify the bore, magnetic holding force, stroke and magnetic switch configuration. Note limitations such as the N type being applicable only to the standard type and the magnet being built into the switch rail.

ZDQ Series Stopper Cylinders

ZDQ Series Stopper Cylinders

ZDQ series stopper cylinders are pneumatic actuators used for station positioning and accumulation on automated conveyor lines, including belt conveyors, roller conveyors, and double-speed chain conveyors. The piston rod extends to stop a carrier pallet or workpiece, then retracts to release it after assembly, inspection, routing, or other operations are complete. Magnetic models can be fitted with external magnetic switches to provide stop and release position feedback for PLC interlock control. ZDQ is the primary model designation for the series. The model suffix 32 indicates the bore size, while the number following it indicates the effective stopping stroke (for example, ZDQ32-10 has a 32 mm bore and a 10 mm stroke). The suffix S (magnetic) indicates a built-in magnetic ring for use with a magnetic switch. The series also includes models designated ZHQ. Key selection factors include bore size, stopping stroke, permissible stopping load, cushioning, and magnetic sensing. During installation, ensure the stopping direction is aligned with the workpiece's direction of travel and provide rigid support for the cylinder body.

QX Series Stopper Cylinders

QX Series Stopper Cylinders

QX series stopper cylinders stop, position and release workpieces or pallets on automated conveyor lines. Their hydraulic cushioning absorbs impact smoothly under heavy stopping loads, reducing noise and damage to workpieces. The series includes QX-1, QX-2, QX-3, QX-4 and QX-4-2 models. The QX-4 corresponds to specification 4-250, with a stopping load of 250 kg, a stopping stroke of 30 mm and a lowering stroke of 27.5 mm. The QX-4-2 corresponds to specification 4-2-300, with a stopping load of 300 kg, a stopping stroke of 40 mm and a lowering stroke of 30 mm. Both feature hydraulic cushioning. Select a model based on stopping load (kg), stopping stroke (mm) and lowering stroke (mm) to match the line cycle time and workpiece weight. The cylinder mounts on the side of the conveyor line for cushioned stopping and rapid release.

YGZX Series Stopper Cylinders

YGZX Series Stopper Cylinders

YGZX series stopper cylinders, also known as stop cylinders or hydraulic-buffered stoppers, stop, position and release individual workpieces or pallets on automated conveyor, assembly and logistics sorting lines. Their hydraulic cushioning smoothly absorbs kinetic energy under high impact loads, reducing workpiece impact and operating noise. Key specifications include bore or size code (such as 32 and 50), stopping stroke (40 and 50 mm), lowering stroke (28.5~45 mm), stopping load (500 and 2000 kg), and cushioning type (spring SB, hydraulic SH). Select the stopping load and stroke based on workpiece weight and line speed. The cylinders are compact, easy to install and can be used with sensors for automated interlock control.

TWH Series Stopper Cylinders

TWH Series Stopper Cylinders

TWH series stopper cylinders are pneumatic actuators used to stop and position workpieces at stations on automated conveyor and assembly lines. The piston rod or stop block extends to stop workpiece pallets or positioning fixtures, controlling the production cycle and holding workpieces in place. The catalog provides parameters including model, specifications, bore, stroke, operating type, weight and overall dimensions. When selecting a cylinder, determine the bore and stroke based on the combined weight of the workpiece and pallet, conveyor speed and available mounting space. Also confirm the operating type (such as single-acting or double-acting, normally closed or normally open) and mounting method. The specification table on this page contains repeated fields and missing values following scan recognition. Refer to the complete catalog or the manufacturer's technical documentation for exact bore sizes, strokes, overall dimensions and weights.

TWG Series Stopper Cylinders

TWG Series Stopper Cylinders

TWG series stopper cylinders are pneumatic actuators used to block, position, or stop workpieces on automated conveyor and assembly lines. The series offers a range of bore sizes, strokes, and operating modes, including single-acting and double-acting options, to suit different load and cycle-time requirements. Typically mounted beside or below the line, the cylinder extends its piston rod to stop a workpiece and retracts it to let the workpiece pass. Compact, fast-responding, and impact-resistant, these cylinders are widely used on automated production lines in the automotive, electronics, logistics, and other industries.

