Pneumatic Components — Page 26

CXSJM Series Twin-Rod Cylinder

CXSJM Series Twin-Rod Cylinder

The CXSJM series twin-rod cylinder is a pneumatic actuator with two parallel piston rods that move in sync. It offers resistance to twisting, precise guidance, and high load capacity, making it suitable for clamping, lifting, anti-rotation, and precision positioning applications. Cylinders can be selected by bore size and stroke. Common bore sizes include 20mm, with strokes ranging from short to medium and long. Flexible mounting options are available, and magnetic switches can be fitted for position detection.

SLP Series 2/2-Way Pilot-Operated Solenoid Valve (Normally Closed)

SLP Series 2/2-Way Pilot-Operated Solenoid Valve (Normally Closed)

The SLP series is a normally closed, 2/2-way pilot-operated solenoid valve with a pilot-operated design, suitable for gases, liquids, and other media. The valve body is available in brass (no code) or stainless steel (B). Thread types include G (no code) and NPT (T). Seals are available in NBR (no code), EPDM (E), VITON (V), or VMQ (Q). Operating voltages include AC 220 V, AC 110 V, AC 24 V, DC 24 V, and DC 12 V. Thread sizes include 1/2", 3/4", 1", 1/4", 1/2", and 2", accommodating a range of piping requirements. Highly reliable and built for a long service life, this valve is widely used in industrial applications such as automation control and fluid handling.

ZCT Series 2/2-Way Piston-Type Stainless Steel Solenoid Valve (Normally Closed)

ZCT Series 2/2-Way Piston-Type Stainless Steel Solenoid Valve (Normally Closed)

The ZCT Series is a 2/2-way, normally closed, piston-type stainless steel solenoid valve designed for fluid control. The valve body is made of stainless steel and is available with G or NPT threaded connections. Operating voltages include AC 220 V, AC 110 V, and DC 24 V. Featuring a pilot-operated piston design, the series offers high-pressure resistance and a long service life. It is widely used in pipelines carrying water, gas, oil, and other media.

YF Series 2/2-Way Solenoid Valve for Burners

YF Series 2/2-Way Solenoid Valve for Burners

The YF Series is a normally closed 2/2-way solenoid valve designed for burners and suitable for controlling fuel lines. Available thread sizes are 1/8", 1/4" and 3/8". The body is available in copper or stainless steel (B), with G or NPT threads (T). Seal materials include NBR, EPDM (E) and VITON (V). Operating voltages are AC 220 V (A), AC 110 V (B), AC 24 V (C) or DC 12 V (D). The model code combines the base model YF-2 with the subsequent options.

SC Series Standard Cylinder

SC Series Standard Cylinder

The SC Series Standard Cylinder is a tie-rod, double-acting cylinder featuring a compact design and easy installation. Bore sizes range from 32 to 250 mm, with strokes selectable to suit your requirements. It supports adjustable cushioning or air cushioning and can be fitted with a magnet for position detection. A variety of mounting styles are available, including FA and FB. Suitable for push-pull, clamping, positioning, and other applications in automation equipment. The working medium is compressed air, and the maximum operating pressure is 1.0 MPa.

CQM Series Compact Cylinder

CQM Series Compact Cylinder

The CQM Series Compact Cylinder is a compact actuator designed for automation equipment where space is limited. Bore sizes are available in 12, 16, 20, and 25 mm, with strokes of 10 or 20 mm. Mounting options include through-hole (standard), foot mount, rodless-side flange, and double-ring types. Operating types include double-acting, single-acting with spring retraction, and single-acting with spring extension. Thread options are female (default) or male (M). The series is available with or without a built-in magnetic ring (both designated CDQM) to meet different position-sensing requirements. Its lightweight body is suitable for high-speed reciprocating motion.

SDA Series Compact Cylinders

SDA Series Compact Cylinders

SDA Series compact cylinders are available in several variants: standard (SDA), dual-rod (SDAD), adjustable dual-rod (SDAJ), and multi-position (SDAT). Bore sizes range from 12 to 50 mm, with strokes from 10 to 50 mm. Choose a version with a magnet (S) or without one. Operating modes include double-acting (D), single-acting, spring-retracted (S), and single-acting, spring-extended (T). Connection threads are available as female (blank) or male (M). Their compact design makes these cylinders suitable for pneumatic applications where space is limited.

