Pneumatic Components — Page 12

STM Series Slide Table Cylinder

STM Series Slide Table Cylinder

The STM series slide table cylinder is a guided linear pneumatic actuator consisting of a cylinder body, two guide rods, and a sliding platform. The piston rod drives the platform in precise reciprocating motion along the guide rods. Workpieces, fixtures, or sensors can be mounted directly on the platform, which offers better resistance to torsion and off-center loads than a conventional single-rod cylinder. Common selection parameters include bore size (compact sizes such as 6, 10, 16, 20, 25, and 32), stroke (short strokes from a few millimeters up to around 100 mm), operation (single-acting spring return or double-acting), magnetic switches (available with a magnetic ring), and mounting style (basic, flange, etc.). This series is often considered alongside compact guided cylinders such as MGG and dual-rod cylinders such as TDA/CXS. It is widely used in automated electronic assembly, packaging, inspection, and fixture positioning equipment where compact size, short stroke, and smooth guided motion are required. This catalog page provides only the series name and product image; specific bore, stroke, magnet, and other specifications must be confirmed using the selection chart.

CXSW Series Twin-Rod Cylinder

CXSW Series Twin-Rod Cylinder

The CXSW series is a twin-rod cylinder with two parallel piston rods that operate simultaneously. It offers strong resistance to torsion and off-center loads, as well as high guiding accuracy. It is suitable for clamping, lifting, transfer and other applications where workpiece rotation must be prevented or lateral loads must be supported. Bore sizes are 32, 40, 50, 63, 80 and 100 mm, with standard strokes from 10 mm to 100 mm (10/20/30/40/50/75/100). An integrated magnetic ring is optional (S indicates a magnet; a blank position indicates no magnet), allowing position detection with a magnetic switch. Mounting options include basic, rear single clevis CA, rear double clevis CB, front flange FA, rear flange FB, foot mount LB, trunnion mount TC, and trunnion mount with foot bracket TC-M. The ordering code combines the series code, bore, stroke, magnet code and mounting type in sequence, for example CXSW-M-20x50-□-Y59A.

SC Series Standard Cylinder

SC Series Standard Cylinder

The SC series standard cylinder (concealed tie-rod type) features an aluminum alloy barrel and concealed tie rods for linear reciprocating motion in automated equipment. Bore sizes include 32, 40, 50, 63, 80, and 100 mm, with stroke lengths from 10~100 mm available. The model code specifies, in order, the series number, bore, stroke, adjustable stroke (N adjustable stroke distance / S with magnet), magnet code (S with magnet, blank without magnet), and mounting type (basic type, CA rear single clevis, CB rear double clevis, FA front flange, FB rear flange, LB foot mounting, TC pivot mounting, TC-M pivot mounting with foot bracket). Multiple variants are available, including standard double-acting, double-rod, adjustable double-rod, and multi-position types, with flexible mounting options.

SI Series Standard Cylinders

SI Series Standard Cylinders

SI series standard cylinders feature concealed tie rods and are available in standard, double-rod, adjustable double-rod, and multi-position configurations. Bore sizes range from 32~100mm, and the stroke can be selected to suit the application. Options include an adjustable stroke (N), a built-in magnet (S), and various mounting styles, such as FA front flange, CA single clevis, CB double clevis, LB foot mount, and TC trunnion mount. Compact and easy to install, these cylinders provide pneumatic actuation for a wide range of automated equipment.

DNC/SE Series Standard Cylinders

DNC/SE Series Standard Cylinders

DNC/SE series standard cylinders are general-purpose, double-acting cylinders with mounting dimensions compliant with the ISO6431 international standard. Bore sizes include 32, 40, 50, 63, 80, 100 and 125 mm, with common stroke lengths of 10, 20, 30, 40, 50, 75, 100 and 125 mm to meet most linear push-pull requirements. The cylinders feature an aluminum alloy barrel and concealed tie rods for a compact design. Standard mounting holes allow interchangeable installation with a wide range of international standard cylinders. An optional built-in magnetic ring (MDB type) enables position detection with magnetic switches. Mounting accessories include SNCB double-clevis mounts, single-clevis mounts and HNC foot mounts, supporting flange, foot, clevis and pivoting configurations. Pneumatic cushioning (PPV) reduces impact and noise at the end of the stroke, while the adjustable stroke (N) option provides mechanical travel limiting for certain applications. These cylinders are widely used in automated assembly lines, packaging machinery, tooling and fixtures, and material handling.

MBB Series Standard Cylinders

MBB Series Standard Cylinders

MBB series standard cylinders are tie-rod cylinders suitable for linear pushing and pulling, clamping, lifting, and other industrial automation applications. The catalog includes the basic MBB model and the MDBB model with a built-in magnetic ring. Common bore sizes are 32, 40, 50, 63, 80, 100, and 125 mm, with stroke options including 10, 20, 30, 40, 50, 75, 100, 125, and 150 mm. Adjustable stroke, a built-in magnet, and mounting styles such as FA/FB/CA/CB/LB/TC/TC-M can be selected as needed. An example model code is MBB 50×150-N S FA.