RQ Series Compact Cylinder with Air Cushioning

RQ Series Compact Cylinder with Air Cushioning

The RQ series is a compact, flat-profile pneumatic cylinder with an integrated air cushion that absorbs impact and reduces noise and vibration at the end of the stroke. It is suitable for clamping, pressing, lifting, and positioning applications where installation space is limited and smooth stopping is required. The series designation is RQ, with mounting options including B (through-hole, standard) and L. Bore sizes are 20, 25, 32, 40, 50, 63, 80, and 100 mm; the stroke is selected to suit the application (50 mm in the catalog example). The rod end has an M thread for direct connection to a fitting or pressing head. Through-holes in the cylinder body allow it to be bolted directly to a fixture, frame, or plate. A magnetic version with a magnetic switch is available for piston position detection and signal feedback. The operating medium is clean compressed air; an upstream oil mist separator is recommended to keep the air supply dry and free of contaminants.

RZQ Series Compact Cylinder

RZQ Series Compact Cylinder

The RZQ series compact cylinder is a reciprocating pneumatic actuator with a short axial length and compact design. It is suitable for clamping, pushing, positioning, and stopping materials where installation space is limited. The catalog lists four bore sizes: 32, 40, 50, and 63. Select the bore size based on the load and the cylinder area required to produce the desired thrust. Options include A, threaded holes at both ends; B, through-holes; C, without a built-in magnetic ring; and D, double clevis. These respectively accommodate fastening via threaded holes in the flange faces at either end, bolting through the cylinder, omitting the built-in magnetic ring for a simplified external magnetic switch configuration, and pivot mounting with a double clevis. In addition to bore size and mounting style, the final configuration should be selected according to the required stroke, operating mode (single-acting/double-acting), and whether a magnetic switch is needed. Variants such as the CQ2K non-rotating rod type are also available for reference.

MA Series Stainless Steel Mini Cylinders

MA Series Stainless Steel Mini Cylinders

MA Series stainless steel mini cylinders feature a compact, corrosion-resistant stainless steel barrel and are suitable for light-duty pushing, pulling, clamping and positioning in automated equipment. The series includes the MA standard type, MS single-acting front-spring type, MT single-acting rear-spring type and MG dual-rod adjustable-stroke type. Model numbers combine the series code, cushioning type, bore × stroke, rear cover type and mounting type. The catalog example is MA C 25×50-CA-LB. Rubber cushioning and accessories such as CA and LB are available for compact pneumatic applications in electronics, packaging, food and other industries.

DSN Series Stainless Steel Mini Cylinders

DSN Series Stainless Steel Mini Cylinders

The DSN series stainless steel mini cylinder is a FESTO-type round cylinder with a stainless steel barrel and corrosion-resistant construction. It is suitable for short-stroke linear push-pull movements, clamping, positioning, and general pneumatic actuation in automated equipment. Models are selected using code positions for the series number, bore, stroke, elastic cushioning pads, position sensing, and variants. An example from the source is DSN-32-80-P-A-MQ. The same family includes DSNU and ESNU round cylinders, while the DSW series can be custom-made. When selecting a model, confirm the bore and stroke, then specify the suffix according to cushioning, position sensing, and mounting variant requirements.

ZCUK Series Vacuum Cylinders

ZCUK Series Vacuum Cylinders

ZCUK series vacuum cylinders are vacuum actuators for pneumatic automation, commonly used for vacuum gripping, material handling, and positioning. The model code consists of segments indicating the series, built-in magnet or piping configuration, bore, stroke, action type, magnetic switch model, and number of magnetic switches. For example, a cylinder with a 16 mm bore and 20 mm stroke can be fitted with an M9BW magnetic switch. When selecting a model, confirm the mounting and piping configuration, action type, and number of switches. Refer to the catalog for detailed specifications.

MB Series Changtuo Square-Head Cylinder

MB Series Changtuo Square-Head Cylinder

The MB Series Changtuo square-head cylinder features a square-head body and is suitable for pushing, pressing, clamping, positioning, and reciprocating linear motion in automated equipment. According to the catalog, bore sizes of 16-25mm come standard with a magnet but without air cushioning, while bore sizes of 32-40mm come standard with both air cushioning and a magnet. When selecting a model, consider the bore size, stroke, sensor type and quantity, and whether a magnet and air cushioning are required. This series is compatible with the mounting methods used for common standard square-head cylinders.