MA Series Stainless Steel Mini Cylinder

MA Series Stainless Steel Mini Cylinder

The MA Series stainless steel mini cylinder is a pneumatic actuator widely used in automation equipment. Its stainless steel body offers excellent corrosion resistance, making it suitable for humid or clean environments. This series is double-acting, with single-acting spring-retract or spring-extend options available (indicated by the magnet code). Bore sizes range from 16 mm to 63 mm, and strokes can be customized to meet customer requirements (50 mm is shown as an example). The magnet code can be left blank (no magnetic ring) or specified as S (with magnetic ring), allowing magnetic switches to be installed for position detection. Mounting options include the basic type (blank) and front-cover mounting (front flange FA), accommodating different installation spaces. Compact and reliable, this series offers an alternative to conventional standard cylinders.

CU Series Multi-Position Mounting Cylinder

CU Series Multi-Position Mounting Cylinder

The CU Series Multi-Position Mounting Cylinder is a compact actuator cylinder designed for installation in multiple positions. Nine bore sizes are available: 6, 10, 16, 20, 25, 32, 40, 50, and 63. Nine stroke lengths are also available: 6, 10, 16, 20, 25, 32, 40, 50, and 63. Operating types include double-acting (D), single-acting spring-return (S), and single-acting pre-extended (T). Choose between the standard version (without a built-in magnet) and the version with a built-in magnet. The model code consists of the base model CU followed by the bore size, stroke, and operating type, separated by spaces. With its compact design, this cylinder is suitable for fixed, multi-position mounting in confined spaces.

CUJ Series Compact Free-Mount Cylinder

CUJ Series Compact Free-Mount Cylinder

The CUJ Series Compact Free-Mount Cylinder is available with bore diameters from 4 mm to 100 mm and strokes from 6 mm to 100 mm (in 2 mm increments). It comes in double-acting (D) and single-acting (S, spring return) versions. A magnetic switch (such as the M9N) can be fitted for position detection. Its compact design and flexible mounting options make it suitable for automation equipment where space is limited. Made of stainless steel, it offers corrosion resistance and a long service life. It is widely used in electronics, packaging, food-processing machinery, and other industries.

CXS Series Twin-Rod Cylinder

CXS Series Twin-Rod Cylinder

The CXS Series Twin-Rod Cylinder is a double-rod actuator featuring a dual-piston-rod design and anti-rotation function, making it suitable for applications requiring high-precision positioning. Bore sizes range from 10 to 32 mm, with strokes from 6 to 100 mm. A magnetic switch (Y59A) and PT-threaded ports are available as options. The bearing type is M. It is widely used in automation equipment, pneumatic clamps, and similar applications.

TN Series Dual-Rod Cylinder

TN Series Dual-Rod Cylinder

The TN Series dual-rod cylinder features two guide rods and is ideal for applications requiring high resistance to twisting and smooth linear motion. Its dual-piston-rod design effectively withstands lateral loads, making it suitable for clamping, pushing, and positioning operations in automation equipment. Bore sizes are available in 10, 16, 20, 25, and 32 mm; the example stroke is 50 mm (other strokes can be customized). The cylinder can be fitted with a magnetic switch (S indicates a magnetic switch; blank indicates none). PT threads are standard for the port connections (blank indicates the standard thread). With a compact design and easy installation, this series is widely used on industrial automation production lines.

CXSW Series Twin-Rod Cylinder

CXSW Series Twin-Rod Cylinder

The CXSW series twin-rod cylinder features a dual-piston-rod design for high guiding accuracy and resistance to moment loads. It is suitable for bidirectional linear motion in confined spaces. Bore sizes range from 6 to 32 mm, and stroke lengths from 10 to 50 mm. Bearing types, long-stroke designations, and magnetic switch models are available as options. It is widely used in automation equipment, pneumatic systems, and other applications requiring smooth, stable movement.

MGG Series Compact Guided Cylinder

MGG Series Compact Guided Cylinder

The MGG Series Compact Guided Cylinder is designed for linear motion in confined spaces and provides guidance. An example model code is MGG M B 32 x 100 R, where 32 indicates the bore diameter (mm) and 100 indicates the stroke (mm). Other letters may denote different configuration options. Compact and easy to install, this series is commonly used for gripping, pushing, and similar tasks in automation equipment.