MAL Series Aluminum Alloy Mini Cylinders

MAL Series Aluminum Alloy Mini Cylinders

MAL series mini cylinders feature an aluminum alloy body and a compact, lightweight design. They are suitable for pushing, pulling, clamping, and positioning applications where space is limited in automated equipment. The series includes basic, dual-rod, and adjustable dual-rod versions, with bore sizes of 16, 20, 25, 32, and 40 mm and common stroke lengths of 10, 20, 25, 32, 40, and 50 mm. Options include a magnet (S) and mounting styles such as a front flange (FA). The model code typically consists of the MAL series designation, bore × stroke, magnet code, and mounting style. These cylinders can be used with pneumatic control valves, fittings, and magnetic switches.

MA Series Stainless Steel Mini Cylinder

MA Series Stainless Steel Mini Cylinder

The MA series is a compact, double-acting stainless steel mini cylinder for pneumatic applications. Its corrosion-resistant stainless steel barrel and compact design make it suitable for light-duty automation tasks in confined spaces, including clamping, sorting, positioning and pushing. The ordering code combines the series number, bore, stroke, magnet code and mounting type in sequence. The magnet code indicates whether a magnetic ring is built in for position detection by an externally mounted magnetic switch; the mounting type specifies accessories such as FA. Common bore sizes include 32 and 50, and the stroke is selected from the standard range according to operating conditions. Mounting options include the basic type or versions with accessories such as flanges or clevises. Write the complete ordering code in the order “series number-bore-stroke-magnet code-mounting type,” and check that the stroke is compatible with the bore and that the mounting accessory threads are correct.

CJP Series Pin Cylinder

CJP Series Pin Cylinder

The CJP series pin cylinder, also known as a pen cylinder, is a compact, lightweight, single-acting miniature cylinder with spring return. It is suitable for precision positioning, workpiece ejection, stopping, sorting, and driving small fixtures in industries such as electronics, semiconductors, medical devices, and packaging. Bore sizes are 6, 10, and 15 mm, with primarily short strokes such as 5 mm. The mounting type is B (basic type), with direct threaded or flange mounting. Optional magnetic switches, such as 1973K, 1195K, and 1197K, provide position detection. The cylinder body is typically made of stainless steel or aluminum alloy, offering corrosion resistance, fast response, and a long service life. To select a model, combine the specifications in the order “bore diameter-stroke-mounting type.” For example, a CJPB cylinder with a bore of 10, a stroke of 5, and mounting type B is designated CJPB10×5-B.

CJP Series Double-Acting Pin Cylinders

CJP Series Double-Acting Pin Cylinders

The CJP series double-acting pin cylinder (CJPB type) is a compact, lightweight pneumatic actuator with a slender, pin-shaped piston rod. It is primarily used for lifting, positioning, pushing, and clamping in confined spaces in electronics, semiconductors, precision assembly, and inspection fixtures. Six bore sizes are available: 6, 10, 15, 20, 25, and 32 mm. Six stroke lengths are available: 10, 15, 20, 25, 32, and 40 mm. Model numbers follow the sequence “series number-bore-stroke-double-acting-rod end thread”: D denotes the double-acting type; the rod end can be threaded (blank) or unthreaded (B). The basic type does not include a switch mounting rail. Flange-mounted and magnet-free variants are also available, and some models can be fitted with magnetic switches for position detection. These cylinders are suited to high-frequency, short-stroke precision applications.

MXQ Series Pneumatic Slide Table

MXQ Series Pneumatic Slide Table

The MXQ series pneumatic slide table (recirculating linear guide/twin-cylinder type) is a pneumatic actuator designed for precise linear motion in automated equipment. Its recirculating linear guide and twin-cylinder drive provide high rigidity and guiding accuracy, allowing it to withstand moderate eccentric loads and moments while delivering smooth motion and repeatable positioning. The series is suitable for linear conveying, positioning, press-fitting, and transferring workpieces, and is commonly used with pneumatic components such as cylinder control valves and magnetic switches. When selecting a model, consider the bore size, stroke, mounting method, and load conditions to ensure that the slide operates within its permissible load range.

CUJ Series Miniature Free-Mount Cylinders

CUJ Series Miniature Free-Mount Cylinders

The CUJ series miniature free-mount cylinders, also referred to as the CU series in the original title, include the CUJB basic type and versions with a built-in magnetic ring. Their compact size and flexible mounting orientations and methods make them suitable for short-stroke pushing, clamping, and positioning in space-constrained applications such as electronics assembly, packaging, and fixtures. The model codes in the catalog begin with CUJB, with bore options including Φ4, Φ6, Φ10, Φ20, and Φ32. Some table rows contain OCR duplications or expansions; refer to the original catalog for authoritative specifications. CS1-U, CS1-F, CS1-S, CS1-G, D-A73, D-Z73, D-C73, and D-A93 magnetic switches can be fitted for position detection.

FV Series Foot Valves

FV Series Foot Valves

The FV series comprises pneumatic foot-operated directional control valves. Pressing the pedal changes the spool position to control the extension and retraction of cylinders and other actuators. These valves are suitable for applications where both hands are needed for the work and cannot be used to operate a valve. Common applications include tube benders, welding equipment, press-fitting equipment, packaging machinery, and various tooling and fixtures. The series includes two basic valve types: 320 (3-port, 2-position) and 420 (5-port, 2-position). The third position uses 2 to indicate the 200 series size. The valve body has a plate-mounted/direct-acting design. Port size and operating pressure are determined by the selected 200 series specification, and the panel should be selected according to the actual pipe size and air supply pressure. During installation, allow sufficient space for pedal travel and consider the exhaust direction. Protect the pedal pivot from direct exposure to dust and cutting fluid.