DA Series Miniature Cylinders

DA Series Miniature Cylinders

The DA series miniature cylinders are identified in the catalog as corresponding to the KOGANEI series. These compact pneumatic actuators are selected by series number, whether variable cushioning and a dust boot or scraper are required, bore size, and stroke. Variable cushioning improves shock absorption at the end of the stroke, while the dust boot or scraper protects the piston rod in environments with heavy dust or cutting fluid splashes. The table repeats the bore and stroke columns, indicating that the series covers multiple bore sizes and stroke lengths. Refer to the complete catalog page or the manufacturer's selection table for available values. These cylinders are suitable for space-constrained automated fixtures and handling, positioning, and pressing mechanisms. OCR extraction of the table on this page is incomplete, and no complete, usable model codes are listed, so no model numbers have been inferred.

HLQ/HLQL Series Twin-Shaft Precision Slide Table Cylinders (Recirculating Ball)

HLQ/HLQL Series Twin-Shaft Precision Slide Table Cylinders (Recirculating Ball)

The HLQ/HLQL series consists of twin-shaft precision slide table cylinders with recirculating ball guides. They are suited to automated equipment requiring high-precision linear movement, positioning, transfer, and clamping support. The series includes HLQ and HLQL models, with selection based on bore size, stroke, magnet code, external stop type, and adjustment device. External stop options include no external stop (basic type), A compression springs at both ends, and B compression spring at the front end. PT or G threads are available for adjustment/thread options. The catalog does not specify the complete bore size and stroke ranges; contact us to confirm non-standard strokes and mounting accessories.

RHC Series High-Speed Cylinders

RHC Series High-Speed Cylinders

RHC series high-speed cylinders are pneumatic actuators designed for high-speed reciprocating motion. Bore sizes include 20, 25, 32, 40, and 50 mm. Mounting styles include B basic, F rod-side flange, G non-rod-side flange, L axial expansion, D double clevis, and T types. Port threads are RC, and the standard minimum stroke is 250 mm. Magnetic switches are optional: no symbol indicates no magnetic switch, and if the number of magnetic switches is not specified, 2 are supplied. These cylinders are suitable for frequent, rapid movements in automated equipment. Mounting accessories, non-standard strokes, and other specifications are available by custom order; please request a quote.

REC Series Sine Cylinder

REC Series Sine Cylinder

The REC series sine cylinder is a double-acting pneumatic actuator. The catalog uses REC as the series designation, with orders specified using a multi-part code: mounting type - bore - port thread type - stroke - magnetic switch model - number of magnetic switches. Mounting options include basic type B, rod-side flange type F, rodless-side flange type G, double clevis type D, and axial expansion type L. Common bore sizes are 25, 40, 50, 80, and 100 mm. Port threads are designated RC, with other thread types available. Magnetic switches can be fitted; the standard configuration includes 2 switches, while no designation indicates no magnetic switch. Stroke limits depend on bore size: bores of 20~32 have a minimum stroke of 150, while a 40 bore has a minimum stroke of 200. Mounting accessories, non-standard strokes, and special specifications require a custom quotation. Other specifications and models will be published as they become available.

HLS/HLSL Series Twin-Shaft Precision Slide Cylinders (Roller Type)

HLS/HLSL Series Twin-Shaft Precision Slide Cylinders (Roller Type)

The HLS/HLSL series comprises twin-shaft precision slide cylinders with twin-shaft guides and roller slides, suited to automated applications requiring high rigidity, smooth linear motion, and precise positioning. The series includes the HLS standard type and HLSL symmetrical type, with bore sizes of 20, 30, 40, 50, 80, and 100 mm. When ordering, specify the bore size, stroke, magnet code, external stop type, adjustment device, and other options. The minimum stroke is 150 mm for bore sizes 20~32 and 200 mm for bore size 40. Mounting accessories, non-standard strokes, and other specifications are custom-made; contact us for a quote.

MXQ Series Pneumatic Slide Table

MXQ Series Pneumatic Slide Table

The MXQ series is a pneumatic slide table (slide table cylinder) with an integrated symmetrical guide rail and table structure, designed for precision linear transfer, positioning, and clamping. The model number consists of five parts: series, bore size, type, stroke, and adjustment device. Bore sizes are 6, 8, 10, 12, 16, 20, and 25 mm, with stroke options depending on the bore size (standard range: 10~200 mm). Types include the basic type and the L symmetrical type. Adjustment options include no adjustment device, front-end adjustment AS, rear-end adjustment AT, hydraulic shock absorbers at both ends B, rear-end hydraulic shock absorber BT, front-end metal stopper C, and various combinations such as F/FR/FP/P with spring cushions and end locks. These provide end-of-stroke stopping, cushioning, and position holding during power loss. The table can be mounted on multiple sides and is suitable for linear transfer mechanisms in automated equipment for electronics, automotive parts, packaging, and other applications.