MHS Series Air Gripper (Parallel Opening/Closing Type) / Cylindrical Jaw Body

MHS Series Air Gripper (Parallel Opening/Closing Type) / Cylindrical Jaw Body

The MHS series features parallel-opening and -closing air grippers with a compact cylindrical jaw-body design, suitable for pick-and-place operations on automated production lines. Models include the MHS2, MHS3, and MHS4, among others. Position can be detected using magnetic switches. A sample model code is MHS2-16D1Y59A: 16 indicates the bore diameter, D indicates the type, 1 indicates the stroke, and Y59A indicates the switch model. Refer to the product catalog for detailed specifications.

ZP Series Vacuum Suction Cups

ZP Series Vacuum Suction Cups

ZP Series vacuum suction cups are components used for vacuum gripping in industrial automation. Available in a range of cup diameters (2 mm to 30 mm) and shapes (flat U, ribbed flat C, deep D, and bellows B), they suit different workpieces and handling requirements. They are typically used with a vacuum generator to grip and release objects.

EV Series Vacuum Generators

EV Series Vacuum Generators

EV Series vacuum generators create negative pressure in automated equipment for suction and material handling. A range of nozzle diameters from 0.5 mm to 3.0 mm is available. Depending on your needs, choose the S type with a switch or the adjustable K type; the standard model has no options. The compact design and stable performance make these generators ideal for vacuum-picking systems in the packaging, electronics, automotive, and other industries.

ZPT Series Vacuum Suction Cups

ZPT Series Vacuum Suction Cups

The ZPT Series features suction cups with vertical vacuum connections and no buffer mechanism, designed for applications such as automated material handling and picking. Cup diameters range from 2 mm to 40 mm, with several shapes available: flat (U), ribbed flat (C), deep (D), and bellows (B). A variety of body materials and connection types are offered, including male threads (A5/M5, A8/M8, A01/R1/8) and female threads (B5/M5, B8/M8, B01/Rc1/8). The compact design is easy to install and suitable for end effectors on a wide range of industrial robots.

ZPY Series Vacuum Suction Cups (Without Buffer)

ZPY Series Vacuum Suction Cups (Without Buffer)

ZPY Series vacuum suction cups are vacuum gripping components without a buffer, designed for handling and picking up objects in automated equipment. Cup diameters range from 02 mm to 40 mm in 2 mm increments. Available shapes include flat (U), ribbed flat (C), deep (D), and bellows (B). A choice of body materials and connection types is available to suit different applications. With a simple design and easy installation, this series is widely used in the electronics, packaging, automotive, and other industries.

ZPR Series Horizontal Vacuum Connection Suction Cups

ZPR Series Horizontal Vacuum Connection Suction Cups

ZPR Series Horizontal Vacuum Connection Suction Cups are designed for vacuum gripping and handling workpieces in automated equipment. The series features a horizontal connection design for convenient tubing layout. Available with or without a cushioning mechanism, the cushioned design effectively reduces impact when the suction cup contacts the workpiece. Common models include ZH10-X185, ZH20-X185, ZH30-X185, and ZH40-X185 to accommodate different workpiece sizes. Body materials and connection specifications can be selected to suit requirements (such as M5, M8, and R1/8 female or male threads), meeting a range of installation needs. These cups are widely used for material handling in the electronics, packaging, automotive, and other industries.

PU Series

PU Series

PU Series polyurethane tubing (PU Tube) is made from polyurethane and offers excellent flexibility, abrasion resistance, oil resistance, and weather resistance. It is suitable for pneumatic systems, industrial automation piping connections, and other applications. The product code follows the format “PU outer diameter inner diameter color.” Outer diameter codes range from 03 (3 mm) to 1125 (1125 mm), while inner diameter codes range from 20 (0.2 mm) to 1055 (6.5 mm). Available colors are black (BK), blue (BU), clear (TR), orange (OR), and white (WH). This tubing is widely used in pneumatic air-supply lines, sensor lines, and other applications, and features high elasticity and resistance to aging.