JMJ Series 5-Port 2-Position Mechanical Valves

JMJ Series 5-Port 2-Position Mechanical Valves

The JMJ series 5-port 2-position mechanical valve is a mechanically operated pneumatic control component used to control the direction of cylinders and other actuators in automated equipment. The series features a robust valve body and a G1/4" port size, with position code 52 indicating a 2-position 5-way configuration. Actuator options include basic, roller, selector knob, locking button, flat button, projecting button and large round button styles to meet different operating needs. The model code follows the format JMJ[position]-[port size][button]. For example, JMJ52-2R denotes a 5-port 2-position mechanical valve with G1/4" ports and a roller actuator. These valves are widely used on automated production lines in the packaging, food, textile and electronics industries.

MAR Series Precision Pressure Regulator

MAR Series Precision Pressure Regulator

The MAR series precision pressure regulator provides precise pressure reduction and regulation of compressed air in pneumatic systems. The standard pressure adjustment range is 0.05~0.85MPa. Four low-pressure versions, 1K, 2K, 3K and 4K, offer ranges of 0.05~0.1MPa, 0.05~0.2MPa, 0.05~0.3MPa and 0.05~0.4MPa, respectively. The specification code includes sections for the model, port/thread and options. Confirm specific combinations against the complete coding rules. It is suitable for pneumatic control circuits requiring highly stable output pressure.

APC Series Plastic Push-to-Connect Fittings

APC Series Plastic Push-to-Connect Fittings

APC series plastic push-to-connect fittings (one-touch tube fittings) provide quick connections for PU and nylon tubing in pneumatic systems. The tubing direction can be freely adjusted even after installation. The fittings feature nickel-plated brass and polybutylene terephthalate (PBT) plastic bodies for resistance to corrosion and contamination. All R and NPT threads are pre-coated with sealant, while straight threads come standard with an O-ring seal. Suitable for air and vacuum, they have an operating pressure range of 0~1.0 MPa (150 psi), a vacuum pressure of -100 kPa, a proof pressure of 1.5 MPa, and an operating temperature range of 0~60℃. Tube sizes range from APC04~APC16, with M5, M6, R1/8, R1/4, R3/8, and R1/2 threaded connections, as well as G parallel thread versions.

APOC/APCF Series Plastic Push-in Fittings

APOC/APCF Series Plastic Push-in Fittings

The APOC/APCF series comprises engineering-plastic push-in pneumatic fittings for quick connection and disconnection of nylon and PU tubing to pneumatic components such as cylinders, solenoid valves, and air preparation units. APOC is a male straight fitting (including an internal hex male straight version), while APCF is a male socket fitting with two subseries: APCF-G (G parallel pipe thread) and APCF-N (NPT American tapered pipe thread). Tube sizes cover 4, 6, 8, 10, 12, 14, and 16 mm and 5/32, 1/4, 5/16, 3/8, and 1/2 inch; thread sizes include M5, M6, R1/8~R1/2, G1/8~G1/2, and NPT1/8~NPT1/2. The body is made from engineering plastics such as POM or nylon, with nitrile rubber (NBR) seals. The fittings are suitable for compressed air, vacuum, and some water or liquid lines, with an operating pressure of approximately 0~1.0 MPa and a temperature range of approximately -20~+60 ℃. The catalog lists outline and mounting dimensions for each model, including D (tube outside diameter), R (thread size), A, B, P, S, and X, to assist with selection and piping design.

APCF Series Plastic Push-in Fittings

APCF Series Plastic Push-in Fittings

APCF series plastic push-in fittings quickly connect pneumatic tubing to threaded ports. Their bodies are made of engineering plastics such as nylon or polyoxymethylene, with metal or plastic threads, and are suitable for media such as compressed air and water. They are available in three thread types: APCF (R tapered pipe thread/BSPT), APCF-G (G parallel pipe thread/BSPP), and APCF-N (NPT American tapered pipe thread). They accommodate tubing outside diameters of 4/6/8/10/12mm and 5/32, 1/4, 5/16, 3/8, and 1/2 inches. Key installation dimensions include A (threaded end length), B (overall length), S (width across flats), and X (tube insertion dimension). Both metric and imperial versions are available. Simply push the tubing into the fitting to seal and lock it in place. Easy to install and remove, these fittings are widely used for quick tubing connections in automation equipment, pneumatic components, and piping systems.

APMF Series Plastic Push-in Fittings

APMF Series Plastic Push-in Fittings

The APMF series consists of straight male-threaded plastic push-in fittings for quickly connecting and disconnecting nylon or PU tubing and female-threaded ports in compressed air lines. One end has a push-in collet for tubing with an outside diameter of 4, 6, 8, 10 or 12mm, with imperial sizes of 5/32" and 1/4". The other end has a straight male-threaded connection, available in three thread standards: R1/8~R1/2 (BSPT), G1/8~G1/2 (BSPP), and NPT1/8~NPT1/2, identified by no suffix, a G suffix, and an N suffix, respectively. For each tube diameter and thread size, the catalog lists dimensions including D (applicable tube outside diameter), R/G/NPT (connection thread), M (fitting body thread), A (width across flats), B1 (overall length), B2 (threaded section length), and S1/S2 (hex widths across flats), making it easier to select a fitting for the available installation space and line diameter. For the same tube diameter, the 01/02/03/04 codes correspond to different thread sizes. Check both the thread standard and tube diameter when selecting a model.

APL Series Plastic Push-to-Connect Fittings

APL Series Plastic Push-to-Connect Fittings

The APL series consists of plastic male elbow push-to-connect fittings (90° fittings) for right-angle connections between tubing and female threaded ports in pneumatic systems. The fitting body is injection-molded from engineering plastic. The push-to-connect side locks the tubing in place upon insertion and releases it when the release ring is pressed, allowing efficient, tool-free assembly. The male threaded side screws directly into an actuator or valve manifold. Four tubing outside diameters are available: 4, 6, 8, and 10 mm. Thread options include M5 and M6 metric fine threads and four pipe thread codes, 01~04, to accommodate ports on miniature cylinders, solenoid valves, pneumatic grippers, and other devices. These fittings are widely used in pneumatic control circuits in automation equipment, packaging machinery, and electronics assembly lines. Select a model based on the tubing outside diameter and mating thread specification.

APLL/APLF Series Plastic Push-in Fittings

APLL/APLF Series Plastic Push-in Fittings

APLL/APLF series plastic push-in fittings quickly connect nylon and polyurethane tubing to threaded ports in pneumatic systems. Tubing can be inserted and removed without tools; simply press the release ring to disconnect it. The fittings are available in a range of tube diameters and thread sizes: metric tube diameters of 4, 6, 8, 10, and 12 mm, and imperial tube diameters of 5/32, 1/4, 5/16, 3/8, and 1/2. Thread types include M5 and M6 metric threads, R1/8~R1/2 tapered pipe threads, G1/8~G1/2 parallel threads (model suffix G), and NPT1/8~NPT1/2 American tapered pipe threads (model suffix N). The catalog lists D (tube diameter), R (thread), and A, B, C, S, and X overall and installation dimensions for each model, making it easy to check wrench clearance and tubing routing. The model code format is main model-tube diameter-thread specification, for example APLL06-01, APLF08-04G, and APLF1/4-02N.

APLF Series Plastic Push-in Fittings

APLF Series Plastic Push-in Fittings

The APLF series comprises straight male-threaded plastic push-in fittings, with a push-in tube connection at one end and an R, G or NPT male thread at the other. They can be screwed directly into threaded ports on cylinders, solenoid valves, air preparation units and other components. Supported tube outside diameters include metric Φ4, Φ6, Φ8, Φ10 and Φ12, and imperial 5/32″, 1/4″, 5/16″, 3/8″ and 1/2″. Each tube size corresponds to four thread sizes, 01~04 (R1/8~R1/2 and their G and NPT equivalents). The injection-molded engineering plastic body features a stainless steel retaining clip and rubber seal, allowing pneumatic tubing to be quickly connected, disconnected and reused without tools. The range comprises three subseries: APLF (R tapered pipe thread), APLF-G (G parallel pipe thread) and APLF-N (NPT American tapered pipe thread). They are widely used in automated production lines, packaging machinery, electronic equipment and pneumatic control circuits.

APB Series Plastic Push-in Fittings

APB Series Plastic Push-in Fittings

APB series plastic push-in fittings enable quick connection and disconnection of tubing in pneumatic lines. They accommodate tube diameters of 4, 5/32, 6, 8, 10, 12, 14, and 16, with threaded ports ranging from M5 and M6 to R1/8~R1/2, G1/8~G1/2, and NPT1/8~NPT1/2. The range consists primarily of straight fittings. Model suffixes 01/02/03/04 generally correspond to different thread sizes; the G suffix denotes a G thread, and the N suffix denotes an NPT thread. The catalog provides overall and installation dimensions, including D, R, A, B, C, S, and X, to facilitate fitting selection and pneumatic line layout.

APD Series Plastic Push-to-Connect Fittings

APD Series Plastic Push-to-Connect Fittings

APD series plastic push-to-connect fittings are straight pneumatic fittings for quickly connecting tubing to female or male threaded ports in pneumatic lines. The tubing locks and seals automatically when fully inserted; press the release ring to remove it. No tools are required, making assembly and maintenance easy. The fitting body is made of engineering plastic and accommodates PU or nylon tubing with an outer diameter of 4, 6, 8, or 10 mm. Thread options include M5 and M6 metric fine threads and R1/8, R1/4, R3/8, and R1/2 tapered pipe threads. Multiple thread sizes are available for each tube diameter to suit different flow rates and installation spaces. The catalog lists D (tube outer diameter), R (thread size), and A, B, C, S, and X dimensions for each model. B is the overall length, S is the width across flats, and X is the outer diameter of the insertion end, making it easy to plan tubing layouts and check clearances.

APX Series Plastic Push-to-Connect Fittings

APX Series Plastic Push-to-Connect Fittings

APX series plastic push-to-connect fittings are straight fittings for pneumatic lines, compatible with plastic air tubing with outside diameters of 4, 6, 8, 10, and 12 mm or 5/32, 1/4, 5/16, 3/8, and 1/2 inches. The series comprises three subseries by thread type: APX (M5, M6, R1/8~R1/2), APX-G (G1/8~G1/2), and APX-N (NPT1/8~NPT1/2). Model numbers indicate both tube diameter and thread specification. The catalog provides D, R, A, B, S, X, and other overall and mounting dimensions to aid product selection and tubing layout. Push-to-connect installation simplifies pneumatic circuit assembly and maintenance. These fittings are widely used in automated equipment, pneumatic fixtures, packaging machinery, and general industrial pneumatic systems.

APH Series Plastic Push-to-Connect Fittings

APH Series Plastic Push-to-Connect Fittings

APH series plastic push-to-connect fittings (one-touch pneumatic fittings) provide quick, tool-free connection and disconnection between pneumatic tubing and threaded ports. They are widely used in pneumatic control systems and automated equipment. The engineering plastic body is lightweight and corrosion-resistant. Thread options include M metric, R/Rc tapered sealing, G parallel pipe, and NPT American tapered threads, compatible with ΦD 4/6/8/10/12mm tubing. The catalog provides complete external dimensions, including ΦD tube diameter, R thread specification, L1~L4 lengths, ΦD1 diameter, and S width across flats, to simplify selection and installation. Model numbers begin with APH, followed by tube diameter and thread specification codes. The G suffix denotes a G parallel pipe thread.

APHF Series Plastic Push-in Fittings

APHF Series Plastic Push-in Fittings

APHF series plastic push-in fittings are made of high-quality engineering plastic and are corrosion-resistant, lightweight, and easy to install. They provide quick connections between tubing and threaded ports in pneumatic systems and are widely used in automation equipment, pneumatic tools, packaging machinery, and other applications. The series is available for multiple tube outer diameters (Φ4, Φ6, Φ8, Φ10, Φ12 and imperial sizes 5/32, 3/16, 1/4, 5/16, 3/8, 1/2) and thread types (M5, R1/8, R1/4, R3/8, R1/2, G1/8, G1/4, G3/8, G1/2, NPT1/8, NPT1/4, NPT3/8, NPT1/2) to meet different pneumatic circuit connection requirements. The fittings have a compact design and reliable seals, with a typical operating pressure range of 0~1.0 MPa and an operating temperature range of 0~60℃.

APHT Series Plastic Push-in Fittings

APHT Series Plastic Push-in Fittings

The plastic push-in fitting range includes APHT, APHT-G, APKB, APKB-G, APKD and APKD-G types for quick connection and branching of nylon and polyurethane tubing in pneumatic systems. APHT push-in straight and branch fittings have PT(R) or G threads and accommodate ΦD 4/6/8/10/12mm air tubing. Thread sizes range from PT1/8~PT1/2 and G1/8~G1/2. The table lists L1~L6 lengths, ΦD1 outside diameter and S hex across-flats dimensions. APKB/APKD series fittings are cartridge-type push-in fittings, with installation dimensions including L, A, B, C, ΦD, Φd, H, G/R threads and X1/X2. Made from engineering plastic, the fittings are easy to install and remove without tools and are suitable for pneumatic lines in automated equipment.

APHT-G Series Plastic Push-in Fittings

APHT-G Series Plastic Push-in Fittings

The APHT-G series consists of straight male-threaded plastic push-in fittings commonly used for quick connections in pneumatic systems. One end accepts nylon or PU tubing of the corresponding outside diameter for quick, tool-free installation and removal. The other end has a G-series (BSPP parallel) male thread for connection to a threaded port. The series accommodates five tube outside diameters, ΦD 4, 6, 8, 10 and 12 mm, and four port thread sizes, G1/8, G1/4, G3/8 and G1/2. Key dimensions include tube outside diameter ΦD, port thread G, lengths L1~L6, fitting diameter ΦD1 and width across flats S. Models follow the naming format APHT+tube diameter code-port number(3)G. For example, APHT06-02(3)G denotes a Φ6 tube and a G1/4 port. These fittings are similar in appearance to the related APHT series (PT/R tapered threads), but differ in thread type. They are suitable for connecting tubing to pneumatic actuators, cylinders and solenoid valves.

APKB Series Plastic Push-to-Connect Fittings

APKB Series Plastic Push-to-Connect Fittings

APKB series plastic push-to-connect fittings are available in two variants: APKB with R threads and APKB-G with G threads. They provide quick tubing connections in pneumatic systems. Made from high-quality plastic, they offer easy installation, reliable sealing, and corrosion resistance. Compatible tube outside diameters ΦD are 4, 6, and 8 mm, with thread sizes including R1/8, R1/4, R3/8, G1/8, and G1/4. The typical operating pressure is 0~1.0 MPa and the operating temperature is 0~60°C. They are widely used in automation equipment, pneumatic control cabinets, and other applications.

APKB-G Series Plastic Push-In Fittings

APKB-G Series Plastic Push-In Fittings

The APKB-G series consists of plastic push-in fittings for pneumatic lines. They feature an engineering plastic body and a metal threaded section. Tubing locks in place when inserted and can be removed by pressing the release ring. The fittings provide quick connections and branches for air lines, including vacuum lines. Available sizes accommodate tubing outer diameters ΦD of 4, 6, 8, 10 and 12 mm. Threaded ends are available with G (BSPP parallel pipe thread) or R/PT (tapered pipe thread). Within the same family, APKB models have R threads and APKB-G models have G threads; other configurations include APHT and APKD. Selection parameters in the catalog include ΦD (tube diameter), Φd (bore diameter), G/R thread size and dimensions L, A, B, C, H, X1 and X2. Select the part number using the combination of tubing outer diameter and thread size. To install, insert the tubing fully and screw the threaded end into the matching female port. These fittings are suitable for quick pneumatic piping in automated equipment, fixtures and packaging machinery.

APKD Series Plastic Push-to-Connect Fittings

APKD Series Plastic Push-to-Connect Fittings

APKD series plastic push-to-connect fittings provide quick connections for pneumatic tubing. Their bodies are made of engineering plastic (PBT or nylon) and fitted with slotted stainless steel or brass sleeves, allowing PU and PA tubing to be quickly connected and disconnected. They accommodate tube outer diameters of Φ4, Φ6, Φ8, and Φ10 mm and thread sizes G1/8, G1/4, G3/8, and G1/2 (codes 01~04). Reducing versions are also available (such as Φ6-Φ4, Φ8-Φ6, and Φ10-Φ8). Operating pressure is 0~1.0 MPa, vacuum pressure is -100 kPa, operating temperature is 0~60°C, and the working medium is compressed air. Easy to install, reliably sealed, and reusable, these fittings are widely used for tubing connections in automated equipment, pneumatic control cabinets, and industrial robot end effectors.

APKD-G Series Plastic Push-In Fittings

APKD-G Series Plastic Push-In Fittings

The APKD-G series consists of plastic push-in fittings with G threaded connections for quick connection and disconnection of tubing in pneumatic lines. Models accommodate tube diameters including ΦD 6/8/10 mm, with thread sizes G1/8 and G1/4. Dimensions include L, A, B, C, ΦD, Φd, H, X1 and X2. Easy to install, these fittings are suitable for automation equipment, pneumatic control systems and general industrial piping. See the individual model tables for dimensions, and confirm the tube diameter, thread size and available installation space when selecting a model.

APU/APV/APE Series Plastic Push-to-Connect Fittings

APU/APV/APE Series Plastic Push-to-Connect Fittings

This series of plastic push-to-connect fittings includes APU, APV and APE configurations for quickly connecting and disconnecting nylon, polyurethane and other pneumatic tubing. The range accommodates metric and imperial tube diameters, with metric sizes from 4 mm to 16 mm and imperial sizes including 5/32, 1/4, 5/16, 3/8 and 1/2 inches. The catalog provides overall and installation dimensions such as D, A/E, d and X to assist with selection and piping design. The push-to-connect design is easy to install and allows repeated connection and disconnection. These fittings are suitable for tubing connections in automation equipment, pneumatic control circuits and various pneumatic actuators.

APY Series Plastic Push-to-Connect Fittings

APY Series Plastic Push-to-Connect Fittings

APY series plastic push-to-connect fittings allow hoses in compressed air lines to be connected and disconnected quickly. They lock on insertion and are easy to remove. The catalog lists 7 sizes from APY04~APY16 for tube diameters D=4~16 mm, along with dimensions A, d and X to help with selection and installation space checks. The fittings have plastic bodies and are suitable for automation equipment, pneumatic control systems and general industrial air lines.

APK Series Plastic Push-in Fittings

APK Series Plastic Push-in Fittings

APK series plastic push-in fittings provide quick connections between tubing and components in pneumatic systems. Their engineering plastic bodies and O-ring seals allow tool-free connection and disconnection with reliable sealing. The series includes metric straight APK fittings, imperial straight APKG fittings, and variants such as APP and APPG(APPK). They accommodate tubing outside diameters of 4, 6, 8, 10, and 12 mm, as well as 5/32, 1/4, 5/16, 3/8, and 1/2 inch. Key dimensions include tube outside diameter D, body length B, bore diameter d, and mounting dimensions F, E, and X, which increase with fitting size. These fittings are widely used to connect tubing in automation equipment, pneumatic actuators, sensor air lines, and other applications.

APKG Series Plastic Push-in Fittings

APKG Series Plastic Push-in Fittings

Plastic push-in fittings allow quick connection and disconnection of nylon and polyurethane tubing in pneumatic systems. The tube locks in place when inserted and can be removed by pressing the release ring, with no tools required. They are widely used in automation equipment, pneumatic fixtures, packaging machinery, and electronics assembly lines. This series is available in both metric and imperial (inch) sizes: APY is a straight type for tube outside diameters of 4–16mm; APK is an extended straight type for 4–12mm; APP is a branch type for 4–12mm; and APKG and APPG are imperial series covering 5/32–1/2 inches. Key dimensions include tube outside diameter D, overall length B, bore diameter d, mounting/thread dimensions F and E, and insertion positioning dimension X. The body is made of engineering plastic, the seals are nitrile rubber, and the fittings are suitable for compressed air.

APP Series Plastic Push-in Fittings

APP Series Plastic Push-in Fittings

APP series plastic push-in fittings are nylon fittings for quickly connecting and disconnecting tubing to threaded ports or other tubing in pneumatic systems. The products are available in metric and imperial tube sizes: metric models use APP followed by the tube diameter, with sizes of 4, 6, 8, 10, and 12 mm; imperial models use APPK followed by the fractional inch size, with sizes of 5/32, 1/4, 5/16, 3/8, and 1/2 inch. The catalog lists external and installation dimensions for each size using D (compatible tube outside diameter), B (overall length), d (through-hole/bore), F, E, X, and other dimensions, making it easier to check insertion depth and installation space when selecting a fitting. The plastic fitting body uses a push-in locking mechanism that requires no tools for assembly: the air tube is inserted directly and held by a self-locking collet to provide a seal. These fittings are widely used in compressed-air circuits in automation equipment, packaging machinery, and electronics assembly lines. The same catalog page also lists plastic push-in fittings in different configurations, such as APY, APK, and APKG (straight, elbow, tee, and others). Select the specific model by combining the configuration code with the tube diameter.

AP Series Plastic Push-in Fittings

AP Series Plastic Push-in Fittings

Plastic push-in fittings provide quick connections for compressed air lines. Their one-touch design seals and locks the tubing upon insertion; pressing the release ring allows it to be removed without tools. The range includes APY straight, APK elbow, APKG imperial elbow, APP branch/T, and APPG imperial branch fittings. Metric sizes cover tube diameters D4~D16, while imperial sizes range from 5/32″~1/2″. The fitting bodies are made of engineering plastic (nylon/POM), and internal O-rings ensure an airtight seal. Key specifications include tube diameter D, external dimensions A/B/E/F/X, and bore diameter d. They are suitable for automation equipment, pneumatic control systems, and similar applications.

APGJ Series Plastic Push-in Fittings

APGJ Series Plastic Push-in Fittings

Plastic push-in fittings are basic components used for quick connection and disconnection of tubing in pneumatic systems. Their bodies are made of engineering plastic, commonly in a composite construction of nylon and nickel-plated brass. Tubing can be inserted and removed without tools, while built-in resilient gripping claws and O-ring seals ensure airtight connections. The series includes APGJ straight and reducing fittings and APLM and APLN straight threaded fittings. APGJ models use the code “APGJ-size-tube diameter” and accommodate tube diameters of 4~20mm, with larger sizes extending to 356. Dimensions specified include the ΦD1 bore, overall length, B, C1, C2 and X. APLM/APLN are straight fittings with male threads (M12~M27), with dimensions L, A, B, C, ΦD, Φd, M, H and X specified. They connect Φ4~Φ16 pneumatic tubing to M12~M27 threaded ports. These products are widely used in automation equipment, pneumatic actuators, and vacuum and compressed air piping systems.

APLM Series Plastic Push-in Fittings

APLM Series Plastic Push-in Fittings

APLM series plastic push-in fittings are straight pneumatic fittings designed for quick connection and disconnection of nylon or polyurethane tubing to pneumatic components with female threads. The injection-molded engineering plastic body contains a stainless steel retaining clip and a rubber seal. The tubing locks and seals automatically upon insertion, allowing tool-free installation and removal for applications requiring frequent tubing changes. The range covers six tube diameters: Φ4, Φ6, Φ8, Φ10, Φ12 and Φ16, with corresponding male threads M12, M14, M16, M20, M22 and M27. Hex widths across flats range from 14~29mm, overall lengths from 33.3~62.6mm, and insertion depths X from 9.9~23.9mm. The same catalog also includes related fittings such as APLN (with a different thread type) and APGJ, whose body dimensions are essentially the same as those of this series. Select fittings according to thread type and tube size.

APLN Series Plastic Push-in Fittings

APLN Series Plastic Push-in Fittings

The APLN series consists of plastic push-in pneumatic fittings for quickly connecting tubing to female-threaded components in compressed air lines. The fitting body is made of engineering plastic, commonly in a nylon and nickel-plated brass composite construction. PU/PA tubing can be inserted directly into the push-in fitting to form a seal without tools, making installation and removal easy. The series is available in 6 sizes: tube outside diameters ΦD of 4, 6, 8, 10, 12, and 16 mm, with corresponding male threads M12, M14, M16, M20, M22, and M27. Overall length L ranges from 33.3 mm to 62.6 mm, width across flats H from 14~29 mm, and insertion-end bore Φd is 3.3 mm or 4.3 mm. Select the model from the reference table according to the tube outside diameter and mounting thread size. These fittings are suitable for pneumatic lines in automation equipment, pneumatic fixtures, packaging machinery, and similar applications.

APXG Series Plastic Push-to-Connect Fittings

APXG Series Plastic Push-to-Connect Fittings

Plastic push-to-connect fittings (one-touch pneumatic fittings) provide quick connections and branching for compressed air lines. Simply insert the tubing to lock it in place, and press the release ring to remove it. They are widely used in automated equipment, jigs and fixtures, and pneumatic actuator piping. This page covers the APXG straight, APL45 elbow, APXT/APPT tee, and APPF subseries, among others. They accommodate tubing with a ΦD outer diameter of 4, 6, 7, 8, 10, or 12 mm. Threaded ends are available with M5 and M6 metric threads and R1/8, R1/4, R3/8, R1/2, G1/8, G1/4, G3/8, and G1/2 pipe threads. Models are also offered in a range of dimensions, including L1~L4, ΦD1, ΦD2, and width across flats. Within each subseries, different tube diameter and thread combinations correspond to different part numbers. Select a fitting based on the tube outer diameter and connection thread.

APXT Series Plastic Push-in Fittings

APXT Series Plastic Push-in Fittings

APXT series plastic push-in fittings provide quick connections for pneumatic lines. Their bodies are made of engineering plastic, and they are suitable for nylon or polyurethane tubing with outside diameters of Φ4, Φ6, or Φ8. Thread options include R1/8, R1/4, R3/8, R1/2, G1/8, G3/8, and G1/2, accommodating connections to various lines and actuators. The fittings lock on insertion, are easy to disconnect, and provide a reliable seal. They are widely used in automation equipment, pneumatic control cabinets, and packaging machinery. Select the model according to the tube outside diameter and thread specification. The typical operating pressure is 0~1.0 MPa, and the operating temperature is approximately -20~60℃.

APPT Series Plastic Push-In Fittings

APPT Series Plastic Push-In Fittings

APPT series plastic push-in fittings provide quick connections for nylon, polyurethane and other tubing in pneumatic lines. Tubing locks in place when inserted and is easy to remove. The series accommodates three tube outside diameters: 4, 6 and 8 mm. Thread sizes include R1/8, R1/4, R1/2, G1/8, G3/8 and G1/2. These fittings are suitable for automation equipment, pneumatic control cabinets and general pneumatic piping. The catalog provides dimensions including L3, ΦD1, ΦD2, L, L1, L2 and φ to facilitate selection and installation.

AP Series Plastic Push-to-Connect Fittings

AP Series Plastic Push-to-Connect Fittings

Plastic push-to-connect fittings (pneumatic push-in tube fittings) provide quick connections between polyurethane or nylon air tubing in sizes such as Φ4, Φ6, Φ8 and Φ12 and M5 or M6 metric threads or R1/8~R1/2 and G1/8~G1/2 pipe threads. The body is made of engineering plastic, with a brass or engineering plastic retaining clip. The push-in design allows tubing to be installed and removed without tools. These fittings are widely used in pneumatic circuits, automation equipment, packaging machinery and electronic assembly lines. The catalog groups fittings by shape and connection type into sub-series including APL45 (elbow), APXG (male-threaded straight), APXT (male-threaded tee), APPT (branch tee) and APPF (straight). Key specifications include compatible tube outside diameter ΦD, thread size R or G, insertion depth, overall length L, outside swing dimensions ΦD1~ΦD4, width across flats φ and segment lengths L1~L4. Select the fitting to match the tube outside diameter and mating thread size. Operating pressure, temperature resistance and media compatibility are governed by general pneumatic fitting specifications.

ASC Series Speed Control Valves

ASC Series Speed Control Valves

ASC series speed control valves control the operating speed of cylinders and other actuators by adjusting the valve needle opening to change the airflow. The valve body is made of materials such as nickel-plated brass and zinc alloy. The plastic body and fitting body can rotate freely for easy adjustment of the tubing direction. The compatible fluid is air only (no other gases or liquids). The operating pressure range is 0.1~1.0 MPa, proof pressure is 1.5 MPa, and operating temperature is 0~60℃. The valves are suitable for PU and nylon tubing. Models cover metric tube diameters of 4, 6, 8, 10, and 12 mm and imperial tube diameters of 5/32, 1/4, 5/16, 3/8, and 1/2 inches. Thread sizes include G1/8, G1/4, G3/8, and G1/2 (G threads), and NPT1/8, NPT1/4, NPT3/8, and NPT1/2 (N threads). By installation type, the valves are classified as exhaust throttling valves (standard installation) and inlet throttling valves (reverse installation).

ASA/ASC Series Flow Control Valves

ASA/ASC Series Flow Control Valves

ASA/ASC series flow control valves (speed control valves) regulate the operating speed of pneumatic actuators such as cylinders. Rotating the adjustment wheel changes the valve opening for stepless speed control: clockwise closes the valve and counterclockwise opens it. The valve body and fitting body can rotate relative to each other, allowing tubing to be connected in any direction. The same valve provides meter-out control when installed in the standard orientation and meter-in control when reversed. The valve body, adjustment wheel and locking wheel are made of nickel-plated copper; the seals are nitrile rubber (NBR), the N-Holder is brass, the zinc sleeve is zinc alloy, and the compression ring is polyoxymethylene (POM). The operating medium is air, with an operating pressure range of 0.1~1.0MPa(15~150psi), a proof pressure of 1.5MPa(225psi), and an operating temperature of 0~60℃(32~140℉). The valves are compatible with PU and nylon tubing. G-thread (ASC…G), NPT-thread (ASC…N), and ASA series models are available in a range of tube sizes.