Pneumatic Components — Page 3

PX Series Y-Type Threaded Tee
KN-PH Series All-Brass Right-Angle Banjo Fitting

MXF Series Ultra-Thin Pneumatic Slide Table (Crossed Roller Guide)
Crossed roller guide.

MCHA Series Pneumatic Gripper

MGP Series Compact Guided Cylinder

KQ2LE Series Bulkhead Elbow Fitting
Mounting hole diameter = nominal locknut thread size + 0.5. Release ring colors: gray, blue, or black; plastic body colors: gray or black.
KN-PV Series All-Brass Elbow Fittings

YFA Series Air-Hydraulic Booster Cylinder

XQ Series Quick Exhaust Valve
KN-SQ Series All-Brass Inline One-Way Flow Control Valve

D-Z73 Series Magnetic Switch
The D-Z73 series magnetic switch is a magnetically actuated position sensor mounted on the outside of a pneumatic cylinder barrel. It detects changes in the magnetic field of a permanent magnet on the cylinder piston and outputs an on/off signal to identify the piston’s extended or retracted position. This enables end-of-stroke confirmation, interlocking, and automated control. Listed alongside the D-A73, D-C73, D-A93, and CS1-U/F/S/G series in the same catalog, it is a common sensor accessory for pneumatic actuators. It typically uses two-wire wiring and can be connected directly in series with a PLC input or relay coil circuit. When selecting a model, check the switch type (contact or solid-state, normally open or normally closed), wiring method and lead length, supply voltage (commonly DC24V), mounting thread (such as M5), and compatible cylinder bore sizes. The example ordering code shown on the right side of the catalog is YFSY3120-M5-DC24V-G, which can be used as a reference for the order format. The switch can be clipped or screw-mounted directly into the cylinder groove, and its position can be adjusted along the stroke to detect the required position for different stroke lengths.

HPLC Series Pneumatic Lever Cylinder
The page states that this series is available in five bore sizes: Ø25, Ø32, Ø40, Ø50, and Ø63. High-performance seals help prevent air leakage and ensure long-term operation. The lever structure makes it easy to secure workpieces with a clamp. If you need to extend the clamping arm, do not exceed 1.5 times its original length. Cylinder body material: Aluminum alloy 6061T6 hard coat; piston: S45C, hard chromed.

D-A93 Series Magnetic Switches
Magnetic switches (magnetic proximity switches) mount in cylinder grooves or on mounting brackets to detect cylinder piston position without contact and output a switching signal for travel limit and position detection. They are the most commonly used position feedback devices for pneumatic actuators. The D-A93 series consists of a reed or Hall sensing element, a lead wire with an LED operation indicator, and a mounting clip. Contact (reed) and non-contact (solid-state) types are available, with two-wire or three-wire outputs. A common rated voltage is DC24V, with an M5 mounting configuration and a choice of lead wire lengths. When selecting a switch, confirm the switch type (contact/non-contact), wiring and output logic (normally open/normally closed), rated voltage and current, operation indicator, lead wire length, and cylinder groove compatibility of the mounting clip (such as the different profiles and groove types for the CS1 series and D-A73/D-Z73/D-C73). The example code on this page is YFSY3120-M5-DC24V-G, indicating the base model, mounting interface, rated voltage, and option suffix, respectively.

YFSY Series Solenoid Valves

KJT Series T-Type Male Threaded Tee Fittings
Release ring colors: gray, orange-red, black; plastic body colors: gray, black. Release ring colors: gray, orange-red, black. Plastic body colors: gray, black.

HVSS Series, Threaded Connection Type
Threaded connection type.

HLS Series Twin-Shaft Precision Slide Cylinder (Roller Type)
4M(NAMUR) Series Solenoid Valve (5-Port, 2-Position)
KN-PU Series All-Brass Straight Union

TAC2-3 Series Toggle Valves
PY Series Y-Type Tee

MS-MF/HSV Series Manual Slide Valves
3-port, 2-position valve. A variety of male and female threaded connections suit different piping systems. Smooth sliding action provides a comfortable feel, and the valve has a large effective flow area. The spool is hard anodized and the valve body is anodized for long-lasting color.

CPC Series Threaded Straight Connector

VM200 Series Mechanical Valve

PHT-G(2) Series In-Line Elbow (2) - G Thread
PC-C Series Straight Connector with Parallel Thread
KN-PG Series All-Brass Straight Reducing Fitting

4F210 Series Foot Valve
2-position, 5-way foot valve.

CBQ Series Compact Cylinder with End Lock

PA69 Series End-of-Line Automatic Drain
Commonly used to automatically remove accumulated water from low points in pipelines, refrigerated air dryers, oil-water separators, air tanks, and the bottoms of various air filters. It can be installed where manual drainage is inconvenient, such as in high, low, or confined spaces, particularly where air consumption is high and frequent draining is required. Features include a highly reliable forced-discharge system, automatic drainage, and a metal protective guard for the bowl. It must be installed vertically with the drain port facing downward.

BXG Series Stainless Steel Push-in Fittings
The page lists the BXG-PC-G straight connector and the BXG-PL-G threaded elbow connector.

BXG-PB Series Center-Threaded Tee Fitting

TO-PC Series Straight Male Threaded Fitting

DSP-5 Series Digital Pressure Gauge
PZB Series Threaded Cross

MXH Series Compact Pneumatic Slide Table (Linear Guide)

4A100 Series Air-Piloted Valves (5-Port, 2-Position / 5-Port, 3-Position)
Spool-type construction provides good sealing and responsive operation. Three-position pneumatic valves are available with three center functions. Double-piloted two-position valves have a memory function. The specially machined bore minimizes friction and starting pressure and extends service life. No oil lubrication is required. Valves can be assembled on a manifold base to save installation space.

CBL Series Quick-Connect L-Shaped Threaded Elbow
PV Series Elbow

BXG-PZA Series Stainless Steel Push-to-Connect Cross Fitting

BXG-PMF Series Straight Female Threaded Bulkhead Connector

CQMB Series Compact Cylinder
4V400 Series Solenoid Valves
5-port, 2-position and 5-port, 3-position.

BXG-PE Series Tee Fitting

APL-G Series Plastic Push-to-Connect Fittings
Plastic Push-to-Connect Fittings

4V Series Solenoid Valve

KQ2U Series U-Type Fittings
The KQ2U series consists of pneumatic push-in U-type fittings (U-type tees and manifold-style push-in tube fittings) for quickly splitting one air line into multiple lines or directly connecting tubes of the same or different diameters. These tool-free fittings come in three configurations: male-threaded, equal-diameter, and reducing U-type fittings. Compatible tube diameters are Φ4, Φ6, Φ8, Φ10, Φ12, and Φ16. Connection options include M5×0.8 and M6×1.0 metric male threads; 1/8, 1/4, 3/8, and 1/2 imperial threads; or 00 (equal-diameter tube connection) and 06 (reducing tube connection). Release rings are available in gray, blue, or black, and plastic bodies in gray or black, making it easy to distinguish lines by color. Simply insert the tube fully to lock it in place, and press the release ring to remove it. These fittings are suitable for quick assembly and routine maintenance of compressed air lines.

CDRB2 Series Vane-Type Rotary Actuator
With magnetic switch.