JA Series Floating Joint

JA Series Floating Joint

The JA Series Floating Joint connects a cylinder to a load and compensates for misalignment during installation. Example model code: F M10 x 125 - U, where F denotes the series, M10 the thread size, 125 the length, and U the type.

FV/3FM Series Foot Valves

FV/3FM Series Foot Valves

The FV/3FM series comprises SNS foot-operated directional control valves, available in two types: FV with an aluminum alloy pedal and 3FM with a plastic pedal. Their direct-acting, horizontal design is compact and lightweight. They are suitable for air filtered to 40μm or finer and feature automatic, normally closed foot operation with a 3-port, 2-position configuration. The operating pressure range is 0-1.0MPa (0-14.5psi), proof pressure is 1.5MPa (21psi), and operating temperature is -20~70℃. The FV/3F body is aluminum alloy, while the 3FM body is plastic. No lubrication is required. Port sizes include M5, PT1/8, and PT1/4. A version with a locking pin is available when the switched position must be maintained for extended periods. The aluminum mechanism is stable and reliable, but its compact dimensions make it unsuitable for frequent heavy impacts.

HC85/HCD85 Series Stainless Steel Mini Cylinders

HC85/HCD85 Series Stainless Steel Mini Cylinders

HC85/HCD85 series stainless steel mini cylinders are small, lightweight pneumatic actuators with corrosion-resistant stainless steel bodies and a compact design. They are suitable for automated clamping, pushing and positioning applications where space is limited. The two series are designated HC85 (without a built-in magnetic ring) and HCD85 (with a built-in magnetic ring, compatible with magnetic switches). Types include standard, W and K (non-rotating rod). Four mounting configurations are available: N single-lug basic type, E double-sided boss type, F flat-end basic type and Y rear axial air inlet type. Bore sizes are 8, 10, 12, 16, 20, 25, 32, 40 and 50 mm; strokes are selected from the 25~50 mm range. Cushioning options are elastic cushioning (blank) and air cushioning (C). Options can be combined to suit installation conditions and position detection requirements.

HCA2 Series Pneumatic Cylinders

HCA2 Series Pneumatic Cylinders

HCA2 series cylinders are standard pneumatic cylinders commonly used in factory automation for linear reciprocating push-pull motion, clamping, positioning and other applications. Bore sizes are 32, 40, 50, 63, 80, 100 and 125 mm. Mounting styles include basic, rear-cover-mounted single clevis, rear-cover-mounted double clevis, front-cover-mounted rod-side flange, rear-cover-mounted rodless-side flange, axial foot and center trunnion. Options include a built-in magnetic ring, double rod and magnetic switches (such as M9B), with a configuration of 2 switches available. Stroke is specified according to the model.

HCDQ2B Standard Type (Through-Hole)

HCDQ2B Standard Type (Through-Hole)

HCDQ2B standard through-hole cylinder, with a bore diameter of 12–25 mm and a stroke of 5–30 mm. Features an externally threaded rod end and hexagonal flats, and is suitable for pneumatic actuation in automated equipment. Its through-hole design has no magnetic ring and supports various mounting options, such as threaded holes at both ends and a protruding plug on the rodless side. Made from materials that meet industry standards, it offers high dimensional accuracy and reliability. Widely used in mechanical manufacturing and automated production lines.

HCM2/HCDM2 Series Stainless Steel Mini Cylinders

HCM2/HCDM2 Series Stainless Steel Mini Cylinders

HCM2/HCDM2 series stainless steel mini cylinders feature a compact body and a stainless steel cylinder tube and piston rod for corrosion resistance and long service life. They are suited to space-constrained applications such as small automation equipment, electronics assembly, packaging and inspection mechanisms. Bore sizes are available in 8, 10, 12, 16, 20, 25 and 32, 40mm, with stroke lengths from 10~50mm. Mounting configurations include basic single-lug (N), dual-side boss (E), basic flat-end (F), and rear axial air inlet (Y), eliminating the need for additional fittings in different mounting orientations. Cushioning options include elastic cushioning (blank) and air cushioning for smooth, quiet operation under light loads at high cycle rates. Rod-end thread options include female thread (A), allowing direct connection to a floating joint or workpiece. HCM2 has no built-in magnetic ring, while HCDM2 has a built-in magnetic ring and can be fitted with an external magnetic switch for piston position detection and signal feedback, forming a complete pneumatic control circuit.

HCM2R Series Stainless Steel Mini Cylinders

HCM2R Series Stainless Steel Mini Cylinders

The HCM2R series consists of stainless steel mini cylinders (small, slim pneumatic actuators). Their cylinder bodies and main components are made of stainless steel, offering corrosion resistance, compact size and flexible mounting. They are suitable for light-duty clamping, pushing and positioning in electronics assembly, food packaging, medical devices and various automated equipment. The series includes HCM2R (without a built-in magnetic ring) and HCDM2R (with a built-in magnetic ring for use with a magnetic switch). Mounting options include R, N (basic single-lug type), E (bosses on both sides), F (basic flat-end type) and Y (rear axial air inlet). Standard bore sizes are 8, 10, 12, 16, 20, 25, 32, 40 and 50 mm. Strokes are commonly in the 25~50 mm range and can be customized. Cushioning options are elastic cushioning (blank) and air cushioning (10-25N models only). The rod end is available with internal or external threads. When ordering, compose the model number in the following sequence: series code—mounting type—bore size—stroke—cushioning type—rod-end thread.

HCP95 Series Square-Body Cylinders

HCP95 Series Square-Body Cylinders

The HCP95 series is a range of standard square-body cylinders with mounting surfaces on all four sides for flexible attachment in multiple directions. Seven bore sizes are available: 32, 40, 50, 63, 80, 100 and 125 mm. The stroke can be selected as needed (the catalog example has a 32 mm bore and a 200 mm stroke). Mounting options include basic (B), axial foot (L), rod-end flange (F), head-end flange (G), single clevis (C), double clevis (D) and center trunnion (T), accommodating horizontal, vertical, suspended and pivoting installations. Piston rod options include a standard single rod (blank) or double rod (W), for anti-rotation or synchronized movement at both ends. The cylinder can be fitted with magnetic switches; the catalog example uses switch code Z73, with 2 switches in the standard configuration. The complete model number is assembled in the sequence HCP95-fixing type-type code-mounting type-bore-stroke-magnetic switch, for example HCP95SDB32-200-Z73.

HCP96 Series Square-Body Cylinders

HCP96 Series Square-Body Cylinders

The HCP96 series features a square cylinder body and is suitable for linear push-pull, clamping, and positioning applications in industrial automation equipment. Bore sizes include 32, 40, 50, 63, 80, 100, and 125 mm. Mounting options include basic, axial foot, rod-side flange, non-rod-side flange, fixed rear cover (double-clevis type), single eye, double clevis, and center trunnion, accommodating different mounting orientations and load requirements. Standard single-rod and W double-rod versions are available, and 2 magnetic switches can be fitted for position detection. Specify the bore size, stroke, mounting type, and piston rod configuration when selecting a model.

HCQ2 Series Compact Cylinders

HCQ2 Series Compact Cylinders

The HCQ2 series comprises compact, double-acting, single-rod cylinders with bore sizes from 12 to 100 mm. They use compressed air and have a maximum operating pressure of 1.0 MPa and a minimum operating pressure of 0.05–0.07 MPa. The ambient temperature range is −10 to 70°C (without a magnetic switch) or −10 to 60°C (with a magnetic switch), and the piston speed is 50–500 mm/s. Features include a flush-mounted magnetic switch, good water resistance, and resistance to strong magnetic fields, making these cylinders suitable for use around water and coolant. Standard strokes range from 5 to 100 mm depending on the bore size; longer strokes can be custom-made. Example order codes: HCQ2B16-20D indicates a 16 mm bore, 20 mm stroke, without a magnetic switch; HCDQ2A32-100DCMZ indicates a 32 mm bore, 100 mm stroke, with a magnetic switch.

HCQ2A Series Standard Cylinder

HCQ2A Series Standard Cylinder

The HCQ2A series features cylinders with threaded holes at both ends, bore sizes from 12 to 100 mm, and strokes from 5 to 50 mm. Multiple mounting options are available, including a raised cap on the rodless side and external threads on the rod end. Suitable for automation equipment, workholding fixtures, and other applications.

HCQ2B Series Rodless Cylinder

HCQ2B Series Rodless Cylinder

The HCQ2B Series standard rodless cylinder features a through-hole design, with bore diameters from Ø12 to Ø50 mm and strokes from 5 to 50 mm, depending on the bore size. A magnetic switch mounting ring is available as an option. Its compact design makes it suitable for linear motion in automation equipment. The overall dimensions conform to common industry standards, and a range of bore and stroke combinations is available to meet different load and installation requirements.

HCRB2 Series Vane-Type Rotary Actuator

HCRB2 Series Vane-Type Rotary Actuator

The HCRB2 series consists of vane-type rotary actuators that produce rotary motion through a specified angle as a vane oscillates within the cylinder body. They are suitable for automated applications such as workpiece turning, indexing, and changing clamping direction. The main model is HCRB2BW, with standard rotation angles of 90° and 180° and common bore sizes such as 20. The series is available without a magnetic switch or with a magnetic switch (D) for detecting the end of rotation. An optional U angle adjustment unit allows fine adjustment of the rotation angle. Supply ports can be positioned on the side of the body or axially for convenient piping. Lead wire options include a 0.5m direct lead, L 3m lead, C 0.5m connector type, CL 3m connector type, and CN without lead wires, accommodating different wiring distances to the electrical control cabinet. When ordering, write the complete model code in the following order: main model+magnetic switch+angle adjustment unit+bore size+rotation angle+supply port position+lead wire option.

HDCQ2A Series Standard Cylinder

HDCQ2A Series Standard Cylinder

The HDCQ2A series features cylinders with threaded holes at both ends and bore sizes ranging from 32 to 100 mm. Multiple mounting options are available, including an extended cover on the rodless side and an external thread on the rod end. The cylinder body is made of carbon steel for mechanical castings, with a specially finished inner wall for a smooth surface and long service life. Suitable for automation equipment, special-purpose machines, jigs, and fixtures, these cylinders can be paired with a flow control valve to adjust speed.

HFC1 Series Pneumatic Gripper

HFC1 Series Pneumatic Gripper

The HFC1 series pneumatic gripper (parallel pneumatic gripper) features a dual-piston design with good resistance to bending and torsion, allowing it to withstand substantial dynamic and lateral loads. Bore sizes are 10, 16, 20, 25, 32, 40, 50, and 63 mm. The working medium is air, with an operating pressure range of 1.0~9.0 kgf/cm², a proof pressure of 13.5 kgf/cm², an operating temperature of -20~70℃, a speed range of 30~500 mm/s, a stroke tolerance of -1.0 mm, a non-rotation angle of ±0.1°, and a port size of M5×0.8. Rear mounting and front through-hole mounting are supported. Impact pads or hydraulic shock absorbers at both ends reduce impact speed and extend service life. With high-temperature seals, the gripper can operate at 150℃. During installation, select bolts appropriate for the bore size and keep the tightening torque within the specified range: excessive torque can cause malfunction, while insufficient torque can cause misalignment and detachment.

HMHC2 Series Pivoting Pneumatic Gripper

HMHC2 Series Pivoting Pneumatic Gripper

The HMHC2 series pivoting pneumatic gripper uses a double-acting or single-acting cylinder to rotate two fingers around a pivot, enabling workpieces to be gripped, held, and released. Bore sizes are 10, 16, and 20 mm. Action types include double-acting D and single-acting (normally open) S. Finger options include the standard type (blank) and the through-hole mounting type in the opening/closing direction (2). Compact in design and providing stable gripping force, the gripper can be fitted with magnetic switches to detect open and closed positions. It is widely used in automated assembly, handling, inspection, and other applications.

HMHY2 Series Cam-Operated 180° Pivoting Air Gripper

HMHY2 Series Cam-Operated 180° Pivoting Air Gripper

The HMHY2 series is a cam-operated 180° pivoting air gripper designed for gripping, turning, and opening and closing workpieces in automated equipment. Bore sizes are 10, 16, and 20 mm, with a choice of D double-acting or S single-acting (normally open) operation. Finger mounting options include standard (blank) or through-hole mounting in the opening/closing direction (2). The M9BW magnetic switch is available. The compact design and wide opening angle enable 180° pivoting grip at fixture, assembly, and handling stations.

HMHZJ2 Series Parallel Pneumatic Grippers with Dust Cover

HMHZJ2 Series Parallel Pneumatic Grippers with Dust Cover

The HMHZJ2 series consists of parallel pneumatic grippers with dust covers and a two-jaw parallel opening and closing mechanism. They are suitable for harsh conditions involving dust and cutting fluid splashes. Bore sizes are 6, 10, and 16 mm, with double-acting (D), single-acting normally open (S), and single-acting normally closed (C) options. Dust covers are available in butadiene rubber (CR, labeled as argon butadiene rubber in the original), fluoroelastomer (FKM), and silicone rubber (Si), to suit oil resistance, chemical resistance, or temperature requirements. Magnetic switches such as the A93 can be fitted to detect open and closed positions. The series is commonly used for automated assembly, gripping, and handling.

HMMHZ2 Series Parallel Pneumatic Gripper

HMMHZ2 Series Parallel Pneumatic Gripper

The HMMHZ2 series parallel pneumatic gripper features two fingers that open and close in sync for centered, parallel gripping and handling of workpieces. Four action types are available: D double-acting, S single-acting (normally open), C single-acting (normally closed), and N blank. Finger options include 1 side threaded-hole mounting, 2 through-hole mounting in the opening and closing direction, 3 flat fingers, and 4 no fingers (blank type). These options can be combined to suit the application. The body has mounting positions for optional magnetic switches to detect fully open and closed positions. It is widely used in automated assembly, loading and unloading, sorting, and other applications.

HMS3 Series Pneumatic Grippers (Parallel Opening and Closing)

HMS3 Series Pneumatic Grippers (Parallel Opening and Closing)

The HMS3 series consists of parallel-opening pneumatic grippers with a cylindrical body. A dual-piston or wedge-cam mechanism converts the cylinder's linear thrust into parallel opening and closing motion of the two jaws. The jaws remain parallel throughout their travel, reducing workpiece displacement during gripping and making them suitable for regularly shaped workpieces such as square and cylindrical parts. These grippers are commonly used in automated assembly, handling, loading and unloading, and inspection and positioning. Magnetic switches can be added to detect the fully open and closed positions. The catalog also lists the HMS4 series of parallel-opening grippers with cylindrical bodies on the same page. This related series has the same construction but different body sizes; select between them based on the required gripping force, opening and closing stroke, and body size. Specifications are primarily distinguished by model code. Confirm the bore, gripping force, opening and closing stroke, repeatability, port threads, and other parameters in the relevant specification table.

HMS4 Series Pneumatic Gripper (Parallel Opening and Closing)

HMS4 Series Pneumatic Gripper (Parallel Opening and Closing)

The HMS4 series is a parallel-opening pneumatic gripper with a cylindrical body. Its two jaws open and close in parallel along guide rails to pick and place workpieces on automated production lines, either by gripping their outer surfaces or expanding against their inner surfaces. The jaws remain parallel throughout their travel, providing a large contact area and high centering accuracy. This makes the gripper particularly suitable for regularly shaped workpieces, such as square and cylindrical parts. It can be mounted directly on a robot end flange or fixture. The compact cylindrical body is convenient for confined spaces or installations with multiple grippers arranged side by side. The gripper is typically driven by a double-acting cylinder, with gripping force controlled by adjusting the air supply pressure. Magnetic switches can be added to detect fully open and closed positions, and jaws can be selected to suit the workpiece material and shape. This page provides only the series name and configuration (parallel opening and closing / cylindrical body). Refer to the full catalog page for bore sizes, strokes, gripping forces, repeatability, port threads, and model code combination rules.

HMY1H Series Mechanically Jointed Rodless Cylinder (Linear Guide Type)

HMY1H Series Mechanically Jointed Rodless Cylinder (Linear Guide Type)

The HMY1H series is a linear guide type mechanically jointed rodless cylinder. A linear guide and slider are integrated on the outside of the cylinder body, and the piston is mechanically connected to the slider. This enables long-stroke linear motion without a piston rod, while providing good guide rigidity and resistance to off-center loads. It is suitable for automated conveying, transfer, opening and closing applications requiring long strokes, limited installation space, rotation prevention and high-precision guidance. A typical bore size is 25 mm, and the stroke is selected as needed (300 mm in the example). A stroke adjustment mechanism can also be installed at the stroke end.

HS-225 Series Pneumatic Grippers

HS-225 Series Pneumatic Grippers

The HS-225 series comprises two pneumatic parallel grippers: the HS-225-DHB and HS-225-DSM. The HS-225-DHB weighs 286 g, has a holding capacity of 227 kg, and uses the HS-FC-56212 spindle. Its gripper opens to 90°, and its handle opens to 65°. The HS-225-DSM weighs 315 g; its holding capacity is not specified. It also uses the HS-FC-56212 spindle. This series is suitable for automated applications involving gripping and securing workpieces.

HS-7030 Pneumatic Clamp

HS-7030 Pneumatic Clamp

The HAO SHOU HS-7030 series pneumatic clamps are powered by compressed air and designed for rapid clamping and positioning on automated production lines. Available in a range of sizes, all models feature G1/8" cylinder ports. Mounting dimensions vary across a wide range, including overall lengths of 187–347 mm, opening widths of 40–84 mm, and arm thicknesses of 7.1–12.7 mm. Each model comes with a dedicated clamping arm assembly (such as HS-SA-042007 and HS-SA-085012) to accommodate different workpieces. The series features a compact design and high repeatability, and is widely used in industrial automation, assembly lines, and welding fixtures.

HYC1R Series Magnetically Coupled Rodless Cylinders

HYC1R Series Magnetically Coupled Rodless Cylinders

The HYC1R series consists of magnetically coupled rodless cylinders with a directly mounted, built-in magnetic ring. Power is transferred between the piston and the external slider through magnetic coupling, eliminating the need for a piston rod and significantly reducing the overall installation length. These cylinders are suitable for long-stroke linear conveying and positioning applications where space is limited. Bore sizes are 6, 10, 15, 20, and 25 mm. Two magnetic holding force grades are available: H (high holding force) and L (low holding force), selectable according to load and holding requirements. Guide options are with a switch guide rail (blank, with a built-in magnet) or without a switch guide rail (N). The optional Z73 magnetic switch detects position at both ends of the stroke. Stroke length is customized to operating conditions (the catalog example is 250 mm). The complete model number comprises the series code, bore size, magnetic holding force, stroke, guide rail option, and magnetic switch model, in that order, for example HYC1R-G25-H-250-N-Z73. The series codes also include HYC3R, which likewise features a directly mounted, built-in magnetic ring. When selecting a model, confirm the bore size, holding force grade, stroke, switch guide rail option, and switch model.

IN503 Air Flow Control Valve

IN503 Air Flow Control Valve

IN503 series air flow control valves regulate compressed air flow in pneumatic systems. Three rated flow ranges are available: 54 (50-500L/min), 55 (100-1000L/min), and 56 (200-2000L/min), allowing selection based on actuator air consumption. The valve can be mounted with bracket A (ZS-56-A) or bracket B (ZS-56-B), each supplied with 4 M5×10L cross-recessed pan-head screws. Different cable end types are also available. The valves are suitable for air line speed adjustment and flow control in factory automation equipment.

IR1000/2000/3000 Series High-Pressure Electro-Pneumatic Regulators

IR1000/2000/3000 Series High-Pressure Electro-Pneumatic Regulators

The IR1000/2000/3000 series high-pressure electro-pneumatic regulator is a closed-loop pressure control device that converts electrical signals into pneumatic pressure output. It is available in three sizes—IR1000, IR2000 and IR3000—distinguished by port size and flow capacity. After receiving an analog command, such as a 0~10V voltage or 4~20mA current signal, the regulator uses feedback from an integrated pressure sensor and a pilot-operated design to provide continuous, stepless outlet pressure adjustment. It is suitable for applications requiring remote setting or programmed control of pneumatic pressure. Typical applications include pressure control of pneumatic actuators, pressure loading on test benches, web tension control, and pressure stabilization in spray coating and welding air circuits. Key selection criteria include the pressure setting range, input signal type, port thread size, rated flow and repeatability. The relevant catalog page does not provide a detailed technical specification table or complete ordering code, so consult the manufacturer's latest documentation for specific